2022.1

l Description edit box: An edit box for adding an optional Description to the
Additional Content entry.
l Position group:
l Orientation: Use the drop-down to select the orientation of the Barcode added to
the page.
l Output once per sheet: This option relates to Imposition printing (see Imposition),
also known as N-Up printing. Select this box to have the Barcode printed once per
sheet rather than once per document page.
Note
If Imposition options such as auto-positioning and scaling were selected,
these options won't apply to the Additional Content added to the physical N-
Up sheet.
l Left: Enter the distance between the left margin of the page and the Barcode, in
either metric (cm/mm), inch (in) or point (pt) values.
l Bottom: Enter the distance between the bottom margin of the page and the
Barcode, in either metric (cm/mm), inch (in) or point (pt) values.
l Royal Mail 4-state Mailmark C Properties group:
l Track height: The height of the small vertical centre bars, in metric (mm/cm). Value
must be between1.02 mm and 1.52 mm.
l Full bar height: Height of the tallest vertical bars, in metric (mm/cm). Value must be
between4.22 mm and 5.84 mm.
The ascender and descender bar heights are automatically calculated based upon
the Full and Track bar heights.
l Module width: Thickness of each bar in the Barcode, in metric (mm/cm). Value
must be between0.38 mm and 0.63 mm.
l Module spacing: The spacing between each bar, in metric (mm/cm). Value must be
between0.3 mm and 0.7 mm.
l Process Tilde:
This selection is not applicable to this barcode type.
Page 1213