2020.1

l
Hostname: Enter the IP, machine name or URL of the Print Server.
Default is localhost.
l
Port: Enter the port through which to communicate with the Print Server.
Default is 9340.
l
Username: Enter the username to authenticate to the Print Server.
Default is ol-admin. This is set on the server's "Security Settings" on page109.
l
Password: Enter the password to authenticate to the Print Server.
Default is secret.
l
Confirm Password: Re-enter the password above.
Print Measurements preferences
l
Units: Use the drop-down to specify the default measurements system used for
dimensions of the template and boxes. In addition it defines the coordinates/position of
box elements.
The default unit will be added automatically when geometry values are entered without a
unit in the Attributes pane or in the Box Properties dialog.
l Flip insert guide axis: Check this option to flip the axis on which guides are inserted.
Normally, dragging a guide from a horizontal ruler inserts a horizontal guide (see
"Guides" on page738). With this option checked, dragging a guide from a horizontal ruler
inserts a vertical guide.
The Print preferences also provides you with buttons to :
l
Test Print Server URL. This button is only available for the General Print Preferences. It
tests the Print Server URL settings made within that Preferences page.
l Restore Defaults. This option restores the preferences to Defaults. This applies to the
current Preferences page only, but not other Preferences.
l
Apply: This option applies the settings made within the current Preferences page, but
does not close the Preferences dialog.
Page 839