Specification

Visit
www.oatey.com
for updates
TECHNICAL SPECIFICATION:
Oatey Knock
-
Out Test Caps are a solvent weld test cap designed for use on Schedule 40 ABS
or PVC DWV piping for testing up to 17 PSI or 40’ head pressure. Knock-Out Test Caps deep design provides strong, leak-free
connection, while “tab” feature keeps hands free from solvent cement. Knock-Out center of test cap can be removed with
“tab” to prevent possible blockage in piping.
KNOCK-OUT™ TEST CAPS
PRODUCT NUMBER
DESCRIPTION
PACK
CARTON WEIGHT
33460
1
-
½” Knock
-
Out Test Cap Plug
1500
20 lbs.
39100
1
-
½” Knock
-
Out T
est Cap Plug
20
1 lb.
33461
2” Knock
-
Out Test Cap Plug
1200
22 lbs.
39101
2” Knock
-
Out Test Cap Plug
20
1 lb.
33462
3” Knock
-
Out Test Cap Plug
500
17 lbs.
39102
3” Knock
-
Out Test Cap Plug
15
2 lbs.
33463
4” Knock
-
Out Test Cap Plug
300
17 lbs.
39103
4
” Knock
-
Out Test Cap Plug
15
2 lbs.
06/20
11
PHYSICAL/CHEMICAL PROPERTIES
Material ABS
Color White
DIRECTIONS FOR USE
Solvent Weld Knock-Out Test Cap into piping end and
conduct hydrostatic pressure test up to 17 PSI or 40’ head
pressure.
PRECAUTIONS
Do not stand in the danger zone while test is in progress.
Never test piping system using compressed air.
COMMON APPLICATIONS
Oatey Knock-Out Test Caps are a solvent weld test cap
designed for testing up to 17 PSI or 40’ head pressure.
Consult Oatey Technical Department for applications not
specifically referenced above.
H
-
13
4700 W. 160
th
St.
Cleveland, OH 44135
PH:800-321-9532
FX:800-321-9535
www.oatey.com
TECHNICAL SPECIFICATION