Full User Manual O2CN817N 5954VCCP02/09 02/10 Xda Guide We’re better, connected 5954 Xda Guide FUM.
Please Read Before Proceeding THE BATTERY IS NOT CHARGED WHEN YOU TAKE IT OUT OF THE BOX. DO NOT REMOVE THE BATTERY PACK WHEN THE DEVICE IS CHARGING. YOUR WARRANTY IS INVALIDATED IF YOU DISASSEMBLE OR ATTEMPT TO DISASSEMBLE THE DEVICE. PRIVACY RESTRICTIONS Some countries require full disclosure of recorded telephone conversations, and stipulate that you must inform the person with whom you are speaking that the conversation is being recorded.
Google, Google Maps and YouTube are trademarks of Google, Inc. in the United States and other countries. Copyright © 2008, Esmertec AG. All Rights Reserved. Copyright © 2003-2008, ArcSoft, Inc. and its licensors. All Rights Reserved. ArcSoft and the ArcSoft logo are registered trademarks of ArcSoft, Inc. in the United States and/or other countries. Copyright © 2004-2008, Ilium Software, Inc. All Rights Reserved.
or implied, arising by law or otherwise, regarding the Weather Information, Data, Documentation, or any other Products and services, including without limitation any express or implied warranty of merchantability, express or implied warranty of fitness for a particular purpose, non-infringement, quality, accuracy, completeness, effectiveness, reliability, usefulness, that the Weather Information, Data and/or Documentation will be error-free, or implied warranties arising from course of dealing or course o
Important Health Information and Safety Precautions When using this product, the safety precautions below must be taken to avoid possible legal liabilities and damages. Retain and follow all product safety and operating instructions. Observe all warnings in the operating instructions on the product. To reduce the risk of bodily injury, electric shock, fire, and damage to the equipment, observe the following precautions.
• Handle battery packs carefully This product contains a Li-ion battery. There is a risk of fire and burns if the battery pack is handled improperly. Do not attempt to open or service the battery pack. Do not disassemble, crush, puncture, short external contacts or circuits, dispose of in fire or water, or expose a battery pack to temperatures higher than 60˚C (140˚F). ARNING: Danger of explosion if battery is incorrectly replaced.
• If the battery leaks: • Do not allow the leaking fluid to come in contact with skin or clothing. If already in contact, flush the affected area immediately with clean water and seek medical advice. • Do not allow the leaking fluid to come in contact with eyes. If already in contact, DO NOT rub; rinse with clean water immediately and seek medical advice. • Take extra precautions to keep a leaking battery away from fire as there is a danger of ignition or explosion.
SAFETY IN AIRCRAFT Due to the possible interference caused by this product to an aircraft’s navigation system and its communications network, using this device’s phone function on board an airplane is against the law in most countries. If you want to use this device when on board an aircraft, remember to turn off your phone by switching to Airplane Mode.
ROAD SAFETY Vehicle drivers in motion are not permitted to use telephony services with handheld devices, except in the case of emergency. In some countries, using handsfree devices as an alternative is allowed. SAFETY PRECAUTIONS FOR RF EXPOSURE • Avoid using your phone near metal structures (for example, the steel frame of a building). • Avoid using your phone near strong electromagnetic sources, such as microwave ovens, sound speakers, TV and radio.
NONIONISING RADIATION Your device has an internal antenna. This product should be operated in its normaluse position to ensure the radiative performance and safety of the interference. As with other mobile radio transmitting equipment, users are advised that for satisfactory operation of the equipment and for the safety of personnel, it is recommended that no part of the human body be allowed to come too close to the antenna during operation of the equipment. Use only the supplied integral antenna.
General Precautions 11 • Avoid applying excessive pressure to the device Do not apply excessive pressure on the screen and the device to prevent damaging them and remove the device from your pants’ pocket before sitting down. It is also recommended that you store the device in a protective case and only use the device stylus or your finger when interacting with the touch screen. Cracked display screens due to improper handling are not covered by the warranty.
• Avoid wet areas Never use the product in a wet location. • Avoid using your device after a dramatic change in temperature When you move your device between environments with very different temperature and/or humidity ranges, condensation may form on or within the device. To avoid damaging the device, allow sufficient time for the moisture to evaporate before using the device.
Contents Chapter 1 Getting Started 23 1.1 Getting to Know Your Touch Phone and Accessories...................................... 24 Top panel......................................................................................................................................24 Left panel......................................................................................................................................24 Right panel......................................................................
1.8 Home Screen...................................................................................................... 41 1.9 Status Icons........................................................................................................ 42 1.10 Start Menu........................................................................................................ 46 1.11 Quick Menu...................................................................................................... 47 1.
People............................................................................................................................................67 Messages......................................................................................................................................69 Mail.................................................................................................................................................70 Footprints.....................................................
Ways to synchronise.............................................................................................................. 100 5.2 Setting Up Windows Mobile® Device Center on Windows Vista®................. 101 Set up synchronisation in Windows Mobile Device Center..................................... 102 Use Windows Mobile Device Center................................................................................ 103 5.3 Setting Up ActiveSync® on Windows XP®.....................................
Create a new e-mail message............................................................................................ 126 Compose and send an e-mail............................................................................................. 127 Filter the Inbox message list............................................................................................... 128 View and reply to messages...............................................................................................
8.4 Using YouTube™...............................................................................................157 Browse for videos.................................................................................................................... 157 Watching videos...................................................................................................................... 159 Bookmarks...........................................................................................................
10.3 HTC Footprints™............................................................................................ 193 Create a footprint.................................................................................................................... 193 Find a previously visited place........................................................................................... 196 Edit a footprint..............................................................................................................
About the screens and menus........................................................................................... 225 Synchronise video and audio files.................................................................................... 226 Play media................................................................................................................................. 228 Playlists...............................................................................................................
12.12 Voice Recorder............................................................................................. 257 12.13 Voice Speed Dial.......................................................................................... 259 12.14 ZIP................................................................................................................. 261 Chapter 13 Managing Your Device 263 13.1 Copying and Managing Files........................................................................
Appendix 285 Index 295 A.1 Specifications................................................................................................... 286 A.2 Regulatory Notices..........................................................................................
Chapter 1 Getting Started 1.1 Getting to Know Your Touch Phone and Accessories 1.2 Installing the SIM Card, Battery, and Storage Card 1.3 Charging the battery 1.4 Using the Strap Holder 1.5 Using the In-Car Holder 1.6 Starting Up 1.7 Navigating On Your Device 1.8 Home Screen 1.9 Status Icons 1.10 Start Menu 1.11 Quick Menu 1.12 Adjusting the Volume 1.
Getting Started 1.1 Getting to Know Your Touch Phone and Accessories Top panel POWER Press to turn off the display temporarily. To turn off the power, press and hold for about 5 seconds. For more information, see “Starting Up” in this chapter. Left panel VOLUME UP During a call or when playing music, press here to increase the volume. VOLUME DOWN During a call or when playing music, press here to lower the volume. Right panel Stylus (See “Stylus” in this chapter for details.
Getting Started 25 Front panel Notification LED * See description below. Earpiece Listen to a phone call from here. GPS Press to launch the GPS navigation software. TALK/SEND • Press to answer an incoming call or dial a number. • During a call, press and hold to toggle the speakerphone on and off. • Press and hold to use Voice Speed Dial. (See Chapter 12 for details.
Getting Started Back panel Speaker 3.2 Megapixel Camera See “Taking Photos and Videos” in Chapter 11 for details. Back Cover Strap Holder See “Using the Strap Holder” in this chapter for details. Bottom panel Microphone Sync Connector/Earphone Jack • Connect the supplied USB cable to synchronise information or plug in the power adapter to recharge the battery. • Connect the supplied USB stereo headset for hands-free conversation or for listening to audio media.
Getting Started 27 Accessories The product package includes the following items and accessories: • Battery • Power adapter • Screen protector • Stereo headset • USB sync cable • Pouch • In-car holder • Car charger • Quick Start Guide • Getting Started and Application discs • 1 GB microSD card (with pre-loaded map content for bundled GPS software) Note To use the supplied map on the microSD card, first insert the microSD card into your device (for instructions, see “To install a micro
Getting Started 1.2 Installing the SIM Card, Battery, and Storage Card You need to remove the back cover before you can install the SIM card, battery and storage card on your device. Also, make sure to always turn off the power before installing or replacing the SIM card and battery. To remove the back cover 1. Make sure your device is turned off. 2. Hold the device securely with the front facing down. 3. With your thumb or finger, lift up the bottom of the back cover. To replace the back cover 1.
Getting Started 29 SIM card The SIM card contains your phone number, service details, and phonebook/ message memory. Your device supports both 1.8V and 3V SIM cards. Note Some legacy SIM cards may not function with your device. You should consult with O2 for a replacement SIM card. There may be fees for this service. Cut-off corner To install the SIM card 1. Make sure your device is turned off. 2.
Getting Started Battery Your device comes with a rechargeable Lithium-ion battery and is designed to use only manufacturer-specified original batteries and accessories. Battery performance depends on many factors, including network configuration, signal strength, the features or settings used, the temperature of the environment and the way in which you operate your device, and more.
Getting Started 31 To install the battery 1. Align the battery’s exposed copper contacts with the battery connectors inside the battery compartment. Ensure that the free end of the ribbon strip is visible above the battery. 2. Insert the contacts side of the battery first and then gently push the battery into place. 3. Replace the back cover. To remove the battery 1. Make sure your device is turned off. 2. Remove the back cover. 3. Pull the ribbon strip upward to release the battery.
Getting Started Storage card To have additional storage for your images, videos, music, and files, you can purchase a microSD™ card and install it into your device. To install a microSD card 1. Remove the back cover. 2. Insert the microSD card into the slot with its gold contacts facing down until it clicks into place. RESET Notes • To remove the microSD card, press it to eject it from the slot. • The maximum size of microSD card supported is 32 GB.
Getting Started 33 1.3 Charging the battery New batteries are shipped partially charged. Before you start using your device, it is recommended that you install and charge the battery. Some batteries perform best after several full charge/discharge cycles. To charge the battery 1. Connect the USB connector of the AC adapter to the sync connector on your device. 2. Plug in the AC adapter to an electrical outlet to start charging the battery.
Getting Started 1.4 Using the Strap Holder The strap holder at the bottom panel of your device allows you to attach a wrist strap, neck lanyard, or string accessory. To attach a strap, lanyard or string accessory to the strap holder 1. Remove the back cover. 2. Insert the loop of the strap, lanyard or string accessory through the small hole at the bottom of the back cover. 3.
Getting Started 35 1.5 Using the In-Car Holder Assemble and install the supplied in-car holder so you can use your device while inside a vehicle. Put together the in-car holder 1. Put the cradle on the base so that the two tabs on the base insert into the corresponding slots on the cradle. 2. Slide the cradle firmly down on the base so that the tabs click into place.
Getting Started Fix the holder in the car 1. Place the suction pad on the base on a smooth surface such as the windshield of the car. 2. Push the lever on the base so that the suction pad attaches firmly to the surface. Warning! Always ensure that the base of the in-car holder is attached firmly to a smooth, stable surface, otherwise it may become detached and fall, causing damage to your device. Put the device in the holder 1. Place the bottom edge of the device in the bottom part of the cradle.
Getting Started 37 Note When the device is on and you put it in the holder, NaviPanel automatically opens and offers you a convenient, one-touch interface to Footprints, the phone, and the GPS navigation software. For more information about NaviPanel, see Chapter 10. Remove the device from the holder 1. Pull the upper edge of the cradle slightly upwards, and with your fingers in the hole behind the cradle, push so that the device clicks out. 2. Lift the device out of the cradle, holding it firmly.
Getting Started 1.6 Starting Up After installing your SIM card and battery and charging the battery, you can now power on and start using your device. Turn your device on and off To turn on the power 1. Press the POWER button. 2. When you turn on your device for the first time, a Quick Start Wizard guides you to set up time zone, date and time, and password. For more information about these settings, see Chapter 13.
Getting Started 39 1.7 Navigating On Your Device There are different ways you can navigate and interact with the interface of your device. Finger-touch control A quick and easy way to interact with the home screen and the whole interface of your device is by touch.
Getting Started Slide Sliding on the touch screen also involves dragging with your finger, but you need to press and hold your finger with some pressure before you start to drag. While dragging, do not release your finger until you have reached the target position. The following are some instances when you would use sliding: • Switching between Home screen tabs Slide your finger left and right to switch between the Home screen tabs.
Getting Started 41 Navigation Wheel On the home screen and in many programs on your device, you can use the Navigation Wheel to move through menus and instructions. Rotate the wheel or press the control up, down, left, and right to move around the screen. When an item has been selected on the screen, press the ENTER button (the centre button) to confirm your selection. In some programs such as Camera and Opera Mobile, you can also rotate the wheel to zoom in or out. 1.
Getting Started 1.9 Status Icons When you touch or tap the icon area of the title bar, the System Status screen opens and displays larger status icons so you can touch them with your finger more easily and accurately. Tip The System Status screen can be disabled in TouchFLO settings. See “Settings on your Device” in Chapter 13 for details. The following are some of the status icons that you may see on the device.
