1.4
Table Of Contents
- Table of Contents
- Welcome to PlanetPress Connect 1.4.2
- Setup And Configuration
- DataMapper Module
- The Designer
- Mark Position Options
- Additional Text Settings
- Additional Image Settings
- Barcode Options
- Codabar Settings
- Code 128 Settings
- Code 39 Settings
- Additional Datamatrix Settings
- Additional EAN 128 Settings
- Additional EAN 13 Settings
- Additional EAN 8 Settings
- Additional Interleave 2 of 5 Settings
- Additional PDF417 Settings
- Additional QR Code Settings
- Additional UPC A Settings
- Additional UPC E Settings
- Additional OMR Mark Settings
- Keystore
- PDF Signature
- Copyright Information
- Legal Notices and Acknowledgements
Additional Image Settings
The Additional Image dialog displays the properties of the image added in the "Additional Text"
on page 543 page.
l
Position group:
l
Orientation: Use the drop-down to select the orientation of the image.
l
Layer: Whether this image will appear behind the text (the text will print over the
image) or in front of the text(the text behind will be blanked out by the image, as
transparent images are not supported)
l
Left: Enter the distance between the left margin of the page and the image, in either
metric (cm/mm) inch (in) or point (pt) values.
l
Bottom: Enter the distance between the bottom margin of the page and the image,
in either metric (cm/mm) inch (in) or point (pt) values.
l
Filename: Use the browse button to select an image.
Note
Transparent images are not supported.
l
Scaling group:
Scaling the image expands the image but keeps the aspect ratio. The amount of scale
and specific limitations can be applied used a combination of the following options:
l
Max Width: Enter the absolute maximum width the image can be scaled to, in either
metric (cm/mm) inch (in) or point (pt) values.
l
Max Height: Enter the absolute maximum height the image can be scaled to, in
either metric (cm/mm) inch (in) or point (pt) values.
l
Scale: What scale to apply to the image. The maximum scale is 10.0 to 1. Decimal
values are allowed for this field.
l
Condition: Enter the condition which determines whether or not the image will be added
to the document at print time.
For details on how to create a conditional, see Conditionals page.
Page 547