2019.2

Table Of Contents
Dynamic backgrounds
To make the background change based on the value of a data field, you may use the Dynamic
Background Script Wizard; see "Dynamic Print section backgrounds" on page816.
Alternatively you could write your own Control Script to set the background; see "Control Script:
Setting a Print section's background" on page893.
The settings in a script take precedence over the settings made in the Print Section Properties
dialog.
Setting the binding style for a Print section
In printing, Finishing is the binding style, or the way pages are bound together. Each Print
section can have its own Finishing settings, as well as the Print context as a whole; see
"Setting the binding style for the Print context" on page485.
To set the binding style of a Print section:
1.
On the Resources pane, expand the Contexts folder, expand the Print context and right-
click the Print section.
2.
Click Finishing.
3. Choose a Binding style and, if applicable, the number of holes.
Overriding binding styles in a job creation preset
A Job Creation Preset can override the binding styles set for the Print sections and for the Print
context as a whole. To bind output in another way than defined in the template’s settings:
1. Create a Job Creation Preset that overrides the settings of one or more sections: select
File > Presets and see "Job Creation Presets Wizard" on page1159 for more details.
2. Select that Job Creation Preset in the Print wizard, or send it to Workflow and select it in
the task that creates Print content; see "Generating Print output" on page1410.
Enabling double-sided printing (Duplex, Mixplex)
To print a Print section on both sides of the paper, that Print section needs to have the Duplex
printing option to be enabled. This is an option in the Sheet Configuration dialog. (See "Sheet
Configuration dialog" on page994.)
Page 495