2022.1

and specific limitations can be applied used a combination of the following options:
l Max Width: Enter the absolute maximum width the image can be scaled to, in either
metric (cm/mm), inch (in), pixel (px) or point (pt) values.
l Max Height: Enter the absolute maximum height the image can be scaled to, in
either metric (cm/mm), inch (in), pixel (px) or point (pt) values.
l Scale: What scale to apply to the image. The maximum scale is 10.0 to 1. Decimal
values are allowed for this field.
l Condition: Enter the condition which determines whether or not the image will be added
to the document at print time. Use the button for selection options.
For details on how to create a conditional, see "How to Set Conditionals" on page1314
page.
Additional Barcode Options
When adding Barcodes in the "Additional Content" on page1274 page you can select from a
series of predetermined Barcode types.
To create dynamic barcodes, "Meta Data options" on page1245 must first have been set.
Metadata fields are required to create the association between the dynamic data used in the
print run and the barcode.
The options for each of these types are described on the following pages:
l "Australia Post Settings" on the next page
l "Codabar Settings" on page1281
l "Code 39 Settings" on page1285
l "Code 128 Settings" on page1283
l "Data Matrix settings" on page1288
l "EAN-8 Settings" on page1295
l "EAN-13 Settings" on page1293
l "GS1-128 Settings" on page1290
l "Interleaved 2 of 5 Settings" on page1297
l "Japan Post Settings" on page1198
l "KIXCode (Dutch Post) Settings" on page1200
Page 1176