Instructions / Assembly

Mississippi Arm Chair

Assembly Instructions

Parts List Quantity

A. Side Frame

B. Chair Seat

C. Chair Back

D. M8 Nut

E. Lock Washer

F. Flat Washer

Assembly:

We suggest you assemble the chair on a soft surface to protect the finish

Step 1. Place the chair seat on a soft surface and upside down. Install the legs and seat

using the M8 Nut with flat and lock washer.

Attention: The bolts are on the side of the chair seat

Step 2. Attach the back using four nuts with flat and lock washer. the bolts are on the

legs.

Step 3. Stand the unit upright on a flat level surface. Align the sides with seat and

back. So the unit is level and the top of legs are parallel.

Now tighten the all the nuts to lock the unit in its permanent condition, and put the

safe cup on the back of the chair.

Caution:

The unit is manufactured of cast metal parts and is brittle. Do not force any part of the

assembly and do not over-tighten the bolts, serious damage can occur.

2 PCS

1PC

8 PCS