Specification

SUBMITTAL SHEET: Johni Ring®
2
SPECIFICATIONS:
Johni Ring®
DIRECTIONS FOR USE
Johni-Ring for Floor Mounted Toilets: Remove wrapping. With bowl upside down on a protective
pad, place wax ting around opening. Plastic sleeve should face upward. Press wax ring firmly
into lace to assure adhesion when bowl is inverted. Carefully set toilet on bolts. Twist bowl slightly
and apply downward pressure to compress wax and bring base of toilet in contact with floor.
Tighten bolts. (Wax ring works best at room temperature.)
Johni-Ring plus for Urinals: Remove wrapping from wax bowl ring. Place wax ring firmly onto
urinal flange. Set urinal firmly against flange and tighten bolts evenly. (Wax ring works best at
room temperature.)
Johni Ring plus for Back Outlet Toilets: Remove wrapping from wax bowl ring. With bowl on
protective pad, have rear side of bowl face you. Place wax ring around outlet opening. Make
sure wax rung is firmly in place to assure adhesion. Carefully install toilet to drainage fittings. (Wax
ring works best at room temperature.)
PHYSICAL PROPERTIES
Specific Gravity: .82-.86
Solubility in Water: Insoluble
Appearance and Color: Golden wax
WARNINGS OR CAUTIONS
Read all cautions and directions carefully before using this product.
MATERIAL SAFETY INFORMATION
FOR MORE INFORMATION ON THIS PRODUCT,
REQUEST SAFETY DATA SHEET (SDS) 7620EFor
Delivery By Fax
Call 1-800-321-9535
Internet
See SDS section of www.Oatey.com
This product is defined as an “article” and is not classified as hazardous in accordance with
OSHA 1910/1200.
HMIS® ratings Health: 0
Flammability: 0
Physical hazard: 0