Getting Started 43 1 Icon Description Bluetooth stereo headset connected Bluetooth on Bluetooth visible mode on Multiple notifications; tap the icon to view all New text messages; SMS notification of voice mail Sending MMS Receiving MMS MMS sent Cannot send MMS New incoming MMS New Windows Live™ message Missed call Speakerphone on Roaming Alarm Other wireless network(s) detected Wired headset connected
Getting Started 2 Icon Description GPRS available Icon Description HSDPA in use GPRS connecting GPRS in use WCDMA/UMTS available WCDMA/UMTS connecting EDGE available WCDMA/UMTS in use EDGE connecting Connected to a wireless network EDGE in use Connection is active HSDPA available HSDPA connecting 3 Icon Description Maximum signal strength No signal Phone is turned off No phone service Searching for phone service Voice call in progress Connection is not active Synchronisation in progress
Getting Started 45 Icon Description Call on hold Calls are forwarded Dialling while no SIM card is inserted No SIM card inserted 4 Icon Description Vibrate mode Sound on Sound off 5 Icon Description Battery charging Battery full Battery low
Getting Started 1.10 Start Menu The Start menu, which can be opened from the top left corner of the screen, gives you access to all the programs and settings of your Windows Mobile-powered device. Touch or tap to select an item on the Start menu. Open the Start menu. Open a recently-used program. When you are on another screen, touch or tap this item to return to the TouchFLO Home screen. Open a program. Access more programs. View and change settings. View Help information for the current screen.
Getting Started 47 1.11 Quick Menu The Quick menu, which can be opened from the top right corner of the screen, shows the currently running programs. You can quickly switch between running programs, stop programs, and see how much program memory is being used. Customise Task Manager settings. (See “Using Task Manager” in Chapter 13.) Stop all currently running programs. Touch this icon to open the Quick Menu. Shows the total percentage of program memory in use. Touch to open the Memory settings screen.
Getting Started 1.12 Adjusting the Volume Adjusting the system volume changes the volume level of sound notifications and audio/video playback, whereas adjusting the ring volume affects only the volume of the phone ring. The system volume and ring volume can be separately adjusted. 1. Touch the icon area in the title bar and then touch the Speaker icon ( the System Status screen. ) on 2. To switch between the Ring Volume and System Volume screens, touch Ring or System on top of the screen. 3.
Getting Started 49 1.13 When Connecting Your Device to a Computer Whenever you connect your device to the computer with the USB cable, the Connect to PC screen will be displayed and will prompt you to choose the type of USB connection: ActiveSync Select this mode when you need to do the following: • Synchronise Outlook e-mail messages, contacts, calendar appointments, files, and other data between your device and your computer. • Have read and write access to the whole device.
Getting Started When Disk Drive mode is enabled while your device is connected to the computer: • You will not be able to use your device to access files from the storage card or run applications that are installed on the storage card while the device is connected to your computer. • Your computer will only connect to the device’s storage card. When you access your device from the computer, you will only see the contents of the device’s storage card.
Chapter 2 Using Phone Features 2.1 The Phone Screen 2.2 Making Calls 2.3 Answering and Ending Calls 2.4 Call History 2.5 Speed Dial 2.6 Turning the Phone Function On and Off 2.
Using Phone Features 2.1 The Phone Screen Like a standard mobile phone, you can use your device to make, receive, and keep track of calls and send text messages. To open the Phone screen, do one of the following: • On the Home screen, tap Phone. • Press the ����������������� TALK/SEND button. TALK/SEND button Enter your PIN Most SIM cards are preset with a PIN (personal identification number) that is provided by your wireless service provider. 1.
Using Phone Features 53 2.2 Making Calls To make a call, you can either dial a number or select a contact you want to call. Make a call from the Phone screen The Phone’s Smart Dial feature makes it quick and easy for you to place a call. When you start entering a phone number or contact name, Smart Dial automatically searches and sorts the contact entries on the SIM card, in Contacts, and the phone numbers in Call History (including incoming, outgoing, and missed calls).
Using Phone Features 3. Tap to close the phone keypad and to see if there are more matching numbers or contacts in the Smart Dial panel. To browse through the filtered list, flick through the list, slide your finger up or down the list slowly, or press NAVIGATION up/down. Smart Dial panel 4. To call a number or contact, do one of the following: • Tap the desired phone number or contact from the list.
Using Phone Features 55 Make a call from Contacts On the Home screen, tap Start > Contacts to open the Contacts screen. Do one of the following: • Select the contact to call and then press TALK/SEND. Note If the contact has more than one number stored, press NAVIGATION right/left to select the number you want to call before pressing TALK/SEND. • Tap the contact to open the contact details and then tap the phone number you want to call.
Using Phone Features Make an international call 1. Tap and hold the number 0 key on the Phone screen until the plus (+) sign appears. The plus (+) sign replaces the international prefix of the country that you are calling. 2. Enter the full phone number you want to dial, and press the TALK/SEND button on your device. The full phone number includes the country code, area code (without the leading zero, if any), and phone number. Call voice mail Number 1 is generally reserved for your voice mail.
Using Phone Features 57 To reject a call and send a text message When you reject a call, you can choose to automatically send a text message to the mobile phone of the caller. 1. On the Phone screen, tap Menu > Options > Advanced tab. 2. Select the Reject call with text message check box. 3. Change the default text message if needed, then tap OK. When Reject call with text message is enabled, tap Send Text when the phone rings to reject the call and send the text message to the caller.
Using Phone Features To put a call on hold Your device notifies you when you have another incoming call, and gives you the option of rejecting or accepting the call. If you are already on a call and accept the new call, you can choose to switch between the two callers, or set up a conference call between all three parties. 1. Press the TALK/SEND button to take the second call and put the first call on hold. 2. To end the second call and return to the first call, tap End Call or press END on your device.
Using Phone Features 59 Tap to toggle between turning on or off the microphone. When the microphone is turned off, the mute icon appears on the screen. To access the TouchFLO Home tab during a call 1. If the display is turned off, press the POWER button to turn it on. 2. Press and hold the END button. To end a call When a call is in progress, tap End Call or press the END button to hang up.
Using Phone Features 2.4 Call History Use Call History to check for missed calls, dialled numbers, and calls received. To open the Call History screen, tap Menu > Call History on the Phone screen. If you have a long list of calls in the Call History, tap one of the buttons at the bottom of the screen to filter the list according to the type of call. All Calls Received Missed Dialled 2.5 Speed Dial Use Speed Dial to call frequently-used numbers with a single tap.
Using Phone Features 61 4. In Location, select an available key to use as the speed dial key. 5. Tap OK. Tips • To create a Speed Dial entry from Contacts or SIM card contacts, tap the contact, select the number you want to add to Speed Dial, then tap Menu > Add to Speed Dial. • To delete a Speed Dial entry, in the Speed Dial list, tap and hold the desired entry, then tap Delete. 2.
Using Phone Features 2.7 Setting Up Bluetooth SIM Access for Car Kit Phones Bluetooth car kits that support the SIM Access Profile (SAP) can connect to your device and access its SIM card via Bluetooth. Once a SAP connection has been established, you can download SIM contacts from your device to the car kit phone. You can also use the car kit phone to answer and make calls using your device’s SIM card.
Chapter 3 TouchFLO™ 3.1 About TouchFLO™ 3.2 Using the TouchFLO Home Screen 3.
TouchFLO™ 3.1 About TouchFLO™ TouchFLO™ gives you touch control over your Windows Mobile-powered device. TouchFLO provides the following features: • A Home screen that allows finger-touch access to the most widely-used functions, such as People, Messages, Mail, Music, Internet, and more • Finger gestures that allow you to navigate screens 3.
TouchFLO™ 65 To switch between the tabs of the Home screen Do one of the following: • Touch or tap the desired tab on the Home screen. • Press Navigation Right or Left to move to the next or previous tab. • Press and hold your finger on the active tab, then slide your finger right or left over the tabs. Release when you have selected the desired tab. Note Apply some pressure when pressing and holding on the active tab to be able to slide over the tabs.
TouchFLO™ Home The Home tab displays the current date, an analogue and digital clock, and a yellow alarm hand that indicates whether the alarm is on or off. Missed calls and your upcoming calendar appointment are also shown on the Home tab. To select an item on the Home tab • Touch the item; or • Press Navigation Up or Down first to navigate to the item you want to select and then press ENTER. Touch this area to open the Clock & Alarms screen where you can set the date, time, and alarm.
TouchFLO™ 67 People On the People tab, you can add favourite contacts who you most frequently communicate with. This allows you to quickly make calls, send text messages, and send e-mails to your favourite contacts. Tip You can add up to 12 favourite contacts on the People tab. To add a favourite contact 1. On the Home screen, slide your finger to the People tab. 2. Touch an empty slot on the screen. 3. On the Select a Contact screen, touch the name of the desired contact.
TouchFLO™ The following icons will appear below the pictures to indicate the type of contact information that is associated to each favourite contact: Mobile phone Home phone Work phone E-mail SMS text messaging To choose from your favourite contacts • Swipe your finger up to scroll down the favourite contacts on the screen, or swipe your finger down to scroll up. • Touch the area below the contact picture to place a call, send a text message, or send an e-mail to the favourite contact.
TouchFLO™ 69 Messages On the Messages tab, you can read SMS text messages as they arrive and create a new SMS text message. You can also view the text of received MMS messages on this tab. When there are new incoming SMS/MMS messages, the icon on the Messages tab will show the number of new messages. For example, indicates that there is a new message received. Touch this icon to create a new SMS text message. To view the entire message thread from the sender and reply, touch the message on the screen.
TouchFLO™ Mail The Mail tab is where you send and receive e-mail messages. Including Outlook E-mail, you can add up to seven POP3/IMAP4 and web-based e-mail accounts in this tab. To add an e-mail account 1. On the Home screen, slide your finger to the Mail tab. 2. If this is your first time to add an e-mail account, touch New Account at the bottom-left side of the screen. 3. Set up your e-mail account using the E-mail Setup wizard. 4.
TouchFLO™ 71 Tips • On the Mail tab, touch Inbox at the lower-left side of the screen to access all e-mail messages of the currently selected account. • To manually download e-mail messages for the currently selected account, touch Menu > Send/Receive. For more information about working with e-mail messages, see Chapter 6 and 7. Footprints On the Footprints tab, you can take photos of places you visit and store them together with information about those places.
TouchFLO™ 4. Point the camera at the scene you want to record location information for. Footprints starts using GPS to search for your position. Note The GPS signal strength is indicated by the bars at the bottom left of the screen. The more blue bars that are shown, the stronger the signal, and the quicker your position will be found. 5. Press the ENTER button to capture the photo. Your photo is then displayed and you can add more location information.
TouchFLO™ 73 To browse footprints You can organize footprints in categories for convenient browsing. Create a new footprint. To flip through footprints, swipe your finger upward/ downward, rotate the NAVIGATION WHEEL, or press Navigation Up/Down. To view the detailed location information, touch the photo. Open the Footprints program and access all footprints. For more information about using Footprints, see Chapter 10. Touch a category icon to browse the entries in that category.
TouchFLO™ Internet On the Internet tab, you can open Opera Mobile™ to browse the web and add web favourites for one-touch access to your favourite web sites. Touch here to browse the web using Opera Mobile. Touch All Bookmarks to open Opera Mobile and add, view or delete web favourites. Swipe upward or press Navigation Down to scroll down the screen and access more web favourites. For more information about using Opera Mobile, see Chapter 8.
TouchFLO™ 75 To set an album as a Favourite 1. On the Photos and Videos tab, touch Album to open the Album program. 2. Touch Albums and then select one of the listed favourite albums. 3. Tap Menu > Set Album as Favourite and then tap OK on the confirmation screen. To view photos and videos Touch here to take a photo. Touch the photo or video on the screen to view or play it in full screen. Touch here to open the Album program. (See “Viewing Photos and Videos Using Album” in Chapter 11 for details.
TouchFLO™ Music The Music tab allows you to visually browse through albums and music tracks and play music. The albums and music tracks that you see on the Music tab are from a selected category or playlist in the Library. Note Your device searches for all music files that have the following audio formats: MP3 (.mp3), WMA (.wma), AAC/AAC+/eAAC+ (.aac), and MPEG-4 (.m4a).
TouchFLO™ 77 To move forward or backward in the music Do one of the following: • Touch and hold on the thin bar below the album art to display the progress bar: Drag your finger right or left on the progress bar to move forward or backward in the current music. • Rotate the NAVIGATION WHEEL as follows: Rotate clockwise to advance forward in the music Rotate anticlockwise to move backward in the music To set repeat and shuffle modes Touch Menu > Repeat to loop the songs.
TouchFLO™ To select music from Audio Manager Audio Manager organises music into categories, such as Artists, Album, Genre, All Songs, and more. After you have added more albums or music tracks to your device, go to Audio Manager to choose the new albums or music tracks that you want to play. 1. On the Music tab, touch Library. 2. Audio Manager displays the All Songs category which lists all the song tracks found on your device. Touch any song in the list to play it on the Music tab.
TouchFLO™ 79 Weather The Weather tab shows you the current weather as well as weather information for the next four days of the week. To add a city The Weather tab can display weather information of your local city and other added cities. Follow the steps below to add a city on this tab. Tip You can add up to 10 cities on the Weather tab. 1. On the Weather tab, tap Menu > Add Location. The Select City screen then appears. 2.
TouchFLO™ To customise weather settings 1. On the Weather tab, touch Menu > Settings. 2. You can choose from the following options: • Download weather data automatically. When this option is selected, weather information is automatically downloaded from the AccuWeather web site whenever you select the Weather tab, if the data has not been updated within the last three hours. Weather data is also downloaded every time an ActiveSync connection is established (through over-the-air or USB connections).
TouchFLO™ 81 Map Search The Map Search tab uses Google Maps to search for locations and display maps. On this tab, you can type in and search for a street address or for places of interest near your current location, such as restaurants, hotels, and more. To search for a location Enter the street address or a place of interest (such as hotel, restaurant, or others) in the search bar. Tip Tap this icon to perform the search.
