IDD-213LUser Manual (Rev. 1.0) Sinocastel Co., Ltd.
IDD-213LUser Manual Contents 1. Introduction................................................................................................................................ 2 2. Specifications ............................................................................................................................. 3 2.1 External Interface..............................................................................................................................3 2.2 Status Indicator....................
IDD-213LUser Manual 5.11 GPS Data Reporting in Sleep Mode........................................................................................15 5.12 Data storage/Supplementary Report in Dead zones.........................................................15 5.13 Trip Mileage...................................................................................................................................15 5.14 Trip Fuel Consumption .........................................................................
IDD-213LUser Manual 1. Introduction IDD-213L is an intelligent on-board diagnostic device with OBD II and SAE J1939/J1708 (Heavy duty) compliant, it features plug-and-play technology, could read diagnostic info from vehicle ECU and capture location data with built-in GPS, then send them to backend server for real-time remote diagnostic and tracking purpose. IDD-213L can also act as an in-Vehicle WiFi hotspot, up to 8 WiFi enabled devices can be connected to share high speed 4G LTE network.
IDD-213LUser Manual 2. Specifications 2.1 External Interface Product appearance as follows： 1. Standard OBD Connector Connect to the 16 pin on-board Diagnostic Link Connector (DLC). 2. Micro USB interface Connect the OBD to the pc with USB to set parameters 3.
IDD-213LUser Manual 2.2 Status Indicator Indicator Color Status Solid on – Searching for GPS signal / Failed OBD communication Fast Blinking (on 1s, off 1s) – GPS fixed / Failed OBD/GPS Light OBD communication Green Slow Blinking (on 2.5s, off 0.5s) - Searching for GPS signal / Successful OBD communication Double Blinking – GPS fixed / Successful OBD communication Solid off – GPS/OBD off Fast blinking (on 0.5s, off 0.5s)-No SIM card or network searching Cellular Light Blue Slow blinking (on 0.
IDD-213LUser Manual 2.3 Technical Parameters Mechanical Dimension 63mm (L) x 50mm (W) x 26mm (H) Weight 50g Interface OBD II connector: SAE J1962 SIM card slot: Micro SIM, Push-Push Type Storage 8MB FLASH Data Transmission Packet data (TDD/FDD/HSPA) Positioning Mode GPS ISO 9141-2 ISO 14230-4 OBD Protocol ISO 15765-4 SAE J1939 (Heavy duty) SAE J1587/J1708 (Heavy duty) Working Voltage Power Working Currency 6-axisIMU 9-36VDC Average Currency: <150mA@13.8/27.6VDC Max. Currency: <200mA@13.
IDD-213LUser Manual Frequency (IDD-213LA, US): Cellular FDD LTE B2/B4/B12 WCDMA/HSPA B2/ B5 LED Indicator Antenna GPS/OBD/Cellular Cellular Antenna Built-in GPS Antenna Built-in WiFi Built-in Working Environmen t Temperature Storage Temperature Humidity -30℃ ~ +70℃ -40℃ ~ +85℃ 5%～95%（no fog） 7
IDD-213LUser Manual 3. Device Configuration 3.1 PC TOOL Manager Connect to device via USB cable to the computer, use the PC TOOL to configuration all the parameters. 3.2 SMS Instructions SMS command is mainly for remote maintenance. The message content is text format. Default secret key is the last 6 digits of the device ID. The key can only be changed through PC Tool. SMS format is defined as follows: 3.2.
IDD-213LUser Manual 3.2.2 Get IP parameters Send SMS *SecretKey#get gprs#*, device will reply *get gprs#APN,User,Password,IP,Port*. e.g.: *123456#get gprs#* 3.2.3 Set domain parameters Send SMS *SecretKey#set domain #APN,User,Password,IP,Port*, device will reply *set domain#ok* or *set domain#fail*. e.g.: *123456#set domain# cmnet,,,obd.livetelematics.com,11088* 3.2.4 Get domain parameters Send SMS *SecretKey#get domain#*, device will reply *get domain#APN,User,Password,domain,Port*. e.g.
IDD-213LUser Manual 3.2.8 Enable/Disable WiFi Send SMS：*SecretKey#enable wifi#* Send SMS：*SecretKey#disable wifi#* device will reply：*enable wifi#ok/fail* device will reply：*disable wifi#ok/fail* eg：*123456#enable wifi#* 3.2.9 Query the working state of WiFi Send SMS：*SecretKey#get wifi#* device will reply：*ge wifi#enable/disable* eg：*get wifi#enable* 3.2.
