1.8

Table Of Contents
With the scope set to 0 or steps.MOVELINES, verticalPosition represents the index of the line
to move to from the top of the record.
With the scope set to 1 or steps.MOVEDELIMITERS, verticalPosition represents the index of
the delimiter (as defined in the Input Data settings) to move to from the top of the record.
With the scope set to 2, verticalPosition is not used. The position is moved to the next line
after the current position that contains any text.
Example
The following line of code moves the current position in a text file 14 lines down from the
current vertical position (steps.currentPosition) of the pointer in the data, as long as it is on
the same page.
if(steps.currentPage > curPage) {
steps.moveTo(0, steps.currentPosition+14);
curPage++;
}
moveTo(scope, verticalOffset)
Moves the current position in a PDF file to verticalOffset where the meaning of
verticalOffset changes according to the value specified for scope.
scope
Number that may be set to:
l 0 or steps.MOVEMEASURE
l 1 or steps.MOVEPAGE
verticalOffset
Double. What it represents depends on the value specified for scope.
With the scope set to 0 or steps.MOVEMEASURE, verticalOffset represents the number of
millimeters to move the current position, relative to the top of the record (NOT the top of the
current page).
Page 290