TouchFLO™ Settings The Settings tab allows you to synchronise information with your computer or the Exchange Server, select a phone profile and other sound settings, and choose a different wallpaper for the Home tab. You can also easily turn on and off the communications features of your device such as Wi-Fi and Bluetooth, and change what location data is sent and received on your device.
TouchFLO™ 83 To set sounds or notifications for events To personalise your device with unique sounds or notifications for different events such as missed calls, new SMS, and more, touch Sounds on the Settings tab and then touch Advanced. For more information about setting sounds and notifications, see “To choose how to be notified about events or actions” in Chapter 13. To change the background image You can change the background image of the Home tab by following these steps: 1.
TouchFLO™ Programs The Programs tab allows you to add your favourite programs for one-touch access. Touch a program icon to open the corresponding program. Touch an empty slot to add a favourite program. Touch All Programs to access all the programs of your device. Touch Remove to choose which program to remove from the Programs tab. When you have filled up the screen with programs, scroll down the Programs tab to access more empty slots and add more programs.
TouchFLO™ 85 3.3 Finger Gestures You can use finger gestures to scroll, zoom and pan on the touch screen. Finger scrolling Finger scrolling can be used to scroll up and down web pages, documents, and lists such as the contacts list, file list, message list, calendar appointments list, and more. When finger scrolling, swipe or flick your finger on the touch screen. To scroll up and down • To scroll down, swipe your finger upward on the touch screen.
TouchFLO™ Finger zooming The type of finger gesture to use when zooming varies in different programs. • To zoom in on a web page in Opera Mobile, tap your finger twice on the screen. See “Using Opera Mobile” in Chapter 8 for details. • To zoom in on a photo in Album, make a full-circle swipe on the touch screen. See “Viewing Photos and Videos Using Album” in Chapter 11 for details.
Chapter 4 Entering Text 4.1 Selecting an Input Method 4.2 Using the Full QWERTY 4.3 Using the Compact QWERTY 4.4 Using the Phone Keypad 4.5 Using Multitap and T9 Modes 4.6 Using Numeric and Symbol Mode 4.7 Using Block Recognizer 4.8 Using Letter Recognizer 4.
Entering Text 4.1 Selecting an Input Method When you start a program or select a field that requires text or numbers, the Input Panel icon becomes available on the menu bar. Tap the Input Selector arrow (that appears next to the Input Panel icon) to open a menu where you can select a text input method and customise input options. After selecting a text input method, the corresponding Input Panel is displayed, which you can use to enter text.
Entering Text 89 4.2 Using the Full QWERTY The Full QWERTY is a full on-screen QWERTY keyboard layout similar to a desktop PC keyboard. Tip You can also use the Windows Mobile on-screen keyboard which also has a QWERTY keyboard layout by selecting Keyboard (or Other Input Methods > Keyboard) on the Text input method menu. • Tap to enter letters or symbols. • Tap and hold to enter a punctuation mark, symbol, or number that appears on top of a key. • Tap to enter an uppercase letter.
Entering Text 4.3 Using the Compact QWERTY The Compact QWERTY is a type of on-screen keyboard which features 20 keys. With its large, touch-friendly keys and enhanced features such as T9 predictive input, you can enter text faster and more accurately. • Tap to enter letters or symbols. • Tap and hold to enter a punctuation mark, symbol, or number that appears on top of a key Displays the word candidate list in T9 mode. Tap a word to insert it into your text. Tap to add a word to the T9 dictionary.
Entering Text 91 4.4 Using the Phone Keypad The Phone Keypad is a 12-key on-screen keypad that has a layout similar to mobile phone keypads, plus some additional keys. The Phone Keypad has large keys and enhanced input features such as T9 predictive input, which makes it faster for you to enter text in your messages and documents. Displays the word candidate list in T9 mode. Tap a word to insert it into your text. Tap to add a word to the T9 dictionary. • Tap to enter letters or symbols.
Entering Text 4.5 Using Multitap and T9 Modes When using the on-screen keyboards, you can choose to enter text using Multitap or T9 mode. Multitap mode In Multitap mode (for Compact QWERTY and Phone Keypad), enter a character by tapping a key until the desired character is displayed on the screen. • To enter the first letter that shows on a key, tap the key once. To enter the second letter, tap twice.
Entering Text 93 To add a word to the T9 dictionary If the word that you have entered is not found in the dictionary, you can add it to the dictionary. 1. While in T9 mode, type a letter and then tap candidate list. on right side of the word 2. Type the word you want to add and then tap . Tap to not add the word. To customise Touch Input settings 1. Tap the Input Selector arrow, then tap Touch Input Settings. 2.
Entering Text 4.6 Using Numeric and Symbol Mode Switch to Numeric and Symbol mode to let you easily enter numbers and common symbols such as parentheses, braces, currency signs, punctuation marks, special characters, and more. Numeric and Symbol mode is available when using the Full QWERTY, Compact QWERTY, and Phone Keypad. Tap a number or symbol to insert it into your text. Tap to go to the previous or next page of symbols. See “To lock the keyboard in Numeric and Symbol mode.
Entering Text 95 To lock the keyboard in Numeric and Symbol mode By default, the keyboard returns to the letter keyboard layout after you enter a symbol. If you need to enter several symbols consecutively, you can set the keyboard to remain in Numeric and Symbol mode. 1. Tap the Input Selector arrow and then tap Other Input Methods > Options. 2. In the Input Method tab, select a Touch input method in the Input method list, and then tap Options. 3. Clear the Turn on one-touch symbol entry check box.
Entering Text 4.8 Using Letter Recognizer With Letter Recognizer, you can write individual letters, numbers, and punctuation marks, which are then converted into typed text. To use Letter Recognizer 1. From a program, tap the Input Selector arrow and then tap Other Input Methods > Letter Recognizer. 2. Write characters, numbers, and symbols in the designated writing area. • Enter uppercase letters by writing in the ABC (left) area of the box.
Entering Text 97 To enter punctuation and symbols Transcriber comes with an on-screen keyboard that provides an easy way to add punctuation or a special symbol to existing text. To use this on-screen keyboard, tap on the Transcriber toolbar. The keyboard remains visible until you tap the button again. Tips • To reposition the keyboard, tap and hold the title bar, then drag to the desired location.
Entering Text
Chapter 5 Synchronising Information With Your Computer 5.1 About Synchronisation 5.2 Setting Up Windows Mobile® Device Center on Windows Vista® 5.3 Setting Up ActiveSync® on Windows XP® 5.4 Synchronising With Your Computer 5.5 Synchronising via Bluetooth 5.
Synchronising Information With Your Computer 5.1 About Synchronisation You can take information from your computer wherever you go by synchronising them to your device.
Synchronising Information With Your Computer 101 • Using Bluetooth. You must first set up a Bluetooth partnership between your device and your computer before you can synchronise information between them using Bluetooth. For more information about setting up a Bluetooth partnership, see Chapter 9. For information about synchronising through Bluetooth, see “Synchronising via Bluetooth” later in this chapter.
Synchronising Information With Your Computer Set up synchronisation in Windows Mobile Device Center When you connect your device to your computer and start Windows Mobile Device Center for the first time, you are asked to create a Windows Mobile partnership with your device. To create a partnership: 1. Connect your device to your computer. Windows Mobile Device Center configures itself, then opens. 2. On the license agreement screen, click Accept. 3.
Synchronising Information With Your Computer 103 Use Windows Mobile Device Center To open Windows Mobile Device Center, click Start > All Programs > Windows Mobile Device Center on your Windows Vista computer. On Windows Mobile Device Center, you can do the following: • Click Mobile Device Settings to change synchronisation settings.
Synchronising Information With Your Computer 5.3 Setting Up ActiveSync® on Windows XP® The Getting Started disc that comes with your device contains Microsoft ActiveSync 4.5 or later. Follow the steps in this section to install and set up ActiveSync on Windows XP or other compatible Windows systems. Note For a list of compatible Windows systems, go to http://www.microsoft.com/windowsmobile/activesync/activesync45.mspx. Install ActiveSync 1.
Synchronising Information With Your Computer 105 When you finish the wizard, ActiveSync synchronises your device automatically. Notice that Outlook e-mails and other information appear on your device after synchronisation. 5.4 Synchronising With Your Computer Connect and synchronise your device with your computer using the USB cable or Bluetooth connection. Start and stop synchronisation You can manually synchronise either from your device or computer.
Synchronising Information With Your Computer Change which information is synchronised You can change the information types and the amount of information to synchronise for each type either on your device or your computer. Follow the steps below to change synchronisation settings on your device. Note Before changing synchronisation settings on your device, disconnect it from your computer. 1. In ActiveSync on your device, tap Menu > Options. 2.
Synchronising Information With Your Computer 107 Troubleshoot sync connection problem In some cases, when the computer connects to the Internet or a local network, it may disconnect the connection with your device in favour of the Internet or network connection. If this happens, tap Start > Settings > Connections tab > USB to PC, then clear the Enable faster data synchronization check box. This makes your computer utilise a serial USB connection with your device. 5.
Synchronising Information With Your Computer 5.6 Synchronising Music and Video If you want to carry your music or other digital media along with you while you travel, set up Windows Media® Player on your computer to synchronise music and video with your device. Other than selecting the Media information type to be synchronised, all media synchronisation settings must be set in Windows Media® Player.
Chapter 6 Exchanging Messages 6.1 Messaging 6.2 Text Messages 6.3 MMS 6.4 Types of E-mail Accounts 6.5 E-mail Setup Wizard 6.
Exchanging Messages 6.1 Messaging Messaging is a central location where you will find all types of messaging accounts, which include text messages (SMS), multimedia messages (MMS), and e-mail accounts. To select a messaging account Do one of the following: • On the TouchFLO Home screen, slide to the Mail tab and then touch Menu > Accounts > Accounts. The Account Picker screen then opens where you can select an account. Tip • You can also tap Start > Messaging to access the Account Picker screen.
Exchanging Messages 111 4. Select the Use signature with this account check box. 5. In the provided text box, enter the information that will be displayed as your signature. 6. If you want the signature to be added whenever you reply or forward messages, select the Use when replying and forwarding check box, then tap OK. 7. Repeat the steps to add a signature to other messaging accounts. 6.2 Text Messages Send short text messages (SMS) to other mobile phones. SMS messages have a 160-character limit.
Exchanging Messages From the Account Picker screen 1. Tap Start > Messaging > SMS \ MMS. 2. Tap Menu > New > SMS. From the Contacts screen 1. Tap Start > Contacts. 2. Tap the contact’s name to open his or her contact card. 3. Touch Send text message. Compose and send a text message After creating a new text message, follow the steps below to enter your message and then send it. 1. To add recipients, enter their mobile phone numbers in the To field, separating them with a semicolon.
Exchanging Messages 113 Manage text messages Text messages that are sent to and received from a contact (or number) are grouped as a single thread in your inbox. Threaded SMS lets you see exchanged messages (similar to a chat program) with a contact on the screen. To reply to a text message 1. In the SMS \ MMS inbox, tap a message thread to open it. 2. At the bottom of the screen, type your reply message and then tap Send.
Exchanging Messages To copy a message in the thread to the SIM card 1. In the SMS \ MMS inbox, tap the message to open it. 2. Use the Navigation Up or Down control to select a message in the thread that you want to copy to the SIM card. Note You cannot copy a sent message from the thread to the SIM card. 3. Tap Menu > Copy to SIM. To copy a text message from the SIM card to the device 1. In the SMS \ MMS inbox, select the SIM message you want to copy. 2. Tap Menu > Copy to Phone.
Exchanging Messages 115 To reply to a text message with an MMS message You can reply to a text message in a thread or to a SIM text message using an MMS message. 1. In the SMS \ MMS inbox, tap a message thread to open it. 2. Tap Menu > Insert, and then in the menu, select the item you want to insert: Picture/Video, Audio or Attachment. Tip Tap Menu > Advanced Composer after adding a picture/video, audio, or attachment to compose an MMS message complete with text, emoticons, media and attachments. 3.
Exchanging Messages To configure MMS message settings 1. Tap Start > Messaging > SMS \ MMS. 2. Tap Menu > MMS Options. The Settings screen then appears. 3. In the Preferences tab, choose from the available options according to your needs. 4. Tap the Servers tab and check if your device is preset with MMS server settings. If there are no preset settings, tap New and enter the following information, which you obtained from your wireless service provider: • • • • • • Gateway.
Exchanging Messages 117 5. Tap Done. Notes • Your Xda comes with MMS settings already configured. It is recommended that you do not change these. If you change the preset settings, your device may not be able to send and receive MMS messages. • If you add several MMS message service providers to the Settings screen, you can choose one as your default provider. Select the provider's name in the list, then tap Set As Default.
Exchanging Messages 6. Enter text and insert audio clips by tapping the respective areas. See “To add text to an MMS message” and “To add an audio clip to an MMS message” for details. 7. To add more slides, tap or tap Menu > Slides > Insert Slide. Repeat steps 5 and 6 to insert photos/videos, text, and audio onto your slides. 8. Tap Send to send the MMS message. Tip You can also send an MMS message from Pictures & Videos, Album, or the Camera program.
Exchanging Messages 119 To add an audio clip to an MMS message You can add one audio clip per slide in your MMS message. 1. Tap Insert audio on your MMS message. By default, My Documents will be shown. Tap My Music or another folder that contains audio files. When navigating folders, tap the down arrow ( ) to return to the upper folder. 2. Select an audio file. When selected, you can: • Tap • Tap Select to insert it into your MMS message.
