How to Guide

FAQs
Shower Pan Liners
Q Can you install the pan liner when the oor has radiant heat?
A Yes. Only CPE liner is approved for this application because of its ability to withstand high heat.
Q What is the best way to wrap the shower pan liner over the curb?
A There are two ways to complete this application. The rst is to use one of the approved adhesives from
Liquid Nail product line; apply this product with a 1/8" trowel up the front, back and top surfaces of the
curb. Then press the liner down to conform to the curb shape, and nally nail the liner at the top edges
and on the outside curb surface. The second method is to cover (wrap) all three sides of the curb with
a cut (scrap) piece of liner and nail it into place. These nails can be located anywhere because they
will be covered by the second (nished) piece of pan liner. All the nails must be ush or recessed into
scrap piece of liner, without any sharp edges exposed. Then after cutting your nished liner to size and
reaching the curb wrapping step, apply the appropriate solvent cement for that material and cement the
nished liner to the scrap liner.