2022.1

l GS1-128 Properties group:
l Height: Enter the Barcode height in either metric (cm/mm), inch (in) or point (pt)
values.
l Module Width: Specifies the width of the narrow bars. Changing this value to a
higher value will generally make the Barcode bigger.
l Check Digit marker: This character is used as a placeholder for the check digit,
which we be calculated at runtime. The character must be expressed in Hex.
l Group separator: This character is used to define group separation points. The
character must be expressed in Hex.
l Template: Specify an optional Barcode "template".
Examples:
l n13 defines a numeric field with exactly 13 digits.
l n13+cd defines a numeric field with exactly 13 digits plus a check digit.
l an1-9 defines an alpha-numeric field with 1 to 9 characters.
Elements can be combined using the '+' symbol.
l Print human readable text: Check to add a textual version of the Barcode
data.
l Placement: Use the drop-down to select whether to place the human
readable text above or below the Barcode.
l Font name: Use the drop-down to select the font with which to display the
human readable text.
Note
Vertically-oriented fonts (fonts whose typeface name begin with the at
(@) character) are not supported in Connect.
l Font size: Enter a font size for the human readable text.
l Process Tilde:
Check this option to process tilde characters in the data as special characters.
Note: with this option checked, any tilde that needs to be included in the output must be
escaped by adding another tilde: ~~.
Page 1292