7.4

Trigger: Document location:
%!PS-Adobe
<CR><LF>
(PAY) run 3 PAY
<CR><LF>
In this example, the document named PAY is loaded from the printer’s hard drive to RAM. The trigger executes
version 3 of the PAY document which is stored in RAM.
<CRTL-D>
%!PS-Adobe
<CR><LF>
(Accounting\PAY)
run 3 PAY
<CR><LF>
Accounting folder of a printer with a single hard drive. This example uses a relative path (a back slash does not
precede Accounting). Whether you use an absolute or relative path depends on your printer configuration. For
example, a printer may not have access to the root folder of its disk when it is running in PostScript mode, and
would thus require a relative path.
<CRTL-D>%!PS-
Adobe
<CR><LF>
(%admin%PAY)
run 3 PAY
<CR><LF>
Hard drive named “admin” of a printer. Printer may or may not have more than one hard drive.
<CRTL-D>%!PS-
Adobe
<CR><LF>
3 PAY
<CR><LF>
Random Access Memory (RAM) of a printer.
<CRTL-D>%!PS-
Adobe
<CR><LF>
(%flash%PAY)
run 3 PAY
<CR><LF>
Flash memory of a printer.
Adjust Printer Settings
There are five printer settings you can set from PlanetPress Design: Form cache, Manual feed timeout, Wait timeout, Print
PostScript error, and Do Sys/Start.
To adjust printer settings:
1. Choose Tools | Managers | Printer Utilities.
2. In the Select information to request list, select Set printer’s advanced options.
3. In the Select printers list, select the printer(s) for which you want to adjust the options.
4. In the Advanced options area, adjust the options you want to set for the selected printer(s).
Max form items: Set the size, in bytes, of the largest single EPS, PDF, or bitmapped image that the form cache can
contain. This option applies to all documents that execute on the printer. You use the size of the largest and most
frequently used image in your document to determine an appropriate value for this option.
Max form cache: Set the size, in bytes, of the PostScript printer form cache. This sets the cache size for all doc-
uments that execute on the printer. You base the setting for this option on the number of images in your documents,
their sizes, and how frequently each image repeats in a document.
Manual feed timeout: Enter the maximum amount of time, in seconds, you want the printer to wait for paper from
a manual feed before terminating the current job.
Wait timeout: Enter the maximum amount of time, in seconds, you want the printer to wait for input before ter-
minating the current job.
Do Sys/Start: Select to have the printer execute its Sys/Start file at boot time.
Print PostScript error: If the printer encounters a PostScript error during execution of a job, it terminates the job.
Select this option to have the printer print an error page that reports the offending PostScript command and the status
of the print stack. This can be useful in debugging a document.
5. Click OK.
©2010 Objectif Lune Inc - 653 -