Technical Specifications

ON-A-WALL
P8M,P14M,PM
Suggested Specification
Cabinet finish shall be Sandstone powder coated paint on
galvanized steel or brushed stainless steel. Cooling system
shall use R-134a refrigerant. Shall be listed by Underwriters’
Laboratories to U.S. and Canadian standards and conform
to European Union Directives.
Models
P8M delivers 8 gph of chilled drinking water
P14M delivers 14 gph of chilled drinking water.
PM is a non-refrigerated fountain.
Standard Features
> Waterways Are Lead-Free In Materials & Construction
> Dial-A-Drink
®
Bubbler
> Stainless Steel Top
> Welded Heavy-Gauge Steel Frame
> High-Efficiency Cooling Tank and Coil
> Refrigerant R-134a
> Product Certified to NSF/ANSI Standard 61,
Annex G (AB1953)
> Limited 5-year Warranty
Finishes
> Standard Cabinet Finish: Sandstone powder coated
paint on Galvanized Steel.
> Optional finishes (at extra cost): Stainless Steel,
Regency Bronze, optional powder coated finishes.
Components in these water coolers are lead free as
defined by the Safe Water Act Amendments of 1986,
and the Lead Contamination Control Act of 1988.
Accessories
> Trim Bezel to conceal wall surface discoloration
when cooler is installed as a replacement.
> Glass Fillers: Push handle (029603-004)
> Glass Fillers: Push back (029603-005)
> Glass Fillers: Push down (029603-006)
> Kit 029137-002 is required for Field Installation for
the above glass fillers (Except Models PLF8MH and
Regency Bronze finish.)
Installation
> Prior to roughing-in consult with local, state, and federal
codes for proper mounting height.
> Shipped with complete instructions and wall mounting
bracket.
> Removable panels provide easy access for installation.
Limited 5-Year Warranty (Continental limits of the United
States and Canada): Five years on the sealed refrigeration
system and most component parts. Detailed warranty
certificate enclosed with each water cooler; sample
available upon request.
Export Warranty: One year on the sealed refrigeration
system and most component parts. Four-year replacement
contract on sealed refrigeration system. Detailed warranty
certificate enclosed with each drinking fountain; sample
copy available upon request.
Product Certified to NSF/ANSI Standard 61, Annex G
(weighted average lead content of <=0.25%) and is in
compliance with California's Health & Safety Code Section
116875 (commonly known as AB1953).
Models covered by this specification comply with
all known Plumbing Codes. Listed by Underwriters’
Laboratories to U.S. and Canadian standards and
conform to European Union Directives.
**Specifications subject to change without notice
Model
Rated Capacity
GPH
50° F Drinking Water
90° F Ambient Air Temp*
Base Rate
GPH
Pre-Cooler Hot ’N Cold™
Model
Compr.
HP
Full Load
Amps
Rated
Watts
115 Volts, 60 HZ
Glass Filler
Acc. Option
Cabinet
Color Finish
Net Wt.
Approx.
P8M 8.0 8.0 No No 1/5 4.3 320 Yes Yes 73 Lbs.
P14M**
PM
14.0 7.8 Yes No 1/5 4.6 320
Yes Yes 76 Lbs.
Yes 35 Lbs.
**Industry Standard Rating Condition 80° F inlet water temperature.
**Special export models available, operable on 220-240 volts, 50/60 Hz.
Water Coolers