2022.1

l Orientation: Use the drop-down to select the orientation of the Barcode added to
the page.
l Output once per sheet: This option relates to Imposition printing (see Imposition),
also known as N-Up printing. Select this box to have the Barcode printed once per
sheet rather than once per document page.
Note
If Imposition options such as auto-positioning and scaling were selected,
these options won't apply to the Additional Content added to the physical N-
Up sheet.
l Left: Enter the distance between the left margin of the page and the Barcode, in
either metric (cm/mm), inch (in) or point (pt) values.
l Bottom: Enter the distance between the bottom margin of the page and the
Barcode, in either metric (cm/mm), inch (in) or point (pt) values.
l EAN 13 Properties group:
l Height: Enter the Barcode height in either metric (cm/mm), inch (in) or point (pt)
values.
l Module Width: Specifies the width of the narrow bars. Changing this value to a
higher value will generally make the Barcode bigger. The EAN-13 barcode employs
a module width between 0.27mm and 0.66mm.
l Checksum: Use the drop-down to select how to deal with the Barcode
checksum:
l Ignore: Ignore checksum calculations.
l Auto: Add a checksum character to the Barcode if the initial value does not
validate. This is the default value.
l Check: Verify the Barcode has a valid checksum.
l Add: Calculate and add a checksum character to Barcode, regardless of
current value.
l Print human readable text: Check to add a textual version of the Barcode
data.
l Placement: Use the drop-down to select whether to place the human
readable text above or below the Barcode.
Page 1294