Technical Specifications

Water Coolers
BARRIER-FREE VERSACOOLER
®
II
P8AC, PAC
Suggested Specification
Model P8AC shall deliver 8.0 gph of 50° F degree water at 90° F
ambient and 80° F inlet water. Model PAC is a non-refrigerated
drinking fountain and delivers ambient water. Models P8AC and
PAC shall include front and side push pads to activate the flow of
water. Basin shall be designed to eliminate splashing and standing
water. Bubbler shall have flexible guard and operate between 20
and 120 PSI. Cabinet finish shall be Sandstone or Greystone
powder coated paint on galvanized steel or brushed stainless
steel. Cooling system shall use R-134a refrigerant. Shall comply
with ANSI A117.1 and ADA. Shall be listed by Underwriters’
Laboratories to U.S. and Canadian standards. Shall comply with
ANSI/NSF 61.
Models
P8AC delivers 8.0 gallons of chilled drinking water per hour.
PAC is a non-refrigerated fountain.
These models satisfy CABO/ANSI A117.1 and these water coolers
comply with ADA requirements when properly installed. Models
also meet guidelines for children’s accessibility providing the floor
to orifice height is 30 inches and proper clear floor space is
provided for frontal approach.
Standard Features
> Built-in 100 micron strainer stops particles
before they enter the waterway
> Waterways Are Lead-Free In Materials & Construction
> Stainless Steel Top Flexible Bubbler Guard
> Heavy Duty Galvanized Steel Frame
> High Efficiency Cooling Tank and Coil
> Refrigerant R-134a
> Product Certified to NSF/ANSI Standard 61,
Annex G (AB1953)
> Four Push Pad Activation
> External Stream Height Adjustment
> Mechanical Activation
Finishes
> Standard Cabinet Finish: Sandstone powder coated
paint on galvanized steel
> Optional finishes at no additional cost: Greystone powder
coated paint on galvanized steel
> Optional finishes (at additional cost): Stainless Steel,
Regency Bronze, and optional powder coated finishes
Options (at additional cost)
> Glass Fillers (Factory Installed)
> Push Handle (029603-004)
> Push Back (029603-005)
> Push Down (029603-006)
> Stainless steel bubbler
Installation
> Prior to roughing consult with local, state, and federal
codes for proper mounting height.
> Shipped with complete instructions and wall mounting
bracket.
> Removable side and front panels provide easy
access for installation
ADA Compliant when properly installed
Components in this fountain are lead free as defined
by the Safe Drinking Water Act Amendments of 1986,
and the Lead Contamination Control Act of 1988.
Powder Coated Finish Warranty (Continental limits of the
United States and Canada): Three years on the powder coat
finish provided that the water cooler has not been subjected to
abuse, misuse, or alteration.
Limited 5-Year Warranty (Continental limits of the United
States and Canada): Five years on the sealed refrigeration
system and most component parts. Detailed warranty
certificate enclosed with each water cooler; sample available
upon request.
Export Warranty: One year on component parts. Detailed
warranty certificate enclosed with each drinking fountain;
sample copy available upon request.
Product Certified to NSF/ANSI Standard 61, Annex G (weighted
average lead content of <=0.25%) and is in compliance with
California's Health & Safety Code Section 116875 (commonly
known as AB1953).
Models covered by this specification comply with all known
Plumbing Codes. Listed by Underwriters’ Laboratories to U.S.
and Canadian standards.
Model
Rated Capacity
GPH
50° F Drinking Water
90° F Ambient Air Temp*
Base Rate
GPH
Pre-Cooler Hot ’N Cold™
Model
Compr.
HP
Full Load
Amps
Rated
Watts
115 Volts, 60 HZ
Glass Filler
Acc. Option
Cabinet
Color Finish
Net Wt.
Approx.
P8AC** 8.0 8.0 No No 1/4 4.6 460 Yes Yes 59 Lbs.
PAC Fountain Only Yes Yes 25 Lbs.
**Industry Standard Rating Condition 80° F inlet water temperature.
**Special export models available, operable on 220-240 volts, 50/60 Hz.
**Specifications subject to change without notice