Exchanging Messages To reply to an MMS message 1. In the SMS \ MMS inbox, press Navigation Up or Down to select the mobile phone number or name of the contact who sent you the MMS message. 2. In the threaded message, MMS messages will have the to open and view an MMS message. icon. Tap this icon 3. After viewing the MMS message, tap Menu > Reply > via MMS to reply with an MMS message or tap Menu > Reply > via SMS to reply with a text message.
Exchanging Messages 121 6.4 Types of E-mail Accounts You can set up the following types of e-mail accounts on your device: • Outlook e-mail that you sync with your computer or the Exchange Server. • E-mail account that you have from an Internet Service Provider (ISP) or other e-mail provider. • Web-based e-mail accounts such as Gmail®, Yahoo!® Mail Plus, O2, and others. • Work account that you access using a VPN connection.
Exchanging Messages 6.5 E-mail Setup Wizard Windows Mobile’s E-mail Setup wizard walks you through the process of setting up your e-mail account. It has an Auto Setup feature which can automatically set up your e-mail account based on the e-mail address and password that you enter, if your e-mail provider settings are preconfigured on your device.
Exchanging Messages 123 4. Enter Your name and the Account display name and then tap Next. Note If the E-mail Setup wizard was unsuccessful in finding and downloading settings from the Internet, select Internet e-mail from the Your e-mail provider list on the next screen. You will be asked to enter e-mail server settings. See “To specify e-mail server settings” for details. 5.
Exchanging Messages To customise download and format settings Before you tap Finish when setting up your POP3 or IMAP4 e-mail account, you can tap the Review all download settings link at the bottom of the screen to choose download options, message format, and other settings.
Exchanging Messages 125 Set up a custom domain e-mail When you are using an e-mail domain name that is hosted by a different e-mail provider (for example, your e-mail address may be Benjamin@startup.com but Email.com hosts the e-mail account and provides e-mail services), select the Custom Domain option in the E-mail Setup wizard to set up your e-mail account on your device. 1. Add a new e-mail account. See “Add an e-mail account” for instructions. 2.
Exchanging Messages 6.6 Using E-mail After setting up e-mail accounts on your device, you can start sending and receiving e-mail messages. Create a new e-mail message Depending on your preference, there are two ways you can create a new e-mail message. To start from an empty message 1. On the TouchFLO Home screen, slide to the Mail tab. 2. Select the e-mail account you want to use on the right side of the screen. 3. Touch the New Mail icon ( ) to create a new e-mail.
Exchanging Messages 127 Compose and send an e-mail After creating a new e-mail, follow the steps below to enter your message and then send it. 1. To add recipients, enter their e-mail addresses, separating them with a semicolon. You can also tap To if you want to add e-mail addresses stored in Contacts. 2. Enter a subject and compose your message. Tip To choose from preset messages, tap Menu > My Text and tap a desired message. To check the spelling, tap Menu > Spell Check. 3. Tap Send.
Exchanging Messages Filter the Inbox message list When the Inbox on your device is full of messages, you can filter your Inbox to display only the messages that contain a particular sender or subject you are searching for. To filter your Inbox Enter the sender name or e-mail subject you want to look for. As you type characters, the message list narrows down to the sequence of characters you have entered.
Exchanging Messages 129 View and reply to messages To download a complete e-mail By default, each e-mail received in the inbox on your device contains only the first few kilobytes of the message. When you open an e-mail, it displays only the headers and part of the message. You must download the whole e-mail to view the complete content.
Exchanging Messages To download file attachments • POP3 e-mail account: File attachments of a POP3 Internet e-mail account are automatically downloaded when you download a complete e-mail. • IMAP4 and Outlook e-mail accounts: File attachments appear below the subject of an e-mail message. Tapping an attachment opens the attachment if it has been fully downloaded or marks it for download the next time you send and receive e-mail. You can set automatic download of file attachments.
Exchanging Messages 131 Synchronise e-mails Synchronising e-mails ensures that new e-mails are downloaded to the device Inbox folder, e-mails in the Outbox folder are sent, and e-mails deleted from the server are removed from your device. The manner in which you synchronise e-mails depends on the type of e-mail account you have. To automatically synchronise an Outlook e-mail account 1. Connect your device to your computer through USB or Bluetooth.
Exchanging Messages To change the download size and format for Internet e-mail 1. Tap Menu > Options on the Account Picker screen, or tap Menu > Tools > Options while you’re in a message list. 2. Tap your POP3 or IMAP4 Internet e-mail account. 3. Tap Download Size Settings. 4. Under Message format, select HTML or Plain Text. 5. Under Download size limit, select the desired e-mail size. 6. Tap Done. To automatically receive attachments on Outlook e-mails 1. Tap Start > Programs > ActiveSync. 2.
Chapter 7 Working With Company E-mails and Meeting Appointments 7.1 Synchronising with the Exchange Server 7.2 Working With Company E-mails 7.3 Managing Meeting Requests 7.
Working With Company E-mails and Meeting Appointments 7.1 Synchronising with the Exchange Server To keep up-to-date with your company e-mails and meeting schedules while you’re out of the office, you can connect your device to the Internet through Wi-Fi or a data connection and synchronise with your company’s Exchange Server. Set up an Exchange Server connection Before you can synchronise or access information on the Exchange Server, you need to set up an Exchange Server connection on your device.
Working With Company E-mails and Meeting Appointments 135 9. Select the items that you want to sync with the Exchange Server. Tips • To change synchronisation settings of an information item, for example, E-mail, select the item, then tap Settings. • To change the rules for resolving synchronisation conflicts, tap Menu > Advanced. 10. Tap Finish.
Working With Company E-mails and Meeting Appointments 7.2 Working With Company E-mails Your device gives you instant access to your company e-mails and lets you manage your messages easier. Direct Push, Fetch Mail, Remote e-mail search, and e-mail flags are just some of the tools you can use to manage your e-mails. Note Some messaging features depend on the Microsoft Exchange Server version used in your company. Check with your network administrator for the availability of these features.
Working With Company E-mails and Meeting Appointments 137 To turn on Direct Push in ActiveSync 1. Tap Start > Programs > ActiveSync and then tap Menu > Schedule. 2. Select As items arrive in the Peak times and Off-peak times boxes. Note When Direct Push is off, you need to manually retrieve your e-mails. Scheduled synchronisation If you do not want to use Direct Push, you can set a regular schedule for synchronising Outlook e-mail and information. 1. In ActiveSync on your device, tap Menu > Schedule. 2.
Working With Company E-mails and Meeting Appointments 3. By default, only the first few words of the message is shown. To download the whole e-mail, finger-scroll to the end of the message, then tap Get the rest of this message. 4. Wait for the remainder of the message body to download. Notes • For information about changing e-mail sync options such as setting the download size for e-mail, see "Customise e-mail settings" in Chapter 6.
Working With Company E-mails and Meeting Appointments 139 Flag your messages Flags serve as a reminder for you to follow-up on important issues or requests contained in e-mail messages. Flagging messages, which has been a useful feature on desktop Outlook E-mail, can also be done in Outlook Mobile on your device. You can flag received e-mail messages on your device. Requirement Flags are enabled only if e-mails are synchronised with Microsoft Exchange Server 2007 or higher.
Working With Company E-mails and Meeting Appointments Out-of-office auto-reply Outlook Mobile allows you to retrieve and change your out-of-office status. Just like desktop Outlook E-mail, Outlook Mobile automatically sends an autoreply message when you’re not available. To send out-of-office auto-reply messages 1. Tap Start > Messaging > Outlook E-mail. 2. Tap Menu > Tools > Out of Office. 3. In the I am currently list, select Out of the Office. 4. Enter your auto-reply message, then tap Done. 7.
Working With Company E-mails and Meeting Appointments 141 • If the time of the meeting conflicts with your other appointments, a “Scheduling Conflict” status appears on top of the e-mail. 3. Choose whether or not to edit your response e-mail before sending, then tap OK. If you accepted the meeting request, it will automatically be added as an appointment in Calendar on your device. To view the list of meeting participants 1. Tap Start > Calendar. 2.
Working With Company E-mails and Meeting Appointments • To view an attendee’s contact information, tap the attendee’s name. If the attendee is included in your contacts list, you will see the contact information immediately. If the attendee is not in your contacts list, tap Company Directory to view the contact information. 7.4 Finding Contacts in the Company Directory In addition to having contacts on your device, you can access contact information from your organisation’s Company Directory.
Working With Company E-mails and Meeting Appointments 143 • When creating a meeting request and selecting required and optional attendees in Calendar, tap Company Directory. 3. Enter a partial or full contact name and tap Search. In the search results list, tap a contact to select it. Notes • You can save a contact from the Company Directory to your device by selecting the contact, then tapping Menu > Save to Contacts.
Working With Company E-mails and Meeting Appointments
Chapter 8 Internet 8.1 Ways of Connecting to the Internet 8.2 Starting a Data Connection 8.3 Using Opera Mobile™ 8.4 Using YouTube™ 8.5 Using Streaming Media 8.6 Using Windows Live™ 8.7 Using Your Device as a Modem (Internet Sharing) 8.
Internet 8.1 Ways of Connecting to the Internet Your device’s networking capabilities allow you to access the Internet or your corporate network at work through one of the following connections: • Wi-Fi • 3G, GPRS, or EDGE • Dial-up Note You can also add and set up the following connections: • VPN: A VPN connection is used to access your corporate network by using an existing Internet connection.
Internet 147 To connect to a wireless network After Wi-Fi is turned on, your device scans for available wireless networks in your area. 1. The network names of the detected wireless networks are displayed on a pop-up message window. Tap the desired wireless network, then tap OK. Note When you select an open (unsecured) network, you will be automatically connected to the network after tapping OK. You do not need to do steps 2 and 3. 2.
Internet To check wireless network status You can check the current wireless connection status from any of the following screens of your device: • Title bar. When you enable Wi-Fi on your device, the Wi-Fi ON icon title bar. appears on the After Wi-Fi is turned on, your device scans for available wireless networks and the wireless signal icon appears on the title bar. The arrows in this icon move back and forth while your device is scanning for a wireless network signal.
Internet 149 • Configure Wireless Networks screen. On the Home screen, slide to the Settings tab and then tap All Settings. In the Connections tab, tap Wi-Fi > Wireless Networks. This screen displays the wireless networks currently available. To connect to a wireless network in the list, tap and hold on the desired network, then tap Connect. Tap a wireless network in the list to view or change its connection settings. You can also add new wireless networks, if available, by tapping Add New.
Internet GPRS/3G Use GPRS/3G (or EDGE, if available) to connect to the Internet and to send and receive e-mail and picture messages on your device. Check you have an O2 “data” or “web” included tariff to ensure you keep charges to a minimum. GPRS/3G settings are already preconfigured on your device, and your device is ready to use O2’s GPRS/3G services. Do not change the connection settings as this may cause services to stop working.
Internet 151 5. In the Select a modem list, select Cellular Line (GPRS , 3G), then tap Next. 6. Enter the Access point name, then tap Next. 7. Enter the user name and password, if required, then tap Finish. Notes • To view help information for any screen, tap the help icon ( ). • To modify your connection settings, tap Manage existing connections and then tap Edit.
Internet 6. Enter your user name, password, and any other information required by your ISP, then tap Finish. 8.2 Starting a Data Connection After setting up a data connection such as GPRS/3G or ISP dial-up on your device, you can now connect your device to the Internet. The connection is started automatically when you begin using a program that accesses the Internet such as Opera Mobile. To manually connect or disconnect a data connection 1.
Internet 153 8.3 Using Opera Mobile™ Opera Mobile™ is a full-featured Internet browser, optimised for use on your device. Note You can also use Internet Explorer® Mobile to browse the web. To open Internet Explorer Mobile, tap Start > Internet Explorer. 1 8 2 3 4 5 6 7 9 1 Refresh. Tap to reload the web page being viewed. 2 Address bar. Enter the URL of the web site here. 3 Back. Tap to go back to the previous web page viewed. 4 Bookmarks.
Internet 7 Menu. Tap to open a list where you can change Opera Mobile settings, check downloads, view History, and more. 8 Close tab. Tap to close the current tab. This is only enabled if you have more than one tab opened. 9 Exit Full Screen mode. When browsing the web, Opera Mobile automatically switches to Full screen mode. Tap to show the address and Menu bars again.
Internet 155 View web pages While browsing web pages, use finger gestures to pan and zoom on the web page. Tip Touch and hold an empty area on a web page to open a shortcut menu that lets you go back to the previous page, reload the page, add the page as a Bookmark, and more. You can also tap and hold a link or image on a web page to open a menu with different options.
Internet Opera Mobile menu On the menu bar, tap to open the menu. Tap to open the Settings screen where you can set the default home page, change display settings, set privacy settings, and more. Tap to view items being downloaded. You can also resume or stop current downloads. Tap to view information about the Web page you are browsing. Tap to see web pages that you have viewed. Tap to manage and view web pages that you have saved. Tap to open the Opera Mobile help file.
Internet 157 8.4 Using YouTube™ YouTube™ lets you browse, search, and watch video clips from the YouTube server. Note You need an active connection to use YouTube. If you are using a GPRS/3G connection, your data connection bill may increase significantly due to large file sizes of the videos. To open YouTube Tap Start > Programs > YouTube. Tap to open the Program Displays the current program Guide list. The Program channel being viewed.
Internet To add a new program channel into the Program Guide list 1. On the YouTube screen, tap . 2. On the Search screen, enter the channel you want to add to the Program Guide list. 3. Tap Search. YouTube searches for the channel and then displays the available videos from it. 4. Tap and then on the confirmation screen, tap OK. The channel you just subscribed to will now be shown when you tap Program Guide. Tip You can also add a YouTube user as a program channel.
