2021.2

l Send Templates and resources to Workflow: Check this option to send the
necessary resource files to the active Workflow instance on the local machine.
Without these files the Workflow configuration can be inspected, but it cannot be
tested; in order to test the configuration, you'll have to send the resources manually
(see "Sending files to Workflow" on page454).
Note
In order for this option to work, Workflow and the Designer must be installed
on the same machine. In addition, the PPMessenger service must be running.
By default, this service is always started automatically from the moment
Workflow has been installed.
l Email Info
l Sender Address: The email address entered here will be used as the sender as
well as the recipient of all emails.
l Mail Host: The address of the SMTP server through which the emails should be
routed. This may include a port number, e.g. :25. The default port is 25. Use 587 for
TLS.
l Use Encryption (TLS): Check this option to connect to the SMTP server using TLS
(Transport Layer Security, also called SSL). The TLS option should be enabled if
your SMTP server requires it.
l Use Authentication: Check to enable authentication on the SMTP server.
l Username: Enter a user name that has permission to send email through the
SMTP server.
l Password: Enter the password for the above user name.
COTG Timesheets - Project Wizard
The COTG Timesheets Project Wizard generates an entire Capture OnTheGo solution.
To start the Project Wizard, select File > New > Project Wizards > COTG Timesheets from the
menu.
For more detailed information about this project, and instructions on how to test and customize
it, see "Project Wizard: COTG Timesheets" on page146.
The wizard contains the following options.
Page 1004