2018.1

are used internally. Therefor, URLs that rely on one of these parameters cannot be
used.
5.
With an external image, you can check the option Save with template. If this option is
checked, the file will be inserted in the Images folder on the Resources pane at the top
left.
If it isn't saved with the template, the image remains external. Note that external images
need to be available when the template is merged with a record set to generate output,
and that their location should be accessible from the machine on which the template's
output is produced. External images are updated (retrieved) at the time the output is
generated.
6. If the PDF file consists of more than one page, select the desired page.
Note
The number of pages in a PDF file can not be determined via the HTTP and
HTTPS protocols. If you wish to use a page other than page 1 in a remote PDF,
check the option Save with template; then click OK and reopen the dialog. Next, on
the Resources tab, select the PDF, and select a page.
7.
Click Finish.
8.
For each of the PDF files, select a position:
l
Fit to page stretches the PDF to fit the page size.
l
Centered centers the PDF on the page, vertically and horizontally.
l
Absolute places the PDF at a specific location on the page. Use the Top field to
specify the distance between the top side of the page and the top side of the PDF,
and the Left field to specify the distance between the left side of the page and the
left side of the PDF.
9.
Finally, click OK.
Setting the paper's characteristics
To set a Media's paper characteristics:
Page 410