Internet 159 Watching videos On the Videos, Bookmarks, or History screen, tap a video to launch the YouTube Video Player and use the on-screen buttons to control the playback. Note The YouTube Video Player always displays video in landscape orientation. Drag to go forward or backward in the video. Download progress Buffered video Tap to go back to the beginning of the video. Tap to toggle between playing and pausing the video. Tap to stop the video playback.
Internet When you tap Stop ( ) or finish watching the entire video, you are presented with options on what you can do next. Tap to go to the next page of related videos. If no action is taken, it automatically goes to the next page after 10 seconds. Tap to view details about the video you just watched. Tap to go back to the previous page of related videos. Tap to send the link to the video you just watched to another person using one of the Messaging accounts. Tap to add the video to your Bookmarks.
Internet 161 To delete a video from Bookmarks 1. On the Bookmarks screen, tap Edit. 2. Tap on the video you want to remove from Bookmarks. 3. On the confirmation screen, tap Yes. 4. Tap Done. History View recently watched videos on the History screen. To view History On the YouTube screen, tap Note . Tap a video to watch it. To clear the History list, tap Clear.
Internet 8.5 Using Streaming Media Streaming Media lets you stream live broadcasts or on-demand media content from the web. The media is sent in a continuous stream to your device and is played as it arrives, along with the audio. The Streaming Media program allows you to play 3GP and MPEG-4 files. It also supports playback of SDP (Session Description Protocol) files.
Internet 163 To stream media files directly on the Streaming Media Player Streaming Media only supports RTSP links when you stream *.3gp and *.mp4 files directly on the program. Note Before you launch the Streaming Media program, make sure that you are connected to the Internet. 1. Tap Start > Programs > Streaming Media. 2. From the program, tap Connect. 3. Enter the URL for the web site (rtsp://) and the file name. 4. Tap Connect. 5. Streaming Media then starts playing the file.
Internet 8.6 Using Windows Live™ Windows Live™ gives you a full Internet experience on your device. Windows Live™ helps you to find information, pursue your interests, and get in touch with friends and family on the Internet easier. Windows Live™ offers the following key features: • Live Search Bar, which lets you search for information on the web. • Live Messenger, the next generation of MSN Messenger Mobile. • Live Mail, the next generation of Hotmail.
Internet 165 If you select Store Windows Live contacts in your mobile phone’s contact list, your Windows Live™ contacts will be added to the contact list and to Windows Live™ Messenger on your device. If you select Sync e-mail, your Windows Live™ Mail or Hotmail inbox messages will be downloaded to your device. 6. Tap Next. 7. After synchronisation is complete, tap Done.
Internet Windows Live™ Messenger With this mobile version of Windows Live™ Messenger, you enjoy many of the same cool features that you get from the desktop version, which include the following: • • • • • • • • Note Instant messaging via text and voice Multiple conversations Insert emoticons Contact list with presence Send and receive files including photos Change status/display name View contacts by online status, groups, and more Send messages even when a contact is offline Before you can use Win
Internet 167 To sign in and out 1. Tap Sign in on the Messenger screen. 2. If this is your first time to sign in, a message appears to inform you that your messenger contacts will be added to the contact list on your device. Tap OK to add them. Signing in may take several minutes, depending on your connection speed. 3. To sign out, tap Menu > Sign Out. To start and end conversations 1. In the contact list, select a contact, then tap Send IM to open a message screen. 2.
Internet Add Windows Live™ contacts You can add new Windows Live™ contacts in Windows Live™ Messenger or in Contacts. To add a Windows Live™ contact in Live Messenger 1. Tap Menu > Add new contact. 2. Enter the e-mail address of the contact, then tap OK. To add a Windows Live™ contact in Contacts 1. On the Home screen, slide to the People tab and then tap All People. 2. Tap New, then tap Windows Live. 3.
Internet 169 8.7 Using Your Device as a Modem (Internet Sharing) Internet Sharing connects your desktop or notebook computer to the Internet by using your device’s data connection (GPRS or EDGE, for instance). You can choose to connect via USB or Bluetooth. Notes • Make sure your device has a SIM card installed, and your device has a GPRS/3G or phone dial-up modem connection. If your device has not been set up with a data connection yet, tap Menu > Connection Settings on the Internet Sharing screen.
Internet To use your device as a Bluetooth modem For the computer to use the Internet connection of your device, activate Internet Sharing on your device, then set up a Bluetooth Personal Area Network (PAN) between the computer and your device. 1. On your device, turn on Bluetooth and set it to visible mode by following the steps in “To turn Bluetooth on and make your device visible” section in Chapter 9. 2.
Internet 171 c. Under Network Tasks, click View Bluetooth network devices. d. In the Bluetooth Personal Area Network Devices dialog box, select your device, then click Connect. Note If the Bluetooth adapter or dongle on your computer was installed using a thirdparty provided driver, open the Bluetooth software that came with the Bluetooth adapter/dongle to connect your computer and device via Bluetooth. Refer to the Bluetooth adapter/dongle documentation for more information. 8.
Internet 8.8 Using RSS Hub RSS Hub is an RSS reader that keeps you up-to-date with the latest news from the Internet. It monitors Internet news channels and downloads the most current news updates and podcasts so you are instantly informed of breaking news and events. For more information and tips on using RSS Hub, see Help on your device. Note Make sure you have an active Internet connection (such as EDGE or GPRS) before using RSS Hub.
Internet 173 Note If the RSS channel you want to subscribe to is not in the list of known channels, tap Back, then select another option on the New Channel Wizard screen. For more information on these other options, see the Help on your device. 3. Select the check boxes of the RSS channels you want to subscribe to, then tap Finish. Tip Channels are grouped by categories. If you want to select all channels in a category, select the category check box. 4. The channel list appears.
Internet To add new channels 1. In the channel list, tap Menu > Channel > New to open the New Channel Wizard screen. 2. Select an option, then follow screen instructions to add new channels. For more information on New Channel Wizard options, see Help on your device. To filter the channels in the display In the channel list, tap Menu > View, then select: • Updated to display only those channels with unread headlines. • All to display all subscribed channels.
Internet 175 View and organise headlines Tap a channel in the channel list to display the headlines for that channel. Headline or news summary contains a keyword Headline has been read New or unread headline Tap to return to the channel list Tap a headline to open the news summary screen Audio/Video/Image file attachment is downloading Tap to download audio/ video file attachment New or unread headlines display in bold and are marked with a blue newspaper icon.
Internet View the news summary Tap a headline in the headline list to display the news summary. Channel name Headline and read status Audio/Video/Image file attachment. Tap to download the file. News summary Tap to open the news item in Opera Mobile. See “Using Opera Mobile” in this chapter for details.
Internet 177 To download, play, or save podcasts 1. When you see an audio or video file attachment in the news summary, do one of the following to download the file: • Tap Menu > Podcasts > Start Download. • Tap the Download audio/Download video link below the audio/video file icon. Tip To cancel the file download, tap Menu > Podcasts > Cancel Download, or tap Cancel download below the audio/video file icon. 2.
Internet To view the next or previous news summary In the news summary screen, tap Menu > Next or Menu > Previous, or press NAVIGATION left or right. For more information about the features and configuring RSS Hub, refer to the online help. To open the online help, tap Start > Help while in RSS Hub.
Chapter 9 Bluetooth 9.1 Bluetooth Modes 9.2 Bluetooth Partnerships 9.3 Connecting a Bluetooth Hands-free or Stereo Headset 9.4 Set Up the Default Bluetooth Device to Connect to 9.5 Beaming Information Using Bluetooth 9.6 Bluetooth Explorer and Bluetooth File Sharing 9.
Bluetooth 9.1 Bluetooth Modes Bluetooth is a short-range wireless communications technology. Devices with Bluetooth capabilities can exchange information over a distance of about eight meters (26 feet) without requiring a physical connection. Bluetooth on your device operates in three different modes: • On. Bluetooth is turned on. Your device can detect other Bluetooth-enabled devices, but not vice versa. • Visible.
Bluetooth 181 9.2 Bluetooth Partnerships A Bluetooth partnership is a relationship that you create between your device and another Bluetooth-enabled device in order to exchange information in a secure manner. To create a Bluetooth partnership 1. On the Home screen, slide to the Settings tab and then tap Menu > Bluetooth Devices > Devices tab. 2. Tap Add new device. Your device displays the names of other Bluetooth devices within range. 3. Tap the device name in the box, then tap Next. 4.
Bluetooth To accept a Bluetooth partnership 1. Ensure that Bluetooth is turned on and in visible mode. 2. Tap Yes when prompted to establish a partnership with the other device. 3. Enter a passcode (the same passcode that is entered on the device requesting the partnership) to establish a secure connection. The passcode must be between 1 and 16 characters. 4. Tap Next. 5. Tap Done. You can now exchange information with the paired device.
Bluetooth 183 3. Tap the name of the Bluetooth headset, and then tap Next. The device will automatically pair the device with the Bluetooth headset. Windows Mobile will automatically try one of the preconfigured passcodes (0000, 1111, 8888, 1234) to pair the Bluetooth headset with the device. If this fails, you have to enter the passcode delivered with your headset manually. Note If the Bluetooth headset becomes disconnected, turn the headset on and repeat steps 1 to 2 above.
Bluetooth 9.5 Beaming Information Using Bluetooth You can beam information, such as contacts, calendar items, tasks, and files from your device to your computer or to another Bluetooth-enabled device. Note If your computer does not have built-in Bluetooth capability, you need to connect and use a Bluetooth adapter or dongle on your computer. To beam information from your device to a computer 1. Turn on Bluetooth on your device, and make your device visible.
Bluetooth 185 d. In the Options tab of Bluetooth Devices, select Show the Bluetooth icon in the notification area. e. To enable your computer to receive Bluetooth beams, right-click the Bluetooth icon in the notification area at the bottom-right corner of your computer screen and select Receive a File. You are now ready to beam. 3. On your device, select an item to beam. The item can be an appointment in your calendar, a task, a contact card, or a file. 4. To beam a contact, tap Menu > Send Contact > Beam.
Bluetooth To enable Bluetooth Explorer and Bluetooth file sharing on your device 1. On the Home screen, slide to the Settings tab and then tap Menu > Bluetooth Devices > FTP tab. 2. Select the Enable Bluetooth Explorer check box. This makes the Bluetooth device folder visible in File Explorer. 3. Select the Enable File Sharing check box. You can use the default Bluetooth shared folder, or tap Browse to use another folder as your shared folder. 4. Tap OK. To use Bluetooth Explorer 1.
Bluetooth 187 9.7 Printing Files via Bluetooth Connect your device to a Bluetooth printer to print contact information, appointment details, images, and other file types. Note You can print files in the .txt, .jpg, .xhtml, .vcf, .vcs file formats. Before you start printing, make sure to turn on the Bluetooth printer and to turn on Bluetooth on your device. To turn on Bluetooth, tap Start > Programs > Comm Manager, then tap the Bluetooth button. To print contact information 1.
Bluetooth To print a text file 1. In File Explorer, locate the text file you want to print. 2. Tap and hold the txt file and then on the menu, tap Print via Bluetooth. 3.
Chapter 10 Finding and Recording Places 10.1 Guidelines and Preparation for Using GPS 10.2 Downloading Satellite Data via QuickGPS 10.3 HTC Footprints™ 10.4 Google™ Maps (Available by Country) 10.5 Location Settings 10.
Finding and Recording Places 10.1 Guidelines and Preparation for Using GPS Please follow these guidelines when using GPS on your device: • When using GPS navigation software in the car, always plot your GPS route before starting to drive. Do not try to configure the GPS navigation software while driving. • The plotted GPS route is only for driving reference. It should not interfere with actual driving behaviour.
Finding and Recording Places 191 • Please use the GPS system cautiously. Users shall be liable for any damages resulting from negligent operation of the system. • The GPS signal cannot pass through solid non-transparent objects. Signal reception may be affected by obstructions such as high-rise buildings, tunnels, bridges, forests, weather (rainy or cloudy days), etc. If the vehicle’s visor contains metal, it will be difficult for the GPS signal to pass through.
Finding and Recording Places To download data Tap Download on the QuickGPS screen. On the screen, initially, you will see the Valid time of the downloaded data. As time passes, the remaining days and hours of validity will be shown. To speed up GPS positioning, download the latest ephemeris data when the validity of the data expires. You can improve GPS performance even more by downloading data more frequently.
Finding and Recording Places 193 10.3 HTC Footprints™ HTC Footprints™ provides an easy way to record favorite places and revisit those places. A footprint consists of a photo you take of a location such as a restaurant, a sightseeing destination, or other memorable place, stored together with a precise GPS position and other information about that location such as the street address and phone number. The next time you want to visit the same place, simply access the footprint.
Finding and Recording Places GPS signal strength indicator. The stronger the signal, the quicker your position will be found. Icons appear here as follows: Strong GPS reception. Weak GPS reception. Tip Position found. If you change location after your position is found, Footprints searches again. To change brightness and white balance settings before you take a photo, tap Menu > Brightness or White Balance, and choose a setting. 3. Press the ENTER button to capture the photo.
Finding and Recording Places 195 Note The photo is automatically named according to the district or area. To change the name, see “Edit a footprint” in this chapter. The date cannot be changed. Tip To retry the GPS positioning search if your location was not found, or update your current location, touch . 4. To find your position on Google Maps, touch . Tap and hold on the map position you want, and then tap the pop-up text or the red cross to confirm this position.
