MSDS

MSDS No: OTH110E5

Issue Date: 27 July 2005

Page: 1 of 4

MATERIAL SAFETY DATA SHEET

SECTION 1 PRODUCT AND COMPANY IDENTIFICATION

Trade Name: OATEY DARK THREAD CUTTING OIL

Product Use: Oil for pipe cutting and threading

Formula: Petroleum Distillates mixture

Synonyms: Thread cutting oil

Firm Name & OATEY CO. 4700 West 160th Street P.O. Box 35906 Cleveland,

Mailing Address: Ohio 44135, U.S.A. http://www.oatey.com

Oatey Phone Number: (216) 267-7100 or (800) 321-9532

Emergency Phone For Emergency First Aid call 1-303-623-5716 COLLECT. For

Numbers: chemical transportation emergencies ONLY, call Chemtrec at

1-800-424-9300. Outside the U.S. 1-703-527-3887.

Prepared By: Corporate Director – Safety and Environmental Compliance

Preparation Date: July 27, 2005

SECTION 2 COMPOSITION/INFORMATION ON INGREDIENTS

INGREDIENTS: %wt/wt: CAS NUMBER: ACGIH TLV TWA: OSHA PEL TWA: OTHER:

Petroleum distillates 90%, max. 69029-75-0 5mg/m3 5mg/m3 STEL:

10mg/m3

Petroleum distillates 25%, max. 69029-75-0 5mg/m3 5mg/m3 STEL:

10mg/m3

Sulfur additive 10%, max. 68153-70-8 None None None

Chlorinated paraffin 5%, max. 63449-39-8 None None None

OSHA Hazard Classification: Irritant.

SECTION 3 HAZARDS IDENTIFICATION

Emergency Overview:

Transparent dark amber fluid. Mild eye, skin, inhalation and ingestion

irritant.

SECTION 4 FIRST AID MEASURES

CALL 1-303-623-5716 COLLECT

Skin: Remove contaminated clothing immediately. Wash all exposed areas with

soap and water. Get medical attention if irritation develops.

Eyes: If material gets into eyes or if fumes cause irritation, immediately

flush eyes with plenty of water until chemical is removed. If

irritation persists, get medical attention immediately.

Inhalation: If respiratory irritation develops, remove to fresh air. If breathing

becomes difficult, administer oxygen. Administer artificial

has stopped. Seek immediate medical attention. respiration if breathing

Ingestion: DO NOT INDUCE VOMITING. Never give anything by mouth to a person who is

unconscious or drowsy. Get immediate medical attention by calling a

Poison Control Center, or hospital emergency room. If medical advice

cannot be obtained, then take the person and product to the nearest

medical emergency treatment center or hospital.

PAGE 1
MSDS No: Issue Date: Page: OTH110E5 27 July 2005 1 of 4 MATERIAL SAFETY DATA SHEET SECTION 1 PRODUCT AND COMPANY IDENTIFICATION Trade Name: OATEY DARK THREAD CUTTING OIL Product Use: Oil for pipe cutting and threading Formula: Petroleum Distillates mixture Synonyms: Thread cutting oil Firm Name & OATEY CO. 4700 West 160th Street P.O. Box 35906 Cleveland, Mailing Address: Ohio 44135, U.S.A. http://www.oatey.
PAGE 2
MSDS No: Issue Date: Page: OTH110E5 27 July 2005 2 of 4 SECTION 5 FIRE FIGHTING MEASURES Flashpoint / Method: > 300 Degrees F (149 Degrees C) / C.O.C. Flammability: LEL = Not available, UEL = Not available Extinguishing Use dry chemical, CO2, or foam to extinguish fire. Do not use water as it may be ineffective as an extinguishing agent.
PAGE 3
MSDS No: Issue Date: Page: OTH110E5 27 July 2005 3 of 4 SECTION 8: Continued Other: Eye wash and safety shower should be available. Other such as protective apron as necessary to prevent prolonged skin contact. SECTION 9 PHYSICAL AND CHEMICAL PROPERTIES Boiling Point: > 500 Degrees F / 260 Degrees C Melting Point: Not applicable Vapor Pressure: < 0.1 mm Hg at 20 degrees C Vapor Density: > 1.0 (Air = 1.
PAGE 4
MSDS No: Issue Date: Page: SECTION 12 VOC Information: VOC Level: OTH110E5 27 July 2005 4 of 4 ECOLOGICAL INFORMATION None Not established SECTION 13 DISPOSAL CONSIDERATIONS Waste Disposal: Dispose in accordance with current local, state and federal regulations.