1.4
Table Of Contents
- Table of Contents
- Welcome to PlanetPress Connect 1.4.2
- Setup And Configuration
- DataMapper Module
- The Designer
- Mark Position Options
- Additional Text Settings
- Additional Image Settings
- Barcode Options
- Codabar Settings
- Code 128 Settings
- Code 39 Settings
- Additional Datamatrix Settings
- Additional EAN 128 Settings
- Additional EAN 13 Settings
- Additional EAN 8 Settings
- Additional Interleave 2 of 5 Settings
- Additional PDF417 Settings
- Additional QR Code Settings
- Additional UPC A Settings
- Additional UPC E Settings
- Additional OMR Mark Settings
- Keystore
- PDF Signature
- Copyright Information
- Legal Notices and Acknowledgements
From the File menu
1.
Click the File menu and select New.Click the Data mapping Data mapping Wizards
drop-down and select From CSV File.
2.
Click Next.
3.
Click the Browse button and open the CSV file you want to work with.
l
Take a look at the Preview box content to ensure that the file is the right one and the
encoding correctly reads the data.
l
Click Next.
4.
From the Select a CSV Configuration dialog, choose the proper settings:
Note
These settings are generally detected automatically.
l
Encoding: Choose the correct encoding to read the file.
l
Separator: Defines what character separates each fields in the file.
l
Comment Delimiter: Defines what character starts a comment line.
l
Text Delimiter: Defines what character surrounds text fields in the file, preventing
the Field Delimiter from being interpreted within those text delimiters.
l
Ignore unparseable lines: Ignores any line that does not correspond to the settings
above.
l
First row contains field names: Uses the first line of the CSV as headers, which
automatically names all extracted fields.
5.
Verify that the data is read properly and click Finish.
For a Database File
To create a Data Mapping from a Database file using the wizard, use the following steps:
From the Welcome screen
1.
Open the PlanetPress Connect Welcome page by clicking the icon at the top right or
select the Help menu and then Welcome.
2.
Click Create a New Configuration.
3.
From the Using a wizard section, select Database.
Page 47