2022.1

l General group:
l Include in output checkbox: This determines whether of not this Additional Content
entry should be included in the output or not.
It is checked by default for all new entries.
This option allow for "libraries" of Additional Content to be created in Presets,
libraries from which you can pick and choose what entries you wish to have
included, at time of printing.
l Description edit box: An edit box for adding an optional Description to the
Additional Content entry.
l Position group:
l Orientation: Use the drop-down to select the orientation of the Barcode added to
the page.
l Output once per sheet: This option relates to Imposition printing (see Imposition),
also known as N-Up printing. Select this box to have the Barcode printed once per
sheet rather than once per document page.
Note
If Imposition options such as auto-positioning and scaling were selected,
these options won't apply to the Additional Content added to the physical N-
Up sheet.
l Left: Enter the distance between the left margin of the page and the Barcode, in
either metric (cm/mm), inch (in) or point (pt) values.
l Bottom: Enter the distance between the bottom margin of the page and the
Barcode, in either metric (cm/mm), inch (in) or point (pt) values.
l USPSIMB Properties group:
l Track height: The height of the small vertical centre tracking bars, in inches (in).
Value must be between 0.039 and 0.057 inches.
l Ascender height: The height of the ascender bar.
This also determines the height of the descender bar and full height bars, in inches
(in). Value must be between 0.082 and 0.111 inches.
l Module width:Thickness of each bar in the Barcode, in inches (in). Value must be
between 0.015 and 0.025 inches.
Page 1222