Dimensions Guide

Visit www.oatey.com for updates
TECHNICAL SPECIFICATION: Oatey Great White
®
Pipe Joint Compound with PTFE is a white colored, non-separating
thread sealant compound designed to seal threaded connections against leakage due to internal pressure. This compound
permits a tighter assembly with lower torque, secure permanent sealing of all threaded connections and allows for easy
disassembly without stripping or damaging threads.
GREAT WHITE
®
PIPE JOINT COMPOUND
WITH PTFE
COMMON APPLICATIONS
CAN BE USED ON LINES CARRYING:
Acids (dilute) Hydrogen
Air (compressed) Inert Gases
Ammonia (gas, liquid) Nitrogen (gas)
Brine Soap (liquid)
Carbon Dioxide Steam
Castor Oils Vegetable Oils
Glycol Water (hot & cold)
Helium (gas) AND MANY MORE!
CAN BE USED ON PIPE MADE OF:
ABS Fiberglass
Aluminum PVC
Black Iron Polyethylene
Brass Polypropylene
Copper Stainless Steel
CPVC AND MANY MORE!
Consult Oatey Technical Department for applications not
specifically referenced above.
INGREDIENTS
Non-Hazardous: Calcium Carbonate, Hydrocarbon Oils,
PTFE, Titanium Dioxide and Clays
PRODUCT NUMBER
DESCRIPTION
PACK
CARTON WEIGHT
31229
1 fl. oz. Great White Pipe Joint Compound
12
1 lb.
31229D
1 fl. oz. Great White Pipe Joint Compound – Display
54
6 lbs.
312291
1 fl. oz. Great White Pipe Joint Compound – Gravity Feed Pack
120
8 lbs.
31230
4 fl. oz. Great White Pipe Joint Compound
12
7 lbs.
31230D
4 fl. oz. Great White Pipe Joint Compound – Display
48
27 lbs.
31231
8 fl. oz. Great White Pipe Joint Compound
12
12 lbs.
31231D
8 fl. oz. Great White Pipe Joint Compound – Display
30
28 lbs.
31232
16 fl. oz. Great White Pipe Joint Compound
24
29 lbs.
31233
32 fl. oz. Great White Pipe Joint Compound
12
40 lbs.
* FBC™ FlowGuard Gold
®
, BlazeMaster
®
, and Corzan® are registered trademarks of The Lubrizol Corporation.
APPROVALS AND LISTINGS
Standard 61 IAPMO listed.
for potable water.
FBC™ System Compatible indicates that this product has
been tested, and is monitored on an ongoing basis to
assure its chemical compatibility with FlowGuard Gold
®
water distribution, BlazeMaster
®
fire sprinkler systems
and Corzan® Piping Systems.*
05/2012
PHYSICAL/CHEMICAL PROPERTIES
Pressure Rating
Liquids 10,000 psi @ -50° F to 500° F
Gases 3,000 psi @ -50° F to 400° F
Required Dry Time Up to 125 psi, no wait
Over 125 psi, 4 hours
Appearance White Paste
Shelf Life 2 years from manufacture date
VOC Level 3 g/L Maximum
DIRECTIONS FOR USE
Clean all pipe threads. Be sure all joints are free from rust,
scale, grease or other contamination. Remove any debris with
a clean cloth or wire brush. Stir contents thoroughly and
apply evenly to male threads.
PRECAUTIONS
Read all cautions and directions carefully before using this
product. Contains no lead or other harmful metals and is
safe for use on potable water lines. DO NOT USE on lines
carrying Oxygen, Liquid Sodium, Ketones or Halogens. Do
not store near strong oxidizing agents, acids or extreme heat.
Keep container closed when not in use. DO NOT REUSE
EMPTY CONTAINER. KEEP OUT OF REACH OF CHILDREN.
Refer to material safety data sheet for more information.
For emergency first aid help, call 1-877-740-5015.
K-6