Finding and Recording Places Find a previously visited place Footprints are organized in categories so that you can find the place you want quickly. Once found, you can visit the place again easily by ringing the specified phone number, navigating to the location using the GPS navigation software, and more. 1. Do one of the following: • Tap Start > Programs > Footprints. • On the Home screen, slide to the Footprints tab, and tap Footprints. 2. Select a category.
Finding and Recording Places 197 Edit a footprint You can add more location information to your footprints, such as a phone number, an address, and a note. This can be very useful for example when you want to take a quick “snapshot” of a place together with its GPS position, and add more detailed information later. 1. Tap Start > Programs > Footprints. Tip On the Home screen’s Footprints tab, you can also tap Footprints on the lower‑left side of the screen. 2.
Finding and Recording Places Export and import footprints You can back up all your footprints by exporting them to a storage card, if installed. When you import the backup from the card, any new footprints you have added on the device are kept. To export all your footprints to a storage card On the Categories screen, tap Menu > Export. If there is already a Footprints backup on the storage card, you are asked whether you want to overwrite it.
Finding and Recording Places 199 The Google Maps screen Tap to zoom in on the map. Your current location. Tap to zoom out on the map. Tap to search for places of interest and addresses. Notes Tap to open a menu where you can set Google Maps to find and display your current location, get directions, see traffic information, look up a contact address, and more. • Currently, traffic information is only available for the U.S.
Finding and Recording Places Search for a place of interest You can easily search and locate a place of interest such as hotels, restaurants, and other places using Google Maps. Google Maps can also show details on how to contact and reach the place of interest from your current location. Note You can also enter keywords, street addresses, or postal codes when searching places using Google Maps. 1. On the Google Maps screen, tap Search. 2.
Finding and Recording Places 201 4. On the Address tab, you can: • Tap the web address to go to the web site of the place of interest. Note This information only appears when the web site of the place of interest is available. • Tap the [phone number] to call the place of interest that you have selected. • Tap Directions to here or Directions from here to get directions on how to get to the place of interest from your current location or vice versa.
Finding and Recording Places 10.5 Location Settings You can change what location data is sent and received on your device. Do one of the following: • On the Home screen, slide to the Settings tab, and tap Location. • Tap Start > Settings > System tab > Location Settings. Assisted GPS Assisted GPS (A-GPS) reduces the time needed to determine your location with GPS. It does this by communicating with a network server using your data connection. Availability and costs depend on your service provider.
Finding and Recording Places 203 10.6 NaviPanel NaviPanel offers you a convenient, one-touch interface to Footprints, the phone, and the GPS navigation software when you are using your device with the supplied in-car holder. When you put your device in the holder, NaviPanel automatically launches, and your device prompts you to connect to a Bluetooth car kit or headset if either one is set as the default (see “Set Up the Default Bluetooth Device to Connect to” in Chapter 9).
Finding and Recording Places NaviPanel settings You can change what happens when you put the device in the in-car holder (Car Kit Mode). To open the Car Kit Mode screen and change settings 1. In NaviPanel, tap Menu > Options. Tip You can also tap Start > Settings > System tab > Car Kit Mode to open the Car Kit Mode screen. 2. Choose from the following options: • Auto launch NaviPanel in car kit mode.
Chapter 11 Experiencing Multimedia 11.1 Taking Photos and Videos 11.2 Viewing Photos and Videos Using Album 11.3 Using Windows Media® Player Mobile 11.4 Using Audio Manager 11.
Experiencing Multimedia 11.1 Taking Photos and Videos Use Camera to take photos and record video clips. To open the Camera screen 1. On the Home screen, slide to the Photos and Videos tab. 2. Tap the Camera icon ( ) or the Video Camera icon ( ). The screen orientation automatically switches to landscape mode when you open Camera. Tip You can also tap Start > Programs > Camera to open the Camera program.
Experiencing Multimedia 207 Current capture mode You can select from the following capture modes: Icon Capture Mode Photo Captures standard still images. Video Captures video clips, with or without accompanying audio. Panorama Captures a sequence of still images continuously in one direction, and stitches the images together to create a panoramic view of a scene. MMS Video Captures video clips suitable for sending with MMS messages.
Experiencing Multimedia Picture Theme Captures still images and places them within frames. GPS Photo Captures still images and uses GPS to tag them with your geographical location. When you tap this, the device searches for your GPS position. If this is not found, the device returns to Photo mode. (For information about ensuring GPS reception, see “Guidelines and Preparation for Using GPS” in Chapter 10.
Experiencing Multimedia 209 On-screen controls and indicators Tap the screen to display the controls and indicators. Photo, Video, MMS Video, Contacts Picture, and GPS Photo modes 6 5 7 When capturing in Video and MMS Video modes 8 1 2 3 1 Zoom control. Tap Tip 4 to zoom in, or to zoom out. You can also rotate the NAVIGATION WHEEL or press NAVIGATION up/down (Landscape orientation) to zoom in or out. 2 Album. Tap to open Album. See “Viewing Photos and Videos Using Album” for details.
Experiencing Multimedia 6 Remaining information indicator. In Photo, Contacts Picture, Picture Theme, and Panorama modes, this shows the remaining/available shots of pictures based on the current settings. In Video and MMS Video modes, this shows the remaining duration that can be recorded. While recording video, this shows the recorded duration. 7 GPS icon. In GPS Photo mode, when your location has been found, displayed. When your location has not been found, is displayed. 8 Recording indicator.
Experiencing Multimedia 211 Menu Panel The Menu Panel provides a quick way of adjusting the most common camera settings and lets you access more advanced camera settings. On the Camera screen, tap to open the Menu Panel. To adjust a setting, keep tapping a button on the panel, for instance, White Balance, to cycle through the available settings. To access advanced options, tap . Note The available settings on the panel depend on the selected capture mode. 6 1 5 2 4 3 1 Resolution.
Experiencing Multimedia 5 Brightness. Tap to open the Brightness bar at the bottom of the screen. On the Brightness bar, tap to decrease, or to increase the brightness level. Tap outside the Brightness bar to apply the change. 6 White Balance. White balance enables the camera to capture colours more accurately by adjusting to different lighting conditions. White balance settings include: Auto ( ), Daylight ( ), Night ( ), Incandescent ( ), and Fluorescent ( ).
Experiencing Multimedia 213 Capture mode Photo, GPS Photo Video Panorama MMS Video Contacts Picture Picture Theme Resolution Zoom range 3M (2048 x 1536) 1.0x to 2.0x 2M (1600 x 1200) 1.0x to 2.0x 1M (1280 x 960) 1.0x to 2.0x Large (640 x 480) 1.0x to 2.0x Medium (320 x 240) 1.0x to 4.
Experiencing Multimedia The Review screen After capturing, the Review screen lets you view, send, or delete the photo or video clip by tapping an icon at the bottom of the screen. Review screen icons Icon Function Back Return to the live Camera screen. Delete Delete the captured image or video. View View the captured image in the Album program. Play Play back the captured video or MMS video in the Album program.
Experiencing Multimedia 215 Advanced Options The Advanced Options let you adjust options for your selected capture mode and set Camera program preferences. Access the Advanced Options by tapping Advanced on the Menu Panel. You can either tap on-screen or press NAVIGATION up/down (Landscape orientation) to navigate through the Advanced Options screen. Tap an item to change the setting. Tap to go through the different Advanced Camera Settings screens. Tap to go back to the Camera screen.
Experiencing Multimedia • Time Stamp (Photo and GPS Photo mode). Choose whether to include the shooting date and time on captured photos. • Storage. Select where you want to save your files. You can either save the files to the main memory or to a storage card if one is installed. • Keep Backlight. Turn the backlight on or off. This overrides your device backlight settings while you are using the camera. • Shutter Sound.
Experiencing Multimedia 217 • Prefix. When Default is selected as the prefix, the file name of each new captured file is set to “IMAGE” or “VIDEO” followed by a sequential number, for example: IMAGE_001.jpg. You may also choose to name files using either the current Date or Date & Time as the prefix. Note If you set the Camera to save captured photos to a storage card, the prefix cannot be selected. Captured photos will be named using the convention IMAGnnnn.
Experiencing Multimedia with the captured video clips, or select Off to capture video without audio.• • Recording Limit (Video mode). Set the maximum duration or file size for recording video. • Template (Picture Theme mode). Select a template. • Template Folder (Picture Theme mode). By default, templates are stored in the \My Documents\Templates folder on the device’s Main Memory.
Experiencing Multimedia 219 Launch Album Do one of the following: • On the Home screen, slide to the Photos and Videos tab and tap Album. • In the Camera program, tap • Tap Start > Programs > Album. Note . Album is always displayed in landscape mode. Tap to open the Camera program. Select a photo or video to view 1. On the main Album screen, tap Albums and then select the album to view. The contents of the album are then displayed on the main Album screen. 2.
Experiencing Multimedia View an image While viewing an image in full screen, tap the screen or press ENTER to open the on-screen menu. Tap to send the image using one of the Messaging accounts. Tap to start the slideshow. Tap to go back to the main Album screen, Photos and Videos tab, or Camera. Tip Tap to open a menu where you can save the screen image as a photo for a contact, save the current image as a new file, delete the image, and view file properties.
Experiencing Multimedia 221 To view the next or previous image When viewing images in full screen, go to the next image by swiping your finger across the screen from right to left. Go back to the previous image by swiping your finger from left to right. To zoom in or out of an image While viewing an image, make a full-circle gesture on the screen with your finger. Slide your finger clockwise on an area to zoom in on that area. Slide your finger anticlockwise to zoom out.
Experiencing Multimedia Tips • You can also zoom in and out by rotating the NAVIGATION WHEEL. • When you zoom in on an image, double-tap the screen to automatically zoom out and fit the image to the screen. • When you zoom in on an image, tap and hold the screen so you can pan the image. • When you zoom in on an image, tap the screen to open the on-screen menu. On the on-screen menu, tap and then select Save Screen Image to save the image on-screen as a new file.
Experiencing Multimedia 223 Play back video While playing back video, tap the screen to show the playback controls. Drag to go forward or backward in the video. Elapsed time Total duration Tap to go back to the beginning of the video. Tap to stop video playback. Tap to play or pause video playback. Tip If the video is in your favourite album, you can start the video playback from the Photos and Videos tab on the Home screen. On the Photos and Video tab, tap Play.
Experiencing Multimedia 11.3 Using Windows Media® Player Mobile Windows Media® Player Mobile plays digital audio and video files that are stored on your device or on a network, such as on a web site. Video File Formats Supported Windows Media Video MPEG4 Simple Profile H.263 H.264 Motion JPEG File Extensions .wmv, .asf .mp4 .3gp, .3g2 .mp4, .3gp, .3g2, .m4v .
Experiencing Multimedia 225 About the controls Tap and drag to jump to any part of the video or audio Mute/Unmute Full screen Increase volume Visit WindowsMedia.com Decrease volume Skip to the beginning of Skip to the next file the current file or to the Play/Pause previous file About the screens and menus Windows Media® Player Mobile has three primary screens: • Playback screen. The screen that displays the playback controls (such as Play, Pause, Next, Previous, and Volume) and the video window.
Experiencing Multimedia At the bottom of each screen, you can open a Menu. The commands on this menu vary, depending on which screen you are viewing. For more information about the commands in these menus, see Help on your device. Synchronise video and audio files Use the latest version of Windows Media® Player on your computer to synchronise digital media files from your computer to your device. This ensures that protected files and album art (for skins) are copied to your device correctly.
Experiencing Multimedia 227 The files will begin synchronising to your device. The next time you connect your device to your computer while Windows Media® Player is running, synchronisation will start automatically. To synchronise content manually to your device 1. If you have not set up media synchronisation between your device and computer, follow steps 1 to 3 in “To synchronise content to your device automatically”. 2. Click the Sync tab on the Windows Media® Player of your computer.
Experiencing Multimedia Notes • Use Windows Media® Player 11 or higher on your computer to synchronise media files to your device. • Audio files copy faster if Windows Media® Player is configured to automatically set the quality level for audio files copied to your device. For more information, see the Windows Media® Player Help. Play media Use the Library to find and play songs, videos, and playlists that are stored on your device or an installed storage card. To update the Library 1.
Experiencing Multimedia 229 Playlists In Windows Media® Player Mobile, you can create a new playlist by saving the current Now Playing playlist and giving it a new name. To save a new playlist 1. If you are not on the Library screen, tap Menu > Library. 2. Tap to select a category (for example, My Music or My Playlists). 3. Select a media file that you want, then tap Menu > Queue Up. This adds the file to the Now Playing list.
Experiencing Multimedia 11.4 Using Audio Manager In Audio Manager, you can access all the music files on your device. You can browse categories such as Artists, Genre, and more, and play them on the Music tab of the Home screen (see Chapter 3 for more information on playing music). You can create your own playlists. You can also set whole songs or parts of songs as ringtones.
Experiencing Multimedia 231 Audio Manager: Main screen Audio Manager: Artists screen Music files that are protected by Digital Rights Management (DRM) are listed under the Protected category. A lock icon shown before song titles indicates that the music files are protected. Select a file and tap Info if you want to view file information. A cross-marked lock icon shown before song titles indicates that the rights for the music files have expired, and you are not able to play them.
Experiencing Multimedia To create a playlist 1. On the Main screen, tap Playlists. 2. On the Playlists screen, tap Menu > New. 3. Enter a Playlist name and tap OK. 4. On the Playlists screen, tap the playlist you have just created and tap Menu > Edit. 5. Tap Menu > Add. 6. Tap the check boxes to select the songs you want to add to the playlist, or tap Menu > Select All to choose all the songs. 7. Tap OK three times to return to the Playlists screen. To play back a playlist 1.
