Specification

BARRIER-FREE VERSACOOLER
®
II
Energy and Water Conservation Technology
PG8AC, PGAC
Suggested Specication
Model PG8AC shall deliver 8.0 gph of 50°F degree water at 90° F
ambient and 80°F inlet water. Model PGAC is a non-refrigerated
drinking fountain and delivers ambient water. Shall include four
antimicrobial copper push pads. Basin shall be designed to eliminate
splashing and standing water. Water saver bubbler reduce waste water
by 50% and shall have exible guard and operate between 20 and
100 PSI. Cabinet nish shall be sandstone on galvanized steel or
brushed stainless steel. Shall use R-134a refrigerant. Shall comply with
ANSI 117.1 and ADA. Shall be listed by Underwriters Laboratories to
US and Canadian standards. Shall comply with ANSI/NSF 61 and
NSF/ANSI 372.
Finishes
• Standard cabinet nish: Sandstone powder coated paint on
galvanized steel
• Optional nishes (at additional cost): Stainless steel and
optional greystone powder coated nishes
Installation
• Prior to roughing consult with local, state and federal codes for
proper mounting height
• Shipped with complete instructions and wall mounting bracket
• Removable side and front panels provide easy access for installation.
Limited 5-Year Warranty
(Continental limits of the United States and Canada)
Five years on the sealed refrigeration system and most
component parts. Detailed warranty certicate enclosed
with each water cooler; sample available upon request.
Export Warranty
One year on components parts. Detailed warranty
certicate enclosed with each drinking fountain;
sample copy available upon request.
Models
• PG8AC delivers 8.0 gallons of chilled drinking water per hour.
• PGAC is a non-refrigerated fountain.
Standard Features
• Built-in 100 micron strainer stops particles before they enter the
waterway.
• Waterways are Lead-Free in materials & construction.
• Flexible and one-piece water saver bubbler guard
• Stainless steel top and heavy duty galvanized steel frame
• High efciency cooling system
• Refrigerant R-134a
• Four antimicrobial copper push pads
• External stream height adjustment
• Mechanical activation
Options (at additional cost)
• Glass llers (factory installed)
• One piece chrome plated brass bubbler (036700-001)
• Apron for upper unit
• VersaFilter
* Industry standard rating condition 80° F inlet water temperature Specications subject to change without notice
Certications/Compliance
• Antimicrobial Copper - EPA Registration No. 89187-3
• Oasis International Electric Water Coolers are listed by
Underwriters Laboratories Inc. and comply with both U.S. and
Canadian Requirements.
• Product Certied to NSF/ANSI Standard 61-G & 372 and
conforms with the lead content requirements for “Lead Free”
plumbing as dened by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act.
• This unit complies with ARI standard 1010 Testing,
Operating and Rating requirements (electric water coolers only).
• These waters coolers comply with the requirements of ADA
(Americans with Disabilities Act) when properly installed.
Model
50
o
F Drinking Water
90
o
F Ambient Air Temp*
Hot’N Cold
Model
115 Volts, 60 HZ
Glass Filler
Acc. Option
Cabinet
Color Finish
Net Wt.
Approx
Rated Capacity
GHP
Base Rate
GHP
Pre-Cooler Compr. HP Full Load
Amps
Rated Watts
PG8AC 8.0 8.0 No No 1/4 4.4 450 Yes Yes 59 Lbs
PGAC Fountain Only Ye s Yes 25 Lbs