2022.1

included, at time of printing.
l Description edit box: An edit box for adding an optional Description to the
Additional Content entry.
l Position group:
l Orientation: Use the drop-down to select the orientation of the OMRMark added to
the page.
l Page Side: Select whether the OMRMark will print on the front or back of page.
l Output once per sheet:Option relates to Imposition (also known as N-Up) printing.
Select this box to have the OMRMark printed once per sheet rather than once per
document page.
Note
If Imposition options such as auto-positioning and scaling were selected,
these options won't apply to the Additional Content added to the physical N-
Up sheet.
l Left: Enter the distance between the left margin of the page and the OMRMark, in
either metric (cm/mm), inch (in), pixel (px) or point (pt) values.
l Bottom: Enter the distance between the bottom margin of the page and the OMR
Mark, in either metric (cm/mm), inch (in), pixel (px) or point (pt) values.
l Options Tab:
l Collation Level: Choices are:
l Document: Treats each document as a group and the group and match marks
will be set based upon the start and end of a document.
l Document Set: Treats each document set as a group and the group and
match marks will be set based upon the start and end of a document set.
l Draw Hot Spots: This adds a red rectangle around the location of each individual
mark in the output, allowing easier checking of the OMRmark logic.
l Line Options group:
l Line Thickness: Sets the thickness of each OMR mark line.
l Line Length: Sets the lenght of each OMR mark line.
Page 1311