7.4

Data Capture from PlanetPress Design
Once a shared Windows printer queue using Objectif Lune Printer Driver (PS) is installed on both the server and the client
sides, data capture can be achieved the same way as with any other Windows printer queues.
Data Capture from PlanetPress Design:
1. Start PlanetPress Design.
2. Choose Tools | Data Capture | Windows Queue Input.
3. Select a Windows print queue using the Objectif Lune Printer Driver (PS) from the drop-down list.
4. Click Capture.
5. Start the windows application from which you want to capture data.
6. Open your selected document.
7. Click File | Print.
8. Choose the same Windows print queue as in step 4.
Note that steps 5-7 can be performed at any time, even if PlanetPress Design is not yet in data capture mode. This is because
every Windows printer queue using Objectif Lune Printer Driver (PS) is paused by default. Once the data capture has started,
it captures the first queued job. If there are more than 1 job, the user will have to use the data capture button again.
PDF Creation Parameters
PDF files retrieved from a Windows print queue using Objectif Lune Printer Driver (PS) have the following properties:
l PDF 1.4
l Optimized PDF (subject to change)
l No down-sampling of images
These settings are pre-configured and cannot be changed by the user.
About Metadata
Metadata files are files containing information on the job itself rather than containing the job per se. A job sent to the Objectif
Lune Printer Driver (PS) creates its own metadata, allowing users to retrieve relevant information, such as, for instance, the
time and date the print request was sent. For more on this, see the "Working with Metada" (page n)documentation
pages.
Document Output and Preview
©2010 Objectif Lune Inc - 683 -