Mattes Chair by OAKWORKS ® OPERATION INSTRUCTIONS ASSEMBLED BY HAND IN THE USA Phone: 717.235.6807 www.oakworks.
Mattes Chair by OAKWORKS OPERATION INSTRUCTIONS ® CAUTION MAXIMUM WORKING LOAD RATING 300 LBS. (136 KG) UNPACKING 1. Remove the optional pad from the box (if ordered). 2. Remove the carry strap from the box. Figure 1 3. Remove the chair from the box & place it on a protected floor or table with the legs up. (Figure 1) CHAIR SET UP 1. Unfasten leg strap. (Figure 2) Figure 2 Figure 3 2. Unlock 2 leg safety clamps. (Figure 3) 3. Lift legs and put horizontal leg tube into the safety clamp nest.
8. The seat belt strap is used to stabilize the person in the chair during side-bending motions. A Velcro® system allows you to adjust the fit for each client. (Figure 10) Figure 10 Figure 11 9. Finger grips located under the seat are used to help the client stabilize their trunk, or aid in rotation during various stretches and movements. (Figure 11 & 12) 10. The horizontal bar is grasped by the client to help them stretch forward. (Figure 13) CHAIR FOLDING Figure 12 Figure 13 1.
Mattes Chair by OAKWORKS ® OPERATION INSTRUCTIONS CONTACT INFORMATION: Oakworks® Inc. 923 East Wellspring Road New Freedom, PA 17349 Toll Free (USA only): 800-916-4613 Phone: 717-235-6807 FAX: 717-235-6798 www.oakworks.com Manual Part Number MMMNML0001 Revision date: 10.17.