Technical Specifications

COMPACT ON-A-WALL
PLF4CM, PCM
Suggested Specfication
Cabinet finish shall be Sandstone powder coat paint on galva-
nized steel or brushed stainless steel. Cooling system shall use
R-134a refrigerant. Shall be listed by Underwriters’ Laboratories
to U.S. and Canadian standards and conform to European
Union Directives.
Models
PLF4CM delivers 4.0 gph of chilled drinking water.
PCM is a non-refrigerated fountain.
Standard Features
> Waterways Are Lead-Free In Materials & Construction
> Dial-A-Drink
®
Bubbler
> Stainless Steel Top
> Welded Heavy-Gauge Steel Frame
> High-Efficiency Cooling Tank and Coil
> Refrigerant R-134a
> Product Certified to NSF/ANSI Standard 61,
Annex G (AB1953)
> Limited 5-year Warranty
Finishes
> Standard Cabinet Finish: Sandstone powder coated paint
on Galvanized Steel.
> Optional finishes at extra cost: Stainless Steel, Powder
coated paint.
Components in these water coolers are lead free
as defined by the Safe Water Act Amendments of
1986, and the Lead Contamination Control Act of
1988.
Installation
> Prior to roughing-in consult with local, state, and federal
codes for proper mounting height.
> Shipped with complete instructions and wall mounting
bracket.
> Removable panels provide easy access for installation.
Limited 5-Year Warranty (Continental limits of the United
States and Canada): Five years on the sealed refrigera-
tion system and most component parts. Detailed warranty
certificate enclosed with each water cooler; sample
available upon request.
Export Warranty: One year on sealed refrigeration
system and most components parts. Four-year replace-
ment contract on sealed refrigeration system. Detailed
warranty certificate enclosed with each drinking fountain;
sample copy available upon request.
Product Certified to NSF/ANSI Standard 61, Annex G
(weighted average lead content of <=0.25%) and is in
compliance with California's Health & Safety Code Section
116875 (commonly known as AB1953).
Models covered by this specification complies with
all known Plumbing Codes. Listed by Underwriters’
Laboratories to U.S. and Canadian standards and
conform to European Union Directives.
**Specifications subject to change without notice
Model
Rated Capactity
GPH
50° F Drinking Water
90° F Ambient Air Temp*
Base Rate
GPH
Pre-Cooler Hot ’N Cold™
Model
Compr.
HP
Full Load
Amps
Rated
Watts
115 Volts, 60 HZ
Glass Filler
Acc. Option
Cabinet
Color Finish
Net Wt.
Approx.
4.0 2.5 Yes No 1/8 2.1
160
PLF4CM**
PCM
No Yes 51 Lbs.
YesNoFountain Only 24 Lbs.
*Industry Standard Rating Condition 80° F inlet water temperature.
**Special export models available, operable on 220-240 volts, 50/60 Hz.
PLACES
LF3CM and
PLF5CM
Water Coolers