2022.1

l Width: Select the width of the outline for each pie slice. (Equivalent to the
outlineThickness property; see: outlineThickness.)
l Color: Enter a color for the outline: a valid HTML hexadecimal color value (HTML
Hex Color) or a predefined CSS color (CSS color names), or click the colored
square to open the Color Picker dialog ("Color Picker" on page1017). (Equivalent
to the outlineColor property; see: outlineColor.)
l Opacity: Enter the opacity of the outline. 100 is fully opaque, 0 is transparent.
(Equivalent to the outlineAlpha property; see: outlineAlpha.)
Pie tab
Settings on the Pie tab correspond to properties of the AmPieChart class in the amCharts library;
see: AmPieChart.
l Pie Group: Defines how the pie chart is displayed in the template.
l Radius: Enter the radius of the Pie Chart as a percentage of the shortest length of
the containing <div> object (e.g. 30%) or in pixels. (Equivalent to the radius
property; see: radius.)
l Hole Radius: Enter the radius of the center of the Pie Chart to remove, in pixels or
as a percentage. The hole radius removes the center of the chart, creating a
doughnut hole pie chart. (Equivalent to the innerRadius property; see:
innerRadius.)
l Start Angle: Enter the starting angle of the first slice of the chart, between 0 and 360
(decimals are allowed). This essentially rotates the Pie Chart. Note that if a 3D
effect is added to the chart, the only accepted values are 90 or 270 degrees.
(Equivalent to the startAngle property; see: startAngle.)
l 3D Group: Creates a 3D effect if both settings in this group are higher than 0.
l Depth: The depth of the Pie. (Equivalent to the depth3D property; see: depth3D.)
l Angle: The Pie lean angle. This must be a value between 0 - 90. (Equivalent to the
angle property; see: angle.)
Labels tab
Settings on the Label tab correspond to properties of the AmPieChart class in the amCharts
library; see: AmPieChart.
Page 1052