2022.1

l Angle: Set Stapling or Stitching binding either horizontally, vertically, or at an angle
(as supported by printer).
l Item count: Select the amount of Staples or Stitches to use. The choice is between
the default amount or selecting a specific number using the Count option.
Tip
The options available to you in reality at print time will be printer dependent,
so you will need to know the capabilities of your printer, or leave the value set
to Default.
l Area: The area where the binding can be applied.
l Hole making group:
Hole making options are available only to Ring, Comb (wire and plastic) and Coil Binding
Styles. The selections will need to be made at run-time based upon the types of binding
options available that the printer supports.
l Number of holes: The number of holes to punch for the selected Binding option.
l Pattern Catalog ID: The Catalog IDof the selected Binding option.
Advanced Print Wizard navigation options
l Preview button:Click to launch a Proof Preview window, which displays how the printed
output would look based upon the currently chosen selections.
l Back and Next buttons:Used to navigate back and forth through all the selected options
within the Wizard. Up until the Print button is pressed, one can reverse all the way
through the wizard to return to the main selection page (the "Print options" on page1250
page) and add or remove printing options from the print run.
l Print button: Click to produce print output according to the current settings. This can be
done at any point within the Wizard, whether or not all the options selected in the "Print
options" on page1250 page have been completed or not.
l Cancel button:Cancels the Print Wizard, without creating any printout.
Sorting options
This page appears as part of the Advanced Print Wizard and the "Job Creation Presets
Wizard" on page1230.
Page 1239