7.0

You can embed the EOJ strings in the single job in one of two ways: either within the triggers or at the end of
input data.
This section describes how to construct a job by embedding EOJ strings within a trigger and how to construct
a job by appending EOJ strings to the end of input data. It also includes a procedure that explains how to
define an EOJ string for a document.
19.5.5 Troubleshoot Execution Problems
You should also be aware that there are two printer settings that can help you troubleshoot a problematic
document.
1. Print PostScript Error
If you enable this setting, the printer prints an error page if it encounters an error during document
execution. The error page reports the offending PostScript command and the status of the print stack.
Although these errors are terse, they are sometimes all you need to pinpoint and resolve the problem.
You can set this printer setting from PlanetPress Design.
2. Print in Hexadecimal Mode
Most printers let you print the incoming data exactly as it arrives at the printer, as hexadecimal values.
This is useful for determining exactly what characters the printer receives and for spotting unexpected
characters in the data stream, or characters that are not arriving in the proper order. The following table
shows the hexadecimal codes the printer dumps for a carriage return followed by a line feed, and a line
feed followed by a carriage return, respectively. The equivalent ASCII codes appear on the right.
Hexadecimal ASCII
0A 0D LF CR
0D 0A CR LF
Because a document page can generate hundreds of pages of hexadecimal code, if you print in
hexadecimal mode, you should be prepared to cancel the print job once the first few pages have
printed.
Printing a Document - Detailed Directions
Objectif Lune Inc. © 2009 310