User Manual

6
1. Mount Ballhead To Tripod
2. Converting Mounting Thread
3. Main Locking Knob Operation
oPErAtIon
The main locking knob locks
and unlocks the ballhead,
which allows you to change the
position of the camera. When
changing camera position
using the main locking knob,
always keep one hand on
the camera. Turn the knob
counterclockwise to unlock the
head and clockwise to lock it.
Ensure that the main knob is
firmly tightened before letting
go of the camera.
For tripods with a 1/4″ threaded
mounting stud: insert the
supplied reducer bushing into
the threaded mounting hole of
the head to enable a proper fit.
To mount the ballhead on the
tripod, first tighten all of the
knobs on the head. Then, being
careful to properly align the
tripod stud and the ballhead
hole to avoid damaging them,
rotate the ballhead clockwise
onto the tripod, and tighten it
by hand.