7.4

1. Verify the Compilation options and Resource options settings in the Document properties dialog box are the ones you
want for this document.
2. From the PlanetPress Design Button, choose Send to | Host.
3. In the Host Type box, select Codehost BrightQ.
4. Set options for document output.
Host name or IP address: Enter the host name or the IP address of the UNIX or Linux workstation. PlanetPress
Design transfers the document to the UNIX or Linux workstation and print spooler system using TCP/IP. Be sure to
specify the accompanying password.
Port: The default port number is 5662. The port number may be modified under the specification of the network admin-
istrator. PlanetPress Design must connect to the specified TCP port and send a document conforming to the following
specifications.
Password: Enter the password for the workstation.
Document name: Enter the file name for the converted document. This must be a file name, not a path. The name
must be no longer than 10 characters.
Printer storage: Select the printer location of the installed document. PlanetPress Design sends both the trigger and
compiled document.
Force PostScript mode: Select this option when the destination printer is used for printing jobs in other formats
such as PJL, and when PlanetPress is not sending the output to the printer’s hard disk. When this option is selected, Plan-
etPress Design inserts the following command statement
[Esc]%-12345X@PJL ENTER LANGUAGE = POSTSCRIPT
to precede
the document as well as any other command statement.
Save Host File button: When clicked, saves the document as a postscript file in a specified folder.
Send to Host button: When clicked, sends the document from PlanetPress Design to BrightQ.
Sent to Printer button: When clicked, sends the document only to the printer. Once you choose that option the win-
dow remains open.
5. To output the document, click Save Host File, Send to Host, or Send to Printer.
A message appears indicating the document has been sent successfully, otherwise an error message appears. If you
want a printer based document sent through Codehost BrightQ, first send the document to the printer, and then send
the document to Codehost BrightQ.
Install a Document
Once a document is ready to be used, it must be sent to a location where it will be used for merging with a data file and output.
A document can be sent (or installed)in multiple locations.
Before sending your document, verify that the Conversion options and Resource options settings in the Document properties
dialog box are the ones you want for this document.
Install a document on one or more printers
1. From the PlanetPress Design Button, choose Send to | Printer....
2. In the Send to Printers dialog box, set the options for the install.
l Select printers list: Select each of the printers on which you want to install the document. If the printers on
which you want to install the document require either a password, a hard drive path, or both, be sure you have
set these properly in the Document properties dialog box (see Set Up a Document).If two or more of the printers
you select require different passwords and/or hard drive paths, you must perform separate installs for each,
making the necessary adjustments in the Document properties dialog box before performing each install.
l Printer storage: Select the printer location. When PlanetPress Design converts the document, it includes the
PostScript code to install the document in the selected location. The locations are Hard Drive, Flash and RAM.
Document Output and Preview
©2010 Objectif Lune Inc - 673 -