Specification

SPORTS BOTTLE FILLER
MWSBF, MW8SBF, MW12SBF
Suggested Specification
Model MW8SBF shall deliver 8.0 gph of 50°F water at 90°F
ambient and 80°F inlet water. Model MW12SBF shall deliver
12.0 gph of 50°F water at 90°F ambient and 80°F inlet water.
Model MWSBF is a non-refrigerated Bottle Filler and delivers
chlorine reduction. Key molded components of the bottle filler
contain Freshield, WHICH UTILIZES a silver-based antimicro-
bial compound that reduces the growth of micro-organisms and
mildew to protect the surfaces from discoloration, odors and
degradation. Basin shall be designed to eliminate splashing
and standing water. Cooling system shall use R-134a refriger-
ant. Shall comply with ANSI A117.1 and ADA.
Model
MW8SBF delivers 8.0 gallons of chilled drinking water per hour.
MW12SBF delivers 12.0 gallons of chilled drinking water per hour.
MWSBF is a non-refrigerated bottle filler.
Standard Features
> Built-in 100 micron strainer stops particles before they enter
the waterway
> Waterways are Lead-free in Materials & Construction
> Heavy Duty steel frame
> High Efficiency cooling tank and coil
> Refrigerant R-134a
Finishes
> Standard cabinet finish: Brushed Stainless Steel
> Optional cabinet finish: Regency Bronze
Options (at additional cost)
□ Ultra Violet filtration
Installation
> Prior to roughing, consult with local, state and federal codes
for proper mounting height
> Shipped with complete instructions and wall mounting
bracket
> Removable front panels allow for easy access to filtration
and refrigeration unit
ADA Compliant for reach ranges. These models meet
guidelines for children’s (ages 5 and up) accessibility
providing the floor to button height is less than 40
inches and proper clear floor space is provided for
frontal approach. (9-12 = 44” / Adult = 48”)
Components in this fountain are lead free as defined
by the Safe Drinking Water Act Amendments of 1986,
and the Lead Contamination Control Act of 1988.
Product Certified to NSF/ANSI Standard 61 and is in compli-
ance with California's Health & Safety Code Section 116875
(commonly known as AB1953). The Green Filter has been
tested to the ANSI/ NSF standard 42 not by NSF
Models covered by this specification comply with all known
Plumbing Codes. Listed by Underwriters’ Laboratories to U.S.
and Canadian standards.
50° F Drinking Water
90° F Ambient Air Temp*
115 Volts, 60 HZ
Model
Rated Capacity
GPH
Base Rate
GPH
Compr.
HP
Full Load
Amps
Rated
Watts
Cabinet
Color Finish
Net Wt.
Approx.
MWSBF Yes 26 Lbs.
MW8SBF
8.0 8.0 1/5 4.6 340 Yes 78 Lbs.
MW12SBF
Specifications subject to change without notice*Industry Standard Rating Condition 80° F inlet water temperature.
12.0 12.0 1/5 8.7 620 Yes 78 Lbs.
ambient water. Unit shall include filtration for odor taste and
> Filtration system for taste, odor and chlorine reduction