Installation Instructions
Job Name Item #
Location
Engineer Contractor
PO # Tag
Representative
SET-RITE
®
TOILET FLANGE
EXTENSION KIT(S)
SPECIFICATIONS
Oatey Set-Rite
®
products are designed for correcting elevations from 1/8"
up to 2-1/4" on existing PVC, ABS, Metal or Stainless Steel ange rings, as
well as Cast Iron Flanges. The Set-Rite
®
Toilet Flange Extension Kit is the
only patented, UPC listed, and trusted solution acceptable for repair and
renovation applications to restore the sealing surface of the ange.
MATERIALS
Virgin PPE
Durofoam
Stainless Steel - 410 Series
COMMON APPLICATIONS
Bathroom renovations often include new ooring that can create problems when
setting the toilet back on the existing closet ange. It is critical that the sealing
surface of an existing ange is above nished oor height to ensure a proper
seal. It can be costly to rework existing plumbing to restore the sealing surface,
so a ange extension product like Set-Rite
®
can correct the issue in minutes.
Oatey Co. | 20600 Emerald Parkway, Cleveland, OH 44135 | P: 1.800.321.9532 | Oatey.com
PRODUCT SELECTOR
4/18
P
Product
Number Description
Carton
Qty
Carton
Weight
43400
Toilet Flange Extension
Kit 1/8" up to 2-1/4"
5 1.200 LB
43401
Toilet Flange Extension
Kit 1/8" up to 1-1/2"
(Includes 3 spacers)
5 0.140 LB
43402
Toilet Flange Extension
Kit 1/8" up to 1-1/2"
(Includes 2 spacers)
5 0.140 LB
43403
Toilet Flange Extension
Kit 1/8" up to 1-1/4"
5 0.840 LB
43404
Toilet Flange Extension
Kit 1/8" up to 1"
5 0.800 LB
43405
Toilet Flange Extension
Only 5/8"
6 0.800 LB
43406
Toilet Flange Spacer Kit
1/8", 1/4", 1/2", 3/4"
12 0.900 LB
43410
Toilet Flange Spacer
Kit 3/4"
12 0.900 LB
43411
Toilet Flange Spacer
Kit 1/2"
18 0.400 LB
43412
Toilet Flange Spacer
Kit 1/4"
36 0.400 LB
43413
Toilet Flange Spacer
Kit 1/8"
72 0.050 LB
43440C
Toilet Flange Extension
Kit 1/8" up to 2-1/4"
5 1.200 LB
43446C
Toilet Flange Spacer Kit
1/8", 1/4", 1/2", 3/4"
12 0.900 LB
COMPLIANCE LISTING
IAPMO Listing File #5253
Markings: UPC, cUPC
DIRECTIONS FOR USE - 43400
1. Place foam gasket on the existing ange surface. Existing ange must be
without defects and properly secured to the suboor.
2. Next, determine spacer size, or combination of spacers required to correct
the ange height — spacers are offered in 1/8", 1/4", 1/2" and 3/4". Place said
spacer(s) directly onto foam gasket.
3. Take the yellow ange extender and push down to seal within foam gasket
opening. Push down until properly seated on top of red spacer(s).
4. Ensure Johni-Bolt slots are aligned for proper toilet bowl installation. Use 6
self-tapping stainless steel screws to fasten extender, spacer(s), and gasket to
suboor with use of power drill driver.
5. Install Johni-Bolts in slots (sold separately) and place standard wax bowl
ring (sold separately) onto yellow ange extender, which becomes new sealing
surface for toilet bowl installation.