7.4

To open the Access Manager
l Open PlanetPress Design or PlanetPress Workflow Configuration Tool.
l In the Ribbon, go in Tools | Managers | Access Manager.
The Access Manager dialog box is displayed. It lists all IPand IPranges that have PlanetPress Design, PlanetPress Suite
Workflow Tools, PlanetPress Fax or PlanetPress Image installed in the same network.
To add a new entry in the list
l Open the Access Manager
l Make sure you are in the Messenger tab.
l In the IPaddress box, enter the IPaddress of the remote machine.
l
Click on the button.
The format of the IP address must be one of the following:
l 127.0.0.1: The local computer. Typically this IP should have all the accesses checked.
l 255.255.255.255: Everyone on the same subnet. This is equivalent to hard-coding the current subnet, such as
192.168.1.255 or 10.0.0.255.
l 192.168.0.42 : A single IP address. This can be any valid address on the same subnet.
l 10.0.255.255:Any IPin the 10.0.X.X range.
The following considerations are to be understood when using the Access Manager to configure IPlimitations:
l Each permission type (column)is evaluated from top to bottom (column per column)in the order they are visible in the
Access Manager window. This means that wide ranges should always be at the top to increase performance. For
Tools and Utilities
©2010 Objectif Lune Inc - 646 -