Instructions / Assembly

ASSEMBLY

and cylinder are sold separately. Use a standard 20lb

Connect hose and regulator to cylinder. The propane gas

propane cylinder only. Use this fi e pit only with a propane vapor

withdrawal supply system. See chapter 5 of the standard storage

and handling of liquefied pet oleum gas, ANS/NFPA 58. Your local

library or fi e department should have this book.

Storage of an appliance indoors is permissible only if the cylinder

is disconnected and removed from the appliance. A cylinder must

be stored outdoors in a well-ventilated area out of the reach of

children. A disconnected cylinder must have dust caps tightly

installed and must not be stored in a building, garage or any other

enclosed area. The maximum inlet gas supply pressure:

250 psi, the minimum inlet gas supply pressure: 5 psi.

The minimum hourly of 10,000 BTU is required input

rating for a fi e pit for automatic operation at ratings less

than full input rating. The pressure regulator and hose

assembly supplied with the appliance must be used.

The installation must conform with local codes, or in

the absence of local codes, with national fuel gas code,

ANSI Z223.1/NFPA54, natural gas and propane

Installation Code, CSA B 149.1, or propane storage and

handling code, B149.2.