Specification

SPEC SHEET #S00043/44
March 2002
Cutting Oil
Oils and Lubricants
Application specific lubricants for both manual and machine metal working operations. Used
for sawing, drilling, turning or thread cutting with all types of metals. These are superior
quality cutting oils formulated to produce consistent results under all weather conditions.
Hercules Cutting Oils contain activated sulfur to provide anti-weld properties, reduce
friction and prevent excessive heat generation, thus minimizing material expansion resulting
in ill-fitting joints. The high film strength of Hercules Cutting Oils maintains a continuous
contact of the lubricant with the work assuring quick, accurate and high quality cuts with
minimal tool wear. Lubricants contain no nitrosamine forming compounds or chlorinated oils.
Clear Cutting Oil
A blend of high quality mineral oils with sulfur base. Used for cutting clean, unbroken threads
during manual or low rpm threading machine operations on small sizes of steel and brass
pipe. Also applicable for hacksawing and light drilling. Will not stain copper or brass
materials.
Dark Cutting Oil
Extra heavy blend of high quality mineral oils with sulfur-lard base. Compounded to keep
tooling and work cool when used on high speed threading machines. Enables operators to
cut clean, sharp threads on steel or brass pipe. Ideal for thread cutting, tapping, broaching,
drilling or any application where high speeds and quality finishes are required. A superior
quality product that significantly extends tool life and reduces labor time.
STOCK NO. SIZE PACKING WEIGHT/CASE
Clear
40-110 1 pt. 24 28.6 lbs.
40-115 1 qt. 12 28.0 lbs.
40-120 1 gal. 6 49.4 lbs.
40-125 5 gal. 1 40.2 lbs.
40-140 55 gal. 1 452.0 lbs.
Dark
40-210 1 pt. 24 28.6 lbs.
40-215 1 qt. 12 28.0 lbs.
40-220 1 gal. 6 49.4 lbs.
40-225 5 gal. 1 40.2 lbs.
40-240 55 gal. 1 452.0 lbs.
SIZES AND PACKING
DESCRIPTION
Cutting Oil