7.4

l In PlanetPress Suite 7.3.0 and higher, the PTZalso contains a PDFpreview of the document's output, multiple data files
with their associated metadata and an XML file detailing the emulation used by the document.
You can verify that a given installation succeeded by navigating to the Documents folder of the appropriate PlanetPress Suite
Workflow Tool installation and locating the .ptk file for the document. The .ptk file bears the same name as the PP7 file for
the document. For example, if the name of your document is invoice, the name of the PP7 file is invoice.PP7 and the name
of the .ptk file is invoice.ptk.
Save a PTK or PTZfile to send to a remote PlanetPress Workflow installation
1. From the PlanetPress Design Button, choose Send to | PlanetPress Suite Workflow .
2. In the Send to PlanetPress Suite Workflow Tools dialog, click Save to file... (previously Save PTKFile ).
3. In the save dialog, a button letsyou choose between the PTK and the PTZ format. Enter the name of the file in which
you want to save the document and click Save. The produced PTK or PTZ file can be sent via any method and imported
into PlanetPress Workflow.
Send a document to PlanetPress iWatch or a UNIX or Linux CodeHost BrightQ print
spooler system:
1. From the PlanetPress Design Button, choose Send to | Host.
2. In the Host Type box, select Codehost BrightQ or PlanetPress iWatch.
3. Set options for document output.
l Host name or IP address: Enter the host name or the IP address of the target host. Be sure to specify the
accompanying password.
l Port: The default port number is 5662. The port number may be modified under the specification of the net-
work administrator. PlanetPress Design must connect to the specified TCP port and send a document con-
forming to the following port specifications.
l Password: Enter the password for the workstation.
l Document name: Enter the file name for the converted document. This must be a file name, not a path. The
name must be no longer than 10 characters.
l Send Group:Defines what to send to the target host
l Trigger:Sends the trigger definition to be used when printing.
l Printer storage: Select the location where to send the file. In the case of CodeHost BrightQ,
this is the only option enabled in the Send group, and both the trigger and document are sent
together.
l Document:Only sends the document to the host.
l Force PostScript mode: Select this option when the destination printer is used for printing jobs
in other formats such as PJL, and when PlanetPress is not sending the output to the printer’s hard
disk. When this option is selected, PlanetPress Design inserts the following command statement
[Esc]%-12345X@PJL ENTER LANGUAGE = POSTSCRIPT to precede the document as well
as any other command statement.
4. Save Host File button: When clicked, saves the document as a postscript file in a specified folder.
5. Send to Host button: When clicked, sends the document from PlanetPress Design to BrightQ.
6. Sent to Printer button: When clicked, opens the Send to Printer dialog (see above in this topic).
If you want a printer based document sent through Codehost BrightQ, first send the document to the printer, and then
send the document to Codehost BrightQ.
Document Output and Preview
©2010 Objectif Lune Inc - 675 -