Experiencing Multimedia 233 Mark the part of the music that will be used as the ring tone. Drag the left handle to mark the start time, then drag the right handle to mark the end time. Play/Stop For more precise marking, you can also tap these controls to step backward/forward one step and mark it. Confirm trimming the ring tone. Cancel trimming. 3. Tap Set as Default Ring Tone. Tip If you only want to save the song to the ring tone folder for future use, tap Save to Ring Tone Folder.
Experiencing Multimedia 11.5 Using Audio Booster Audio Booster optimises sound for a better listening experience. It provides preset moods, such as hip hop, jazz, rock, etc., and several enhancement presets that suit different types of music. To access Audio Booster Tap Start > Programs > Audio Booster. 1 2 This control Does this 1 On Select the check box to enable or disable the equalizer. 2 Equalizer presets Tap to choose the Equalizer preset to use.
Experiencing Multimedia 235 To create a custom equalizer preset 1. Adjust the frequency bands to your desired values by dragging the equalizer controls. The selected values are indicated on top of the sliders. 2. Save your equalizer settings as a preset by tapping Menu > Save as Preset. 3. Enter a preset name and then tap Done. The preset you created is added to the list box. To delete a custom equalizer preset 1. Tap the list box and select the Equalizer preset you want to delete. 2.
Experiencing Multimedia
Chapter 12 Programs 12.1 Accessing Programs on Your Device 12.2 Adding and Removing Programs 12.3 Adobe® Reader® LE 12.4 Calendar 12.5 Contacts 12.6 Comm Manager 12.7 Microsoft® Office Mobile 12.8 Notes 12.9 Java 12.10 SIM Manager 12.11 Tasks 12.12 Voice Recorder 12.13 Voice Speed Dial 12.
Programs 12.1 Accessing Programs on Your Device You will find preinstalled programs in the Start menu and on the Programs screen of your device. To launch and use a program Do one of the following: • Tap Start to open the Start menu and then tap a desired program. • To access more programs, tap Start > Programs, or slide to the Programs tab on the Home screen and then tap All Programs. 12.
Programs 239 To uninstall a program 1. Tap Start > Settings > System tab > Remove Programs. 2. In the Programs in storage memory list, select the program you want to remove, then tap Remove. 12.3 Adobe® Reader® LE Adobe® Reader® LE is an application for viewing PDF (Portable Document Format) documents on your device. It supports a subset of the features found in the PC versions of Adobe Reader. To open Adobe Reader LE Tap Start > Programs > Adobe Reader LE.
Programs 12.4 Calendar Use Calendar to create appointments, including meetings and other events. You can also synchronise Calendar appointments between your device and computer. To open the Calendar screen • On the TouchFLO Home screen, tap Calendar or a displayed appointment; or • Tap Start > Calendar. Create appointments To schedule an appointment 1. Open the Calendar screen and then tap Menu > New Appointment. 2. Enter a name for the appointment. 3.
Programs 241 To set the reminder time for new appointments By default, Calendar has been set to display a reminder alert when you have new upcoming appointments. You can change the reminder time. 1. Open the Calendar screen. 2. Tap Menu > Tools > Options > Appointments tab. 3. Make sure the Set reminders for new items check box is selected. 4. Set the time when you want the reminder to alert you. 5. Tap OK to return to the Calendar screen.
Programs • To change the default view that Calendar uses to display appointments, tap Menu > Tools > Options > General tab. Tap the Start in box, then choose the calendar view. • When in Month view, you will see the following indicators: Morning appointment Afternoon or evening appointment Both morning and afternoon/evening appointments All-day event Send appointments To send a meeting request Use Calendar to schedule meetings via e-mail with contacts who use Outlook or Outlook Mobile. 1.
Programs 243 Notes • If you’re sending the meeting request using your Outlook E-mail account, it will be sent to the attendees the next time you synchronise your device with your computer or Exchange Server. • When attendees accept your meeting request, the meeting is automatically added to their schedules. When their response is sent back to you, your calendar is updated as well.
Programs To open the Contacts screen Do one of the following: • On the TouchFLO Home screen, slide to the People tab and then tap All People; or • Tap Start > Contacts. Add new contacts To add a contact on your device 1. Open the Contacts screen. 2. Tap New, select Outlook Contact, and enter the contact information. 3. In the File as field, choose how you want the contact name to appear in the contact list. 4.
Programs 245 To add a contact to your SIM card 1. Open the Contacts screen. 2. Tap New, then select SIM Contact. 3. Enter a contact name and phone number. 4. Tap OK. Tip You can also use the SIM Manager to add and edit contacts on your SIM card. For more information, see "SIM Manager" in this chapter. Organise and search contacts To group similar contacts For easier management, you can group similar contacts by assigning them to categories. 1.
Programs To find a contact on your device There are several ways to find a contact when your contact list is long: • Begin entering a contact name in the provided text box until the contact you want is displayed. • On the Quick Scroll bar on the right of the Contacts screen, scroll to or tap a letter to go directly to the part of the contacts list where contact names start with that letter.
Programs 247 Share contact information To beam a contact’s details You can quickly send contact information to another mobile phone or device through Bluetooth beaming. 1. On the Contacts screen, select a contact. 2. Tap Menu > Send Contact > Beam, then select a device where to beam the contact to. Note Before beaming, make sure Bluetooth is turned on and set to visible mode on your device and the target mobile device. You can also beam contact information to your computer. See Chapter 9 for details.
Programs 12.6 Comm Manager Comm Manager is a central location where you can easily turn on and off the communication features of your device such as the phone, Wi-Fi, data connection, Bluetooth, and more. To access the Comm Manager Do one of the following: • On the TouchFLO Home screen, slide to the Settings tab and then touch Communications. • Touch Start > Programs > Comm Manager. • Touch Start > Settings > Connections tab > Comm Manager. 1 2 3 4 5 6 1 Switch Airplane Mode on or off.
Programs 249 4 Switch Wi-Fi on or off. Tap Settings > Wireless LAN to configure wireless network connection settings. See “Wi-Fi” in Chapter 8 for details. 5 Switch between automatically receiving (as items arrive) or manually retrieving Outlook e-mails. See Chapter 7 for details. 6 Turn your data connection (such as 3G or GPRS) on or off. See “Starting a Data Connection” in Chapter 8 for details. 12.
Programs Tips • By default, Word Mobile saves documents in .docx format, while Excel Mobile saves workbooks in .xlsx format. If you want to open these types of files on a computer that uses Microsoft Office 2000, Office XP, or Office 2003, you need to download and install the File Format Converter in your computer. You can find this converter at http://www.microsoft.com/downloads/details. aspx?FamilyId=941B3470-3AE9-4AEE-8F43-C6BB74CD1466&displaylang=en. • If you want Word Mobile to save documents in .
Programs 251 3. Tap OK to save. Note To select a drawing (for example, to copy or delete it), tap and hold the drawing briefly. When you lift the stylus, the drawing is selected. To record a voice note You can create a stand-alone recording (voice note) or you can add a recording to a note. 1. Tap Start > Programs > Notes. 2. If you do not see the Recording toolbar, tap Menu > View Recording Toolbar. 3. Do one of the following: • To add a recording to a note, create or open a note.
Programs 12.9 Java MIDlets are Java applications such as games and tools that can run on mobile devices, while a MIDlet suite is a collection of one or more MIDlets. The Java program lets you download, install and manage MIDlets or MIDlet suites on your device. Your device supports Java 2 Micro Edition, J2ME. To open the Java program Tap Start > Programs > Java. Install and launch MIDlets/MIDlet suites There are several ways to install a MIDlet/MIDlet suite.
Programs 253 To run a MIDlet/MIDlet suite Do one of the following: • After installation of the MIDlet/MIDlet suite is complete, tap Yes. • On the Java screen, open the folder that contains the MIDlet/MIDlet suite. Select the MIDlet/MIDlet suite, then tap Launch. Manage MIDlets/MIDlet suites You can organise MIDlets/MIDlet suites into folders for easy identification, renaming, updating, and more. If the device memory is full, uninstall some MIDlets/ MIDlet suites to free up memory space.
Programs 12.10 SIM Manager SIM Manager allows you to view the contents of your SIM card, transfer contacts from your SIM card to your device or vice versa, and make a call to a SIM contact. To create a contact on your SIM card 1. Tap Start > Programs > SIM Manager. 2. Tap New and enter a contact name and phone number. 3. Tap Save to save the information on your SIM card. Tip To change contact information on your SIM card, tap a SIM contact, edit the information, and then tap Save.
Programs 255 1. On the SIM Manager screen, tap Menu > Tools > Options. 2. Select the check boxes of the types of phone numbers that you want to be added to the SIM card. 3. Under the Mark column, you can change the indicator that will be appended to the SIM contact names for each phone number type. To do so, select a phone type, tap Edit, enter your desired indicator, then tap Save. 4. After modifying, tap OK. 5. Tap Menu > Contacts to SIM. 6.
Programs 12.11 Tasks Use Tasks to keep track of things you need to do. A task can occur once or repeatedly (recurring). Your tasks are displayed in a task list. Overdue tasks are displayed in red. A reminder will be displayed when you have new tasks to be completed. To create a task 1. Tap Start > Programs > Tasks. 2. Tap Menu > New Task, enter a subject for the task, and fill in information such as start and due dates, priority, and so on. 3.
Programs 257 To send task information as a vCalendar After selecting the task to send in the Task screen, tap Menu > Send as vCalendar to send a vCalendar containing task details as a file attachment in an MMS message. For more information, see “MMS” in Chapter 6. 12.12 Voice Recorder Voice Recorder lets you record your voice and quickly send it as an MMS or e-mail attachment, beam it via Bluetooth, or set the recorded voice as your ring tone.
Programs Tip If you need to adjust the sound volume, touch any of the status icons on the title bar and then touch the Volume icon ( ) to open the System Volume screen where you can adjust the volume. To send a voice recording through MMS Select a voice recording, then tap Menu > Send via MMS. A new MMS message is then created with the voice recording automatically inserted as an audio clip. See “MMS” in Chapter 6 to learn how to compose and send MMS messages.
Programs 259 12.13 Voice Speed Dial You can record voice tags so that you can dial a phone number or launch programs simply by speaking a word. To create a voice tag for a phone number 1. On the TouchFLO Home screen, slide to the People tab and then touch All People to open the Contacts screen. Tip You can also touch Start > Contacts to open the Contacts screen. 2. Do one of the following: • Scroll to the desired contact, then touch Menu > Add Voice Tag.
Programs Tip To ensure voice recognition accuracy, record your voice in a quiet place. 4. When completed, a Voice Tag icon is displayed on the right of the item. To create a voice tag for a program Touch Start > Settings > Personal tab > Voice Speed Dial > Application tab. The Application tab displays a list of all installed programs on your device. The procedure for creating a voice tag for a program is the same as the procedure for creating a voice tag for a phone number.
Programs 261 12.14 ZIP The ZIP program increases the storage capacity of your device by allowing you to compress files in the conventional ZIP format. It also allows you to extract files from a zip file. To start ZIP on your device Tap Start > Programs > ZIP. Each time you start ZIP, it searches for files that have the .zip file extension, and displays these files on the Archive List screen. To open a ZIP file and extract files 1.
Programs To create a new zip archive 1. Touch File > New Archive. 2. On the Save As screen, enter the zip file name and choose a folder where you want to save it. You can also choose whether to save the zip file on the device’s main memory or a storage card. 3. Touch Save. 4. Touch Menu > Action > Add. 5. Navigate to the folder that contains the files you want to archive. 6. Select files to add by doing one of the following: • Touch a file to select it.
Chapter 13 Managing Your Device 13.1 Copying and Managing Files 13.2 Settings On Your Device 13.3 Changing Basic Settings 13.4 Using Task Manager 13.5 Protecting Your Device 13.6 Managing Memory 13.7 Resetting Your Device 13.8 Windows Update 13.
Managing Your Device 13.1 Copying and Managing Files You can copy files between your device and computer, or copy files to a storage card installed on your device. You can also efficiently manage your files and folders using File Explorer. To copy files using Windows Mobile Device Center or ActiveSync 1. Connect your device to the computer. 2. Click File Management > Browse the contents of your device in Windows Mobile Device Center on your computer, or click Explore in ActiveSync on your computer.
Managing Your Device 265 the desired operation on the shortcut menu. To copy or delete multiple files, tap and drag over the desired files to select, tap and hold the selection, then choose the desired operation on the shortcut menu. To copy files to a storage card 1. Make sure that the storage card is properly installed on your device. 2. Tap Start > Programs > File Explorer and navigate to the appropriate folder. 3. Tap and hold the file you want to copy, then tap Copy. 4.
Managing Your Device Icon Description Menus Set which programs will appear in the Start menu. Owner Information Enter your personal information on your device. Phone Customise phone settings such as ring tone, set a PIN number for your SIM card, and more. Sounds & Notifications Enable sounds for events, notifications, and more, and set the type of notification for different events. Today Customise the appearance and the information to be displayed on the Today screen.
Managing Your Device 267 Icon Description Certificates See information about certificates that are installed on your device. Clear Storage Reset your device to factory default settings. Clock & Alarms Set the device clock to the date and time of your locale or to a visiting time zone when you’re travelling. Alarms can also be set at specified days and times of a week. Customer Feedback Set your device to automatically send information about how you use Windows Mobile.
