Instructions / Assembly

SD182.T 1.6 M Hexangular Arch Mesh Table

（With 60cm Inside Lazy Susan）

Assembly Instructions

Parts List Quantity

Table Top

Table Leg

Center Plate

Small Table & Lazy Susan

Adjust Rubber Feet

Hex Bolt

Spring Washer

Flat Washer

Wrench

Assembly

We suggest you assemble the product on a soft surface to protect the

finish

Step 1. Place the tabletop on a soft surface and upside down. Install the legs with

the table using the Hex bolts with spring and flat washers.

Step 2.Put the center plate between the four legs, Install the center plate with the

legs using The Hex bolts with spring and flat washers

Step 3. Now tighten all the nuts to lock the unit in its permanent condition. Then

put the rubber feet on the bottom of the four legs.

Caution:

The unit is manufactured of cast aluminum parts and is brittle. Do not force any

part of the assembly and do not over-tighten the bolts, serious damage can occur.

1pc

4pcs

1pc

4pcs

16pcs

1pc

PAGE 1
SD182.T 1.6 M Hexangular Arch Mesh Table （With 60cm Inside Lazy Susan） Assembly Parts List Table Top Table Leg Center Plate Small Table & Lazy Susan Adjust Rubber Feet Hex Bolt Spring Washer Flat Washer Wrench Instructions Quantity 1pc 4pcs 1pc 1pc 4pcs 16pcs 16pcs 16pcs 1pc Assembly We suggest you assemble the product on a soft surface to protect the finish Step 1. Place the tabletop on a soft surface and upside down. Install the legs with the table using the Hex bolts with spring and flat washers.