IDD-213LUser Manual 4.2 OBD Port In general, the OBD port is located in the driver or passenger cabin, from the edge of dashboard on driver side to the border of 300mm. It is easy to touch by sitting in the driver's seat; the preferred location is within the area from steering post to the vehicle centerline.
IDD-213LUser Manual 4.3 Device Installation Before installing the device, please make sure device has been configured with necessary parameters including network parameters and working mode. Park the car and make sure engine is off, align the OBD connector of the device with the engine diagnostic port and simply push in place, ensuring the device is secure. There comes one beep indicating device is power on.
IDD-213LUser Manual Note: When device is the first time power on (plugged in), it will scan OBD protocol according to pre-configured working mode (ie, passenger car or heavy duty mode), the maximum scanning time can be up to 10 minutes, if no OBD protocol is detected during this period, device will auto change working mode to tracker mode, if OBD protocol is detected, device will keep its working mode.
IDD-213LUser Manual Log into www.livetelematics.com to check real-time monitor and trip reports.
IDD-213LUser Manual 5. Functions 5.1 OBD Protocols Device supports all legislated OBD II protocols, it is also SAE J1939 and SAE J1708 compliant. ISO 9141-2 ISO 14230-4 (KWP2000) ISO15765-4(CAN) SAE J1939 (Heavy duty) SAE J1587/J1708 (Heavy duty) 5.2 Data Encryption Data transmission between device and the server can be encrypted with AES 128bit, the AES key is generated by device randomly and sent to the server with encryption of RAS 2048bit.
IDD-213LUser Manual The sample rate for time interval can be 2-600s and default setting is 30s, for distance interval can be 50-5000m and default setting is 500m, for heading change can be 5-90° and default setting is 15°. There can be single or several groups of GPS data in one GPS message, determined by groups of GPS data per message, device will not report GPS message until it has collected specified groups of GPS data. Groups of GPS data per message can be 1-30 and default setting is 1.
IDD-213LUser Manual The sample rate can be 2-600s and default setting is 60s. There can be single or several groups of PID data in one PID message, determined by groups of PID data per message, device will not report PID message until it has collected specified groups of PID data. Groups of PID data per message can be 1-30 and default setting is 1.
IDD-213LUser Manual 5.15 Driving behavior monitoring Real-time detects bad driving behavior, including Speeding, high RPM, hard acceleration, hard brake, quick lane change, sharp turn and excessive engine idle time. 5.16 Alarms and Events Reporting Alarms and Events are reported when they are triggered or eliminated and there comes short beeps, beeps are disabled by default.
IDD-213LUser Manual Sharp turn: 0.5g Crash: 1.5g Vibration: 0.08g Excessive engine idle time: 15min Fatigue driving: 240min 5.17 Working Mode Device supports 3 types of working mode: Passenger car, Heavy duty and Tracker mode. With tracker mode, device does not report diagnostic data, DTCs, trip fuel consumption and some alarms including high RPM, high engine coolant temperature,hard acceleration, hard brake, excessive engine idle time and MIL.
IDD-213LUser Manual 5.21 FCC Statement This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
IDD-213LUser Manual 6. Disclaimer This user manual only applies to IDD-213L device. The deviceis compatible with OBD II standard, it is also SAE J1939 and J1708 compliant. While some vehicles are not following those standards, therefore Sinocastel can not guarantee the OBD performance of the device with every vehicle. The GPS function may be affected in electromagnetic shielding area or bunker place. The device has a built-in cellular module.
IDD-213LUser Manual 7. Warranty If product got quality problem within the warranty period, please bring the product together with a valid warranty card and purchase invoice to the dealer for checking. Please do not disassemble this product, this may result in damage, Sinocastel will not be responsible for those problem. 1 year of warranty since purchase time and life-long maintenance.
IDD-213LUser Manual Maintenance Records Product Model: Faults and maintenance of records Date Fault Description Maintenance Maintenanc e (Signature) User (Signature) Note: This form must be carefully completed. 8. Statement Without written permission from Sinocastel, it is prohibited reproduce, transmit, distribute or save part or all of the contents of this document in any form. Sinocastel reserves the rights to modify or improve these products without any prior notification.
