Instructions / Assembly

16
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
Burner will
not light
Propane cylinder is frosted over
Wait until the propane cylinder warms up and becomes
unfrosted
Blockage in orifice
Clear blockage
Control knob is not in ON position Turn control knob to ON
Burner flame
is low
Gas pressure is low Turn cylinder valve OFF and replace cylinder
Outdoor temperature is less than
40°F and tank is less than 1/4 full
Use a full cylinder
Control knob fully ON
Check burner and orifices for blockage
Carbon build-up
Thick Black Smoke
Dirt or film on burner screen
Clean burner screen
Blockage in burner
Remove blockage and clean burner screen inside and
outside.