SDS

ManualsBrandsOatey ManualsToolsH20® 95 Water Soluble Tinning Flux - 1.7 oz.

SAFETY DATA SHEET

1. Identification

Product identifier Oatey H2O 95 Tinning Flux

Other means of identification

SDS number

1614E

Synonyms

Part Numbers: 301410, 30142, 30143, 53068, 53073

Recommended use

Joining Copper Pipes. Joining Copper Tubing.

Recommended restrictions

None known.

Manufacturer/Importer/Supplier/Distributor information

Company Name

Oatey Co.

Address

4700 West 160th St.

Cleveland, OH 44135

Telephone

216-267-7100

E-mail

info@oatey.com

Transport Emergency

Chemtrec 1-800-424-9300 (Outside the US 1-703-527-3887)

Emergency First Aid

1-877-740-5015

Contact person

MSDS Coordinator

2. Hazard(s) identification

Not classified.

Physical hazards

Category 1BSkin corrosion/irritation

Health hazards

Category 1Serious eye damage/eye irritation

Not classified.

OSHA defined hazards

Label elements

Signal word

Danger

Hazard statement

Causes severe skin burns and eye damage.

Precautionary statement

Prevention

Wash thoroughly after handling. Wear protective gloves/protective clothing/eye protection/face

protection. Do not breathe dusts or mists.

Response

If swallowed: Rinse mouth. Do NOT induce vomiting. If on skin (or hair): Take off immediately all

contaminated clothing. Rinse skin with water/shower. Wash contaminated clothing before reuse. If

inhaled: Remove person to fresh air and keep comfortable for breathing. Immediately call a

poison center/doctor. If in eyes: Rinse cautiously with water for several minutes. Remove contact

lenses, if present and easy to do. Continue rinsing.

Storage

Store locked up.

Disposal

Dispose of contents/container in accordance with local/regional/national/international regulations.

Hazard(s) not otherwise

classified (HNOC)

None known.

Supplemental information

Not applicable.

3. Composition/information on ingredients

Mixtures

56-81-5 6-12Glycerin

CAS number %Chemical name

Oatey H2O 95 Tinning Flux SDS US

922601 Version #: 04 Revision date: 19-February-2015 Issue date: 11-November-2014

1 / 7

Summary of content (7 pages)

PAGE 1
SAFETY DATA SHEET 1. Identification Product identifier Oatey H2O 95 Tinning Flux Other means of identification SDS number 1614E Synonyms Part Numbers: 301410, 30142, 30143, 53068, 53073 Recommended use Joining Copper Pipes. Joining Copper Tubing. Recommended restrictions None known. Manufacturer/Importer/Supplier/Distributor information Company Name Address Telephone E-mail Transport Emergency Emergency First Aid Contact person Oatey Co. 4700 West 160th St.
PAGE 2
Triethanolamine Hydrochloride 637-39-8 6-12 Tin 7440-31-5 4-8 Zinc chloride 7646-85-7 2-8 Ammonium chloride 12125-02-9 1-5 Bismuth 7440-69-9 0.1-1 Copper 7440-50-8 0.1-1 *Designates that a specific chemical identity and/or percentage of composition has been withheld as a trade secret. 4.
PAGE 3
7. Handling and storage Precautions for safe handling Conditions for safe storage, including any incompatibilities Do not get in eyes, on skin, or on clothing. Avoid prolonged exposure. Do not get this material on clothing. Provide adequate ventilation. Wear appropriate personal protective equipment. Observe good industrial hygiene practices. Store locked up. Store in original tightly closed container. Store away from incompatible materials (see Section 10 of the SDS). 8.
PAGE 4
9. Physical and chemical properties Appearance Physical state Solid. Form Solid. Paste. Color Gray. Odor Slight. Odor threshold Not available. pH Not available. Melting point/freezing point Not available. Initial boiling point and boiling range Not available. Flash point Not available. Evaporation rate Not available. Flammability (solid, gas) Not available. Upper/lower flammability or explosive limits Not available.
PAGE 5
Symptoms related to the physical, chemical and toxicological characteristics Burning pain and severe corrosive skin damage. Causes serious eye damage. Symptoms may include stinging, tearing, redness, swelling, and blurred vision. Permanent eye damage including blindness could result. Information on toxicological effects Acute toxicity Components Species Test Results Acute Inhalation LC50 Rat > 2.
PAGE 6
Hazardous waste code Waste from residues / unused products Contaminated packaging The waste code should be assigned in discussion between the user, the producer and the waste disposal company. Dispose of in accordance with local regulations. Empty containers or liners may retain some product residues. This material and its container must be disposed of in a safe manner (see: Disposal instructions). Empty containers should be taken to an approved waste handling site for recycling or disposal.
PAGE 7
Zinc chloride (CAS 7646-85-7) US. New Jersey Worker and Community Right-to-Know Act Ammonium chloride (CAS 12125-02-9) Copper (CAS 7440-50-8) Glycerin (CAS 56-81-5) Tin (CAS 7440-31-5) Zinc chloride (CAS 7646-85-7) US. Pennsylvania Worker and Community Right-to-Know Law Ammonium chloride (CAS 12125-02-9) Copper (CAS 7440-50-8) Glycerin (CAS 56-81-5) Tin (CAS 7440-31-5) Zinc chloride (CAS 7646-85-7) US.