2022.1

Next, you have to select the desired output type: PDF, PCL or PostScript Level 3. Each of the
output types is available in two variants. The 'Stationery' variants will include the virtual
stationery (stored in the OL Connect template) in the output. This is a setting in the Output
Creation Preset (see "Print settings" on page162).
Testing and running the project
Once the Sample Project has finished the installation, the project is ready to be tested.
1. Locate the Workflow configuration in the Configurations\Workflow folder and open it in
OL Connect Workflow.
2. Select the pr_prom_generate_output process.
3. Open the Debug ribbon and click Run.
In Debug mode, the first Input task is skipped and the process is executed using a sample data
file. This project is pre-configured to use the file: Sample Data.xml.
A successful test run results in a subfolder in the Workspace\Out folder, named after the
current month and year. The Print output is written to that subfolder. It consists of one file that
should have the proper file extension.
Running the project
Having tested the project, you will be ready to send it to the Workflow service; see Saving and
sending a Workflow Configuration in Workflow's Online Help.
To test the project, which then runs on the server, copy the Sample Data.xml file from the
Configurations\Data folder to the Workspace\In folder. The output should appear in the same
folder as before.
Project details
The letter template
The promotional letter is designed in the PR_PROM Letter template. It contains one Print
section (see "Print sections" on page518).
There are two Master Pages that are each applied to different pages in the Print section
(see"Applying a Master Page to a page in a Print section" on page539).
Page 160