1.8

allows. With no Performance Pack, PlanetPress Connect's Weaver engine can generate output
at 500 ppm (pages per minute). Additional Performance Packs increase this base speed per
engine.
Changes made to the following settings will be applied on the run (when the Apply button is
pressed), and do not require the OLConnect_Server service to be restarted.
l
Use one internal engine: Check to limit to a single instance of the server. Useful for
computers that run below the recommended system requirements (see "System
Requirements" on page27) or demo machines.
l
Total Engines Available: Read-only box indicating the current number of engines that
are active or available.
l
Local Engines Launched: Enter the total number of Weaver Engines desired on this
server. When changing the number of engines, it is necessary to save this dialog (Apply)
to actually apply the changes.
l
Speed Units Launched: Read-only box indicating the number of speed units launched.
l
Limit in license: Read-only box indicating the maximum number of speed units useable
to produce output.
l
Reserved Count: Read-only box indicating the total number of "Reserved" engines, as
set in the Speed unit reservations topic below.
l
Restart after (mins): Restarts the Weaver Engines at the selected time interval. If a job is
in progress at that point, the Weaver Engines will await job completion before restarting.
l Parallel engines/speed units per job:
l
Parallel engines/speed units per medium job: Enter the number of engines/speed
units that prioritize medium print jobs.
l
Parallel engines/speed units per large job: Enter the number of engines/speed
units that prioritize large print jobs.
l
Speed unit reservations:
l
Floating: Read-only box indicating the number of floating speed units that can be
used for any type of job.
l
Small job speed unit reservations: Enter a number of speed units reserved for
smallprint jobs.
l
Medium jobspeed unit reservations: Enter a number of speed units reserved for
medium print jobs.
Page 89