Instructions / Assembly

2
BEFORE YOU BEGIN
Before beginning assembly, make sure all parts are present. Compare parts received with the “Parts List.” If
any part is missing or damaged, do NOT attempt to assemble the product. Please read and understand this
entire manual before attempting to assemble, operate or install this product. If you have any questions
regarding the product, please contact customer service.
GENERAL INFORMATION
Your new chair is made from the finest materials available. It should provide many years of enjoyment with
minimal care.
Keep your chair clean and apply a coat of wax a few times a year. For best results, clean the chair with warm
soapy water and use an outdoor furniture wax. If you use furniture covers, always make sure the chair is
clean and completely dry before covering as mold may form in dark, wet places. Check the bolts on your
chair regularly to make sure they are tight.
To provide a rust free product this chair is made of Cast Aluminum which is a relatively soft material. Be
careful not to over tighten your hardware. Stripped hardware is not covered under the manufacturer’s
warranty. The weight limit for this chair is 400 lbs.
SAFETY INFORMATION
WARNING
DO NOT stand or allow children to stand on the assembled product. DO NOT lean the chair on two legs or
allow it to be placed on an uneven surface. DO NOT tighten bolts completely until instructed to do so. After
final alignment, make sure all nuts and bolts are securely fastened. NEVER use a power tool to assemble or
tighten your furniture. Perform periodic checks to make sure the hardware is secure and tighten if needed.
CAUTION
READ all instruction before beginning assembly. Failure to do so may result in faulty assembly and potential
injury. Assemble the item on a soft, non-abrasive surface such as a carpet or cardboard to avoid damaging
the item.
INFORMATION