- Oasis Heating Module Diesel and AC Heating System for Recreational Vehicles and Yachts Installation and Operating Manual

Installing the Distribution

Module, DM12

Thank you for purchasing the Distribution Module, DM12.

This section describes its installation.

9.1 Installing your Distribution Module

Equipment, Tools and Skills

As the Installer, you must be qualified and authorized to do the

installation which requires mechanical and electrical knowledge.

Section

NOTICE

The module is to be installed in accordance with the

standards and regulations of authorities having

jurisdiction. Proper workmanship is essential to the proper

function and life of your module as well as protecting your

warranty.

9.2 Selecting the Module Location

The installation should consider the following:

• Mounting location must be able to support double the gross

weight of the Distribution Module (i.e. 33 lbs. x 2 = 66

lbs./13 KG x 2 = 26 KG) and must be of a non-combustible

and non absorptive surface.

• The module must be mounted in an area that provides

unrestricted access to the front panel (minimum of 6” top

clearance) with 3” clearance to all other module surfaces.

• Module is 11”H x 14”W x 6.5” D. (27.9cm x 35.5cm x

15.2cm). See Figure 9-1: Distribution Module, DM12.

International Thermal Research 9-1