User MANUAL OAKWORKS PX & PT Tables ® PX Series PT Series made in the USA with US & imported parts www.oakworksmed.com · 717.235.
© Copyright 2013 Oakworks® , Inc. Notice The information contained in this document is subject to change without notice and should not be construed as a commitment by Oakworks®, Inc. Printed in U.S.A. All rights are reserved. No part of this document may be photocopied, reproduced or translated to another language without prior written consent of Oakworks®, Inc. Oakworks® is a registered trademark of Oakworks®, Inc. Oakworks®, Inc.
Table of Contents Product Use Description ..................................................................................................... 1 Important Safety Instructions Symbol Identification..................................................................................................... 1 Safety Instructions ......................................................................................................1-2 Product Description & Photo PX100....................................................
Product use description / important safety instructions product use description The Oakworks PX & PT Tables are used to support the patient during examinations and procedures. They are intended to be operated by a healthcare professional in a medical environment. No special training is required but a review of the following Safety Instructions is important for the safety of the operator and patient. The healthcare professional should read and understand this entire manual before use with a patient.
Important Safety instructions Weight Limit: (patient and accessories) 550 lbs. (250 kg) Do not exceed. The Back Rest and Leg Rest sections are not designed to support the entire weight of the patient. Do not sit on the Back Rest or Leg rest sections. Be certain that the table is completely lowered without any tilt being present prior to discharging an ambulatory patient. The patient may lose balance and fall.
Product Description PX100 Upholstered Top QuickLock™ Face rest with Boiance™ Crescent Self-locking molded rubber feet (2) Accessory attachment outlets Steel Scissor-style powder-coated base with dual crossbeams (1) Wheels (2) Foot Control Standard Specifications Height Range Powered 18”-35” (46-89 cm.) Length 73” (185 cm.) Foot Control Height Motion Padding 3” (8 cm.) Comfort Foam Table Voltage Options 120V/60Hz or 230V/50Hz Upholstery Terra Touch™ Table Capacity 550 lbs. (250 kg.
Product Description PX150 Manual Lift-Assist Back Rest control Upholstered Top Self-locking molded rubber feet (2) Accessory attachment outlets Steel Scissor-style powder-coated base with dual crossbeams (1) Wheels (2) Foot Control Standard Specifications Motion 1 Powered 21”-38” (55-97 cm.) Height Range Length 73” (185 cm.) Motion 2 Manual 0º - 79º Backrest Padding 3” (8 cm.
Product Description PX300 Table Extender (accessory) Adjustable Arm Rests (2) (accessory) Manual Lift-Assist Back Rest control Upholstered Top Self-locking molded rubber feet (2) Steel Scissor-style powder-coated base with dual crossbeams (1) Accessory attachment outlets Wheels (2) Multi-function Foot Control Standard Specifications Motion 1 Powered 21”-38” (55-97 cm.
Product Description PT100 Upholstered Top Wheels (2) Single 24v motor with cover Foot Control Steel Scissor-style powder-coated base with dual crossbeams (1) Self-locking molded rubber feet (2) Optional Dual Locking Casters Standard Specifications Height Range Powered 16”-34” (40-86 cm.) Foot Control Height Motion Table Voltage Options 120V/60Hz or 230V/50Hz Table Capacity 550 lbs. (250 kg.) (patient and accessories) Widths 27” (69 cm.) or 29” (74 cm.) Length 73” (185 cm.) Padding 1.
Product Description PT150 Manual Lift-Assist Back Rest control Upholstered Top Seat section with Integrated Face Rest Steel Scissor-style powder-coated base with dual crossbeams (1) Single 24v Motor with cover Self-locking molded rubber feet (2) Wheels (2) Foot Control Standard Specifications Motion 1 Powered 16”-34” (40-86 cm.
Product Description PT200 Upholstered Top Articulating Head Rest Section with Adjustable Face Rest Cushion & Insert Pad Single 24v Motor with cover Manual Control for Back Rest Top Wheels (2) Foot Control Self-locking molded rubber feet (2) Steel Scissor-style powder-coated base with dual crossbeams (1) Optional Dual Locking Casters Standard Specifications Motion 1 Powered 16”-34” (40-86 cm.
Product Description PT250 Upholstered Top Articulating Head Rest Section Self-locking molded rubber feet (2) Manual Control for Articulating Head Rest Section Steel Scissor-style powder-coated base with dual crossbeams (1) Foot Control Single 24v motor with cover Wheels (2) Optional Dual Locking Casters Standard Specifications Motion 1 Powered 16”-34” (40-86 cm.
Product Description PT300 Manual Lift-Assist Back Rest control Articulating Head Rest Section Optional Dual Locking Casters Steel Scissor-style powder-coated base with dual crossbeams (1) Foot Control Single 24v motor with cover Manual Control for Articulating Head Rest Section Wheels (2) Standard Specifications Motion 1 Powered 16”-34” (40-86 cm.) Height Range Motion 3 Manual 40˚ to -90˚ Articulating Head Rest Motion 2 Manual 0º - 90º Fowler Backrest Foot Control Height Motion Padding 1.
Product Description PT400 Electrically Controlled Center Break Manual Lift-Assist Back Rest control Articulating Head Rest Section 24v motor Optional Dual Locking Casters Steel Scissor-style powder-coated base with dual crossbeams (1) Foot Control Single 24v motor with cover Manual Control for Articulating Head Rest Section Wheels (2) Standard Specifications Motion 1 Powered 17”-34” (43-86 cm.
Product Description PT400M Electrically Controlled Center Break Self-locking molded rubber feet (2) 29.5” (75 cm.) 11” (29 cm.) QuickLock Platform & Boiance Face Pad 21.5” (55 cm.) ” .25 16 cm.) 1 (4 Steel Scissor-style powder-coated base with dual crossbeams (1) Wheels (2) Foot Control 22” (56 cm.) 77” (196 cm.) ” 4.5 m.) c 1 1 ( Single 24v motor with cover 44.5” (113 cm.
Product Description Orthopedic Hi-Lo Casting Table Upholstered Top Gas Assist Control for Backrest Retractable side rail Self-locking molded rubber feet (2) Resin casting cover Manual Control for Articulating Casting Section Optional Dual Locking Casters Single 24v motor with cover Steel Scissor-style powder-coated base with dual crossbeams (1) Foot Control Wheels (2) Standard Specifications Motion 1 Powered 17”-35” (43-89 cm.
installation The Tables come completely assembled and ready to use. Plug the cord into a functioning outlet that is rated for the table. (see Grounding below) Arrange the power cord and control cords so that they will not create a tripping hazard and where the controls are located to your liking and are conveniently accessible. Be sure access to plug is not blocked for disconnecting the table from power. Grounding DANGER Risk of Electric Shock - Connect this furnishing to a properly grounded outlet only.
Directions for use Control Operations - all tables except PX300, pt400 & pt400M) caution Be sure the self-locking molded rubber feet are flat side down to ensure safety and stability. The tables offer height positioning with electronic ease. Operate the Foot control and Optional Hand Control as shown below to raise or lower the height of the table.
Directions for use foot Control Operations - pt400 & pt400M tables only caution DO NOT sit or stand on the articulating head rest section. Be sure the self-locking molded rubber feet are flat side down to ensure safety and stability. The Oakworks® PT400 and PT400M tables offer height and center break positioning with electronic ease. Operate the Foot control as shown below to raise or lower the height and center break functions of the table.
Directions for use hand Control Operations - pt400 & pt400M tables only caution DO NOT sit or stand on the articulating head rest section. Be sure the self-locking molded rubber feet are flat side down to ensure safety and stability. The Oakworks® PT400 and PT400M tables offer height and center break positioning with electronic ease. Operate the Optional Hoot control as shown below to raise or lower the height and center break functions of the table.
Directions for use foot Control Operations - PX300 tables only caution Do not sit backrest ot leg rest sections. Be sure the self-locking molded rubber feet are flat side down to ensure safety and stability. The hood area under the backrest top is not designed for storage. DO NOT use this area for holding anything. Damage can occur to the table. The Oakworks® PX300 tables offer height, backrest and footrest positioning with electronic ease.
Directions for use hand Control Operations - PX300 tables only caution Do not sit backrest ot leg rest sections. Be sure the self-locking molded rubber feet are flat side down to ensure safety and stability. The hood area under the backrest top is not designed for storage. Do not use this area for holding anything. Damage can occur to the table. The Oakworks® PX300 tables offer height, backrest and footrest positioning with electronic ease.
Directions for use adjusting the back rest section caution Do not sit on the Backrest section. px150 tables only Back Rest Control To raise the back rest To lower the Back rest: To change lever position: Raise the back rest by pressing the lever under the head section and lifting up to the desired height. It is recommended that clients take some of their weight off the back rest while you lift. Press the lever under the head section and push the back rest down.
Directions for use articulating head rest use caution Do not sit or stand on the articulating head rest section. Do not use Head Rest Section in assisting the client on or off the table. Grasp Firmly & Lift Release Knob To raise the Head rest To lower the Head rest: Grasp the edge of the section and lift up until you have achieved the angle needed. Release and it will lock into place automatically. Twist and hold the knob under the head rest and push the head rest down.
Directions for use pt400m - rotating arm rests use Be sure to install the arm rest on the correct side of the table. The arm rest will contour to the table top as shown. Screw the Arm Rests into the predrilled hole on the under side of each side of the table. Adjust the Arm Rests as needed for support and patient access. pt400m - Removable Extension Pad use Extension Pad Used as a Lowered Arm Rest Screw the Extension Pad Attachment Bracket it into the head end of the table using the predrilled hole.
Directions for use moving the table caution Before moving any of the Tables, disconnect the power cord from the power outlet. The table weighs as much as 200 lbs. (91 kg.) Use extreme caution when lifting the table to move it. Two people are required to move the table safely. DO NOT use the table to transport a patient. The tables are equipped with two wheels at one end and two self-locking, molded rubber feet at the other. When ready to move the table, first lower the table to its lowest position.
directions for use table extender use caution Do not put excessive weight or pressure on the table extender. The Table Extender lengthens the table for your tallest clients and can improve access to your patient. Accessory attachment outlets Locate the Accessory attachment outlets. Insert the Table Extender tubes. quicklock face rest caution * U.S. Patent #5,177,823 Do not put excessive weight or pressure on the Quicklock Face Rest. Do not extend the dowels of the Quicklock Face Rest 3” (7.6 cm.
directions for use adjustable Arm Rest Installation and Adjustment caution Do not use the arm rest for patient support during the mounting or dismounting of the chair. The arm rest is not designed to support the patient’s weight. to install the arm rests: The Arm Rests adjust automatically as the back rest moves to remain parallel to the floor. 1. Insert end of arm rest into backrest hole while holding the arm rest at a 60° angle to the backrest. 2.
cleaning & disinfection / inspections / warranty cleaning & disinfection warning Before cleaning with any liquid cleaner be sure to unplug the power cord from the outlet. Use a 10% sodium hypochlorite (bleach) solution or Recommended Disinfectants on all surfaces. Clean all sides of each upholstered section. Follow the directions on the disinfectant and wipe off excess.
model number & serial number PX Series Model Number Serial Number Model Numbers and Serial Numbers always start with a letter. 16796025 PXEXFT311873ACTTVN Ser#: PXR563146 PX FT 30 x 22-38 x 72 3M/TT/2S TTSKYBLUE 01/04/2013 Order#:654321 Notes: Sample Product Label The model number and serial number are located on the underside of the foot section. Model Number description P X E X F T X X X X X X A C T T VN F 6 Options - May be in any order.
model number & serial number PT series Model Number Serial Number Model Numbers and Serial Numbers always start with a letter. 16796025 PXSLA3311873ACTTVN Ser#: PXR563146 US G2 30 x 22-38 x 72 3M/TT/2S TTSKYBLUE 01/04/2013 Order#:654321 Notes: Sample Product Label The model number and serial number are located on the underside of the foot section. Model Number description PX SL A3 XX XX XX FR TT XX PT CS Options - May be in any order.
specifications product specifications Table Weights: Shipping Weights: Lifting Capacity 151-202 lbs. (68-92 kg.) 236-287 lbs. (107-130 kg.) 550 lbs. (250 kg.
specifications Guidance and manufacturer’s declaration - electromagnetic emissions The table is intended for use in the electromagnetic environment specified below. The customer or the user of the table should assure that it is used in such an environment.
specifications Guidance and manufacturer’s declaration - electromagnetic immunity The table is intended for use in the electromagnetic environment specified below. The customer or the user of the table should assure that it is used in such an environment.
specifications Guidance and manufacturer’s declaration - electromagnetic immunity The table is intended for use in the electromagnetic environment specified below. The customer or the user of the table should assure that it is used in such an environment.
User MANUAL OAKWORKS PX & PT Tables ® Contact Information: Oakworks® Inc. 923 East Wellspring Road New Freedom, PA 17349 Phone: 717-235-6807 FAX: 717-235-6798 www.oakworksmed.com 3034177 CONFORMS TO: ANSI/AAMI STD ES60601-1 IEC STD 60601-1 3rd Edition IEC STD 60601-1-2 3rd Edition IEC STD 60601-1-6 3rd Edition Certified to CAN/CSA STD C22.2 No.