Managing Your Device Icon Description Microphone AGC Adjust the volume of your voice automatically when you are recording. Power Check the remaining battery power. You can also set the brightness of the backlight and timeout for turning off the display (switching device to Sleep mode) to conserve battery power. Regional Settings Set the regional configuration to use, including the format for displaying numbers, currency, date, and time on your device.
Managing Your Device 269 Connections tab Icon Description Advanced Network Turn on/off HSDPA, set the line type to use when making circuit switch data (CSD) connection, and set the GPRS authentication method. HSDPA is a 3.5G digital data service that provides high-speed downstream data rates. In order for your device to attain the high connection speed of HSDPA, your wireless service provider must support this feature and you must be within the coverage area of your service provider’s HSDPA network.
Managing Your Device 13.3 Changing Basic Settings Date and time To set the date and time 1. On the Home screen Home tab, tap the time display and then tap the Time tab. Tip Tap the More tab and select the Display the clock on the title bar in all programs option to show the clock on all screens. 2. Select the correct time zone and change the date or time. Note During synchronisation, the time on your device is updated with the time on your computer.
Managing Your Device 271 Regional settings The style in which numbers, currency, dates, and times are displayed is specified in regional settings. 1. On the Home screen, slide to the Settings tab and then tap All Settings. 2. On the System tab, tap Regional Settings > Region tab and then select your region from the list. Note This does not change the language of your device’s operating system. The region you select determines which options will be available on the other tabs. 3.
Managing Your Device To increase or decrease the size of text on the screen 1. On the Home screen, slide to the Settings tab and then tap All Settings. 2. On the System tab, tap Screen > Text Size tab. 3. Move the slider to increase or decrease the text size.
Managing Your Device 273 Ringer settings To change the ring type and ring tone 1. Press the TALK/SEND button to open the Phone screen and then tap Menu > Options. 2. On the Phone tab, select the desired Ring type and Ring tone from the provided lists and then tap OK. Tips • You can use *.wav, *.mid, *.mp3, *.wma, or other types of sound files that you downloaded from the Internet or copied from your computer as ring tones.
Managing Your Device To choose how to be notified about events or actions 1. On the Home screen, slide to the Settings tab and then tap Sounds > Advanced. 2. On the Sounds tab, choose how you want to be notified by selecting the appropriate check boxes. 3. On the Notifications tab, in Event, tap an event name and choose how you want to be notified by selecting the appropriate check boxes. You can choose from several options, such as a special sound, a message, a flashing light, or vibrate.
Managing Your Device 275 13.4 Using Task Manager Task Manager lets you view and stop running programs, configure the and enable the Quick Menu on the Home screen. button, To open Task Manager • Tap the Quick Menu button on the top right corner of the Home screen to open the Quick Menu, then tap ; or • On the Home screen, slide to the Settings tab and then tap All Settings. On the System tab, tap Task Manager.
Managing Your Device To close running programs from the Task Manager 1. On the Task Manager screen, tap the Running tab. 2. Do one of the following: • Select the check box of the programs that you want to close, then tap Stop Selected. • Tap Stop All to close all programs in the list. • Tip Tap Menu > Stop All but Selected to close all programs except those which check boxes are selected. You can also close running programs from the Quick Menu on the Home screen.
Managing Your Device 277 13.5 Protecting Your Device Protect your SIM card with a PIN You can protect your SIM card from unauthorised use by assigning a PIN (personal identification number). The default SIM card PIN is provided by your wireless service provider. To enable the SIM card PIN 1. On the Home screen, slide to the Settings tab and then tap All Settings. 2. On the Personal tab, tap Phone > PIN/PIN2 tab. 3. Select the Require PIN when phone is used check box. 4.
Managing Your Device 5. Enter the password in both the Password and Confirm boxes. 6. Tap OK. The next time the device is turned on, you will be prompted to enter your password. Notes • To ensure that you can always make emergency calls, do not begin your password with the digits of your local emergency number. • If you entered a hint, the hint will be displayed after the wrong password is entered five times.
Managing Your Device 279 13.6 Managing Memory To see how much memory is available for use 1. On the Home screen, slide to the Settings tab and then tap All Settings. 2. On the System tab, tap Memory > Main tab. The amount of memory allocated to data storage versus program storage is displayed, as well as the amount of memory in use versus the available memory. To see the available space of the storage card 1. On the Home screen, slide to the Settings tab and then tap All Settings. 2.
Managing Your Device 13.7 Resetting Your Device Soft reset Occasionally, you may need to reset your device. A soft (or normal) reset of your device clears all active program memory and shuts down all active programs. This can be useful when your device is running slower than normal, or a program is not performing properly. A soft reset is also necessary after the installation of some programs. If a soft reset is performed when programs are running, unsaved work will be lost.
Managing Your Device 281 Important If Encrypt files when placed on a storage card is enabled, backup all files from the storage card before using Clear Storage, hard reset, or updating the ROM system software. Otherwise you will no longer be able to access the encrypted files on the storage card. Use ActiveSync or Windows Mobile Device Center to transfer files between your storage card and computer. After the procedure, copy your files back to the storage card. To perform a hard reset 1.
Managing Your Device 13.8 Windows Update You can update Windows Mobile® on your device with the latest updates, security patches or fixes, if these are available. To set up Windows Update The first time you run Windows Update, you need to set up how you want Windows Update to check for patches on the Microsoft web site. 1. On the Home screen, slide to the Settings tab and then tap All Settings. 2. On the System tab, tap Windows Update. 3. On the Update Setup screen, tap Next. 4.
Managing Your Device 283 To change Windows Update options 1. On the Home screen, slide to the Settings tab and then tap All Settings. 2. On the System tab, tap Windows Update. 3. Tap Menu and select the option you want to change. • Tap Connections to change how the device connects to the Internet when checking for updates. • Tap Change Schedule to change how Windows Update checks for Windows Mobile® updates. 13.
Managing Your Device • Use the AC adapter to plug your device into an external power outlet whenever possible, especially when using a storage card or when using a modem or other peripherals. • Turn Bluetooth off when you are not using it. Make your device visible to other devices only when you are trying to establish a Bluetooth partnership. For more information about Bluetooth, see Chapter 9. • On the Home screen, slide to the Settings tab and then tap Communications.
Appendix A.1 Specifications A.
Appendix A.1 Specifications Processor Qualcomm® MSM7225™, 528 MHz Operating System Windows Mobile® 6.1 Professional Memory • ROM : 512 MB • RAM : 256 MB Dimensions (LxWxT) 102 x 53.5 x 14.5 mm (4.02 x 2.11 x 0.57 inches) Weight 103 grams (3.63 ounces) with battery Display 2.8-inch TFT-LCD touch-sensitive screen with QVGA resolution Network HSDPA/WCDMA: • 900/2100 MHz • Up to 384 kbps up-link and 7.
Appendix 287 Battery Rechargeable Lithium-ion battery Capacity: 1100 mAh Standby time: • Up to 400 hours for WCDMA • Up to 330 hours for GSM Talk time: • Up to 375 minutes for WCDMA • Up to 400 minutes for GSM (The above are subject to network and phone usage.) Expansion Slot microSD™ memory card (SD 2.
Appendix A.2 Regulatory Notices Regulatory Agency Identifications For regulatory identification purposes, your product is assigned a model number of IOLI100. To ensure continued reliable and safe operation of your device, use only the accessories listed below with your IOLI100. The Battery Pack has been assigned a model number of JADE160. Note This product is intended for use with a certified Class 2 Limited Power Source, rated 5 Volts DC, maximum 1 Amp power supply unit.
Appendix 289 • EN 300 440-2 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short range devices; Radio equipment to be used in the 1 GHz to 40 GHz frequency range; Part 2: Harmonized EN under Article 3(2) of the R&TTE Directive.
Appendix • • • Electromagnetic Compatibility (EMC) standard for radio equipment and services; Part 17: Specific conditions for 2.4 GHz wideband transmission systems. ETSI EN 301 908-1 & -2 Electromagnetic compatibility and Radio spectrum Matters (ERM); Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third Generation cellular networks; Part 1: Harmonized EN for IMT-2000, introduction and common requirements, covering essential requirements of article 3.2 of the R&TTE Directive.
Appendix 291 Safety Precautions for RF Exposure Use only original manufacturer-approved accessories, or accessories that do not contain any metal. Use of non-original manufacturer-approved accessories may violate your local RF exposure guidelines and should be avoided. Exposure to Radio Frequency (RF) Signals Your device contains a radio transmitter and receiver. The radiated output power is far below the international radio frequency exposure limits.
Appendix causing loss of performance and SAR levels exceeding the recommended limits as well as result in non-compliance with local regulatory requirements in your country. To assure optimal phone performance and ensure human exposure to RF energy is within the guidelines set forth in the relevant standards; always use your device only in its normal-use position. Do not touch or hold the antenna area unnecessarily when placing or receiving a phone call.
Appendix 293 Hearing Aids Some digital wireless phones may interfere with some hearing aids. In the event of such interference, you may want to consult your service provider, or call the customer service line to discuss alternatives. Other Medical Devices If you use any other personal medical device, consult the manufacturer of your device to determine if they are adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this information.
Appendix The WEEE logo (shown at the left) on the product or on its box indicates that this product must not be disposed of or dumped with your other household waste. You are liable to dispose of all your electronic or electrical waste equipment by relocating over to the specified collection point for recycling of such hazardous waste. Isolated collection and proper recovery of your electronic and electrical waste equipment at the time of disposal will allow us to help conserving natural resources.
Index Symbols 3G 150 A A-GPS 202 A2DP 182 ActiveSync - ActiveSync mode 49 - set up 104 - synchronise with computer 105 - synchronise with Exchange Server 134 Add and remove programs 238 Adobe Reader LE 239 Airplane Mode 61, 248 Alarm 273 Album - about 218 - close Album 223 - play back video 223 - select a photo or video to view 219 - view an image 220 Answering calls 56 Attachment - add to e-mail 127 - download 130 - set IMAP4 to automatically receive attachments 132 - set Outlook to automatically receiv
Index - printing 187 - SIM Access Profile (SAP) 62 - stereo headset 182 - synchronise 107 - turn on and off 248 - visible 180 C Calendar - create appointment 240 - send appointment 242 - view appointment 241 Call History 60 Calling - from Contacts 55 - from Home screen 55 - from Phone screen 53 Camera - about 206 - Advanced Options 215 - capture modes 206 - capture photos and videos 208 - file formats 208 - icons 209 - Menu Panel 211 - resolution 211 - zooming 212 Capture photos and videos 208 Car Kit
Index 297 E E-mail - Internet e-mail account (POP3/ IMAP4) 122 - mail server settings 123 - Mail tab (Home screen) 70 - send 127 - settings (POP3/IMAP4) 124 - setup wizard 122 - synchronise 100, 131, 134 - types of e-mail accounts 121 EDGE 150 Emergency call 55 Emoticon - MMS 118 - Windows Live Messenger 167 Ending calls 56 Equalizer 234 Excel Mobile 249 Exchange Server 134 F Favourite contacts 67 File Explorer 264 Find contact - Company Directory 142 - on device 246 Finger gestures 85 Finger panning 86
Index - install MIDlets/MIDlet suites from device 252 - install MIDlets/MIDlet suites from Internet 252 - manage MIDlets/MIDlet suites 253 - uninstall MIDlets 253 - update a MIDlet/MIDlet suite 253 L Letter Recognizer 96 Library - Music tab (Home screen) 78 - Windows Media Player Mobile 225 Live Messenger 166 Location Settings 202, 267 M Mail tab (Home screen) 70 Making calls 53 Map Search tab (Home screen) 81 Meeting request 140, 242 Memory 47, 279, 286 Messages tab (Home screen) 69 Messaging - abo
Index 299 People tab (Home screen) 67 Phone 52 Phone Keypad 91 Phone services 274 Photo capture mode 207 Photos and Videos tab (Home screen) 74 Picture Theme capture mode 208 PIN 52, 277 Playlists - Audio Manager 231 - Windows Media Player Mobile 229 Play media 228 Play music - Audio Manager 230 - Music tab (Home screen) 76 - Windows Media Player Mobile 228 Podcasts 177 POP3 122 PowerPoint Mobile 249 Profile 82 Programs 238 Programs tab (Home screen) 84 Put call on hold 58 Q QuickGPS 191 Quick menu 47, 27
Index - Connections 150, 151, 269 - Domain Enroll 269 - USB to PC 107, 269 - Wi-Fi 149, 269 - Wireless LAN 148 Settings (Personal tab) - Buttons 265 - Input 265 - Lock 265, 277 - Menus 266 - Owner Information 266 - Phone 266, 273, 274 - Sounds & Notifications 266, 274 - Today 266 - Voice Speed Dial 260, 266 Settings (System tab) - About 266, 272 - Car Kit Mode 204, 266 - Certificates 267 - Clear Storage 267, 281 - Clock & Alarms 267, 270, 273 - Customer Feedback 267 - Device Information 267 - Encryption
Index 301 - music and videos 108 - via Bluetooth 107 - Windows Media Player 226 - Windows Mobile Device Center 101 - with computer 82, 105 - with Exchange Server 82, 134 T T9 92 Task Manager 268, 275 Tasks 256 Text messages - copy from SIM card 114 - copy to SIM card 114 - create new message 111 - Messages tab (Home screen) 69 - send 112 Text size (screen) 272 TouchFLO 63, 268 Transcriber 96 Troubleshoot - sync connection 107 - Windows Media Player Mobile 229 Turn device on and off 38 Turn phone function
Index Z ZIP - about 261 - create archive 262 - open zip file and extract files 261 Zooming - Album 221 - Camera 212 - finger gestures 86 - Opera Mobile 155
