2022.1

Note
Master Pages, Media and Duplex printing options can also be set in a Control Script (see
"Control Scripts" on page954 and "Control Script API" on page1466). This is especially
useful when you need identical sections with different settings.
General options
The first option defines Duplex printing, which also enables or disables the settings for the
Back side of each sheet.
If Duplex is enabled, you can also:
l Check Omit empty back side for Last or Single sheet to reset a page to Simplex if it
has an empty back side (no content and no Master Page). Thus changing a Duplex job
into a Mixplex job may reduce volume printing costs as omitted back sides aren't included
in the number of printed pages. On the other hand, depending on the printer type it may
reduce the print speed as well.
l Check Tumble to duplex pages like in a calendar. (On Portrait output, this would be
equivalent to short-edge duplex.)
l Check Facing pages to have the margins of the section switch alternately, so that pages
are printed as if in a magazine or book.
The Media rotation setting rotates the Media 0, 90, 180, or -90 degrees.
Sheet position options
With the option Same for all positions checked, the same Master Page and Media will be
applied to every page in the Print section.
When this option isn't checked, there are multiple groups, each defining the settings for pages
grouped by their position within the section as it outputs: First, Middle, Last and Single sheets.
Each group defines:
l Allow content on: Selects on which face of the sheet content is allowed.
If Front only or Back only is selected, the page acts as a Simplex page even though
Duplex printing is enabled. The other page may contain a Master Page, but no contents
will be printed on it. As such it does not count in the Content Page Number and Content
Page Count markers which can be inserted via the Insert menu (see "Page numbers " on
Page 1085