Submittal

Job Name Item #
Location
Engineer Contractor
PO # Tag
Representative
DEARBORN SAFETY
SERIES ADA COMPLIANT
TUBULAR COVERS
UNIVERSAL PLASTIC & SINK TRAP
(MASS CODE) TUBULAR COVER
SPECIFICATIONS
Design must open at 180° for easy installation and secure fit. Product
shall be form fitting to provide a long lasting aesthetic look. Product shall
be comprised of EVA foam material that will not fade or discolor over time,
and its flexibility must allow for easy accommodation for a secure fit around
supply line offsets. Product must accommodate both 1-1/4" & 1-1/2" plastic
tubular and brass sink traps with and without cleanout. Product shall have a
universal design that securely fits on both brass and plastic tubular with and
without wing nuts. Product will securely cover brass & plastic tubular without
having to clip or adjust wing nuts. Product must be certified antimicrobial per
ISO 846 Method C. Valve cover securely encloses supply stop, but is easily
removed when valve must be quickly closed.
APPROVALS & LISTINGS
IAPMO PS-94 - Insulated Protectors for P-Traps, Supply Stops, and Risers
ASTM C1822-2018 - Insulating Covers on Accessible Lavatory Piping
ASME A112.18.9 - Material and performance standard for exposed waste
and supplies for public/commercial and private/residential buildings
ASTM E84 (25/450) - Surface Burning Characteristics
ASTM G21 & G22, ISO 846 Method C (Anti-fungal, Antibacterial, Anti-microbial)
Canada Barrier Free Code
Oatey Co. | 20600 Emerald Parkway, Cleveland, OH 44135 | P: 1.800.321.9532 | oatey.com
FEATURES & MATERIALS
Access BIM/Revit content through www.oatey.com
Material EVA insulating material
Durometer Shore C
UV Resistance Will not fade or discolor
Fastening Secure fit hook and loop
Color White
Maintenance
Product can be cleaned with all common and
industrial cleaning agents
Painting Product can be painted with latex based coatings.
Trimming
Easily trimmed with all common cutting tools
(scissors, razor knife, shears, etc)
LCS 1046 | 8/19
DIMENSIONS
[A]: 2.9" [E]: 3.45"
[B]: 12" [F]: 5.10"
[C]: 7.8 " [G]: 2.2"
[D]: 1.52" [H]: 0.25"
A
B
F
C
D
H
G
E
A 2.9"
B 12"
C 7.8"
D 1.52"
E 3.45"
F 5.10"
G 2.2"
H 0.25"
SCALE:1:5
SIZE
A
MATERIAL
DO NOT SCALE DRAWING
TITLE
DATE
DRAWN
CHECKED
SHEET 1 OF 1
1/4 .XX .020 1
DIMENSIONS ARE IN INCHES.
UNLESS OTHERWISE SPECIFIED
TOLERANCES ARE:
FRACTIONS DECIMALS ANGLES
.XXX .005
PART NO.
APPROVALS
AS SHOWN
N.A.
MOLD NO.
AND SHALL NOT BE REPRODUCED OR DISTRIBUTED
UPON REQUEST.
AND ARE TO BE PROMPTLY RETURNED
WITHOUT OFFICIAL WRITTEN PERMISSION FROM
ALL DRAWINGS ARE THE PROPERTY OF
ADA 108
SHEET 1 OF 1
CRITICAL DIMENSION
FOR INSPECTION
REV.
THIRD ANGLE PROJECTION
DRAWING INTERPRETATION
USING ASME Y14.5M