7.0

To install a document in a PlanetPress Suite Workflow Tool installation not accessible from PlanetPress Design:
1. Verify the Conversion options and Resource options settings in the Document properties dialog box are
the ones you want for this document.
2. From the PlanetPress Design Button, choose Send to | PlanetPress Suite Workflow .
3. In the Send to PlanetPress Suite Workflow Tools dialog, click Save PTK File.
4. In the Save PTK File dialog, enter the name of the file in which you want to save the PTK version of the
document and click Save.
5. Move the file to the DOCUMENTS folder of the PlanetPress Suite Workflow Tools installation in which
you want to execute the document.
To use the Send to Printer dialog box during a PlanetPress Design iWatch trigger installation:
1. In the Send to Printers dialog box, set the options for the install.
Select printers: Select the printer(s) on which you want to install the converted document.
Printer storage: Select the printer location.
Confirmation page: Select the type of confirmation you want to receive when PlanetPress Design
performs the installation. Select None to prevent a confirmation page from printing on each of the
selected printers after the install. In this case, nothing confirms the installation of the document. You
can of course subsequently print a listing of all documents installed on a printer to determine whether or
not the document installed. Select either Confirmation page, or Embedded confirmation page (less
accurate) to have each of the selected printers print a confirmation sheet reporting the success or failure
of the installation.
2. Click OK.
Installing a Document Trigger in the Codehost BrightQ Software
Send compiled PlanetPress Design documents and associated triggers to UNIX and Linux print spooler systems
using Codehost’s BrightQTM protocol.BrightQ is a third party printing suite that runs on Unix Linux operating
systems.
To send a document to a UNIX or Linux print spooler system:
1. Verify the Conversion options and Resource options settings in the Document properties dialog box for
the document.
2. From the PlanetPress Design Button, choose Send to | Host.
3. In the Host Type box, select Codehost BrightQ.
4. Set options for document output.
Host name or IP address: Enter the host name or the IP address of the UNIX or Linux workstation.
PlanetPress Design transfers the document to the UNIX or Linux workstation and print spooler system
using TCP/IP. Be sure to specify the accompanying password.
Port: The default port number is 5662. The port number may be modified under the specification of the
network administrator. PlanetPress Design must connect to the specified TCP port and send a document
conforming to the following port specifications.
Password: Enter the password for the workstation.
Document name: Enter the file name for the converted document. This must be a file name, not a
path. The name must be no longer than 10 characters.
Printer storage: Select the printer location of the installed document. PlanetPress Design sends both
the trigger and compiled document.
Force PostScript mode: Select this option when the destination printer is used for printing jobs in
other formats such as PJL, and when PlanetPress is not sending the output to the printer’s hard disk.
When this option is selected, PlanetPress Design inserts the following command statement
[Esc]%-12345X@PJL ENTER LANGUAGE = POSTSCRIPT
to precede the document as well as any other command
statement.
Save Host File button: When clicked, saves the document as a postscript file in a specified folder.
Send to Host button: When clicked, sends the document from PlanetPress Design to BrightQ.
Sent to Printer button: When clicked, sends the document only to the printer. Once you choose that
option the window remains open.
5. To output the document, click Save Host File, Send to Host, or Send to Printer.
Previewing and Installing Documents - Detailed Directions
Objectif Lune Inc